Prints blank page even when used by itself

Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

unplug and let rest then replug and start again ( epson printers do this all the time)

To mutch time the printer stopped. first check ink level, and use clean internal program

I agree with Epson. Epson printers are very very hard to unclog. You can spend around $25 for a cleaning kit and *maybe* get it to work, or get a whole new printer that is faster and better quality for less than $100.

You can http://www.inkjetrefill.com/epson_clean.htm

Did you remove the little sticky tabs from each new cartridge? They allow air in, and ink out.

WON'T PRINT CX400 SAYS IT HAS AN ERROR WHEN ASKED TO PRINT

I have the same problem, I re-loaded the software, checked all the settings, went through set up procedures and nothing??????? I goes through all the motions, spits out the paper..........blank

Blank pages are indicative ofdried ink.

If the printer has not been used for a long time ink may have settled and dried in the heads.

You may need to replace the cartridges (IF they are very old) and run several head cleanings if there is no improvement.

I typicall try to print a few test pages to see if some of the color work.

http://www2.clicshop.com/Stores/metawatch2/Files/metawatchprintertestpage.pdf

Ahhh We love printers don't we??? Not!!! How did you clean the nozzles. Did you use the printers own maintenance system or did you do it manually. The printer can never clean them as well as you can manually, and this is probably 90% of the cause of blank pages. Clean rollers too while you are at it. Use a proper cleaning solution, and cotton buds, and clean where the cartridges go in, and the heads too. The next possibility is that the printer is set to pause, or print offline, go to your print settings, scroll down to properties and make sure thes two items are not checked. If so, unckeck them. Lastly, the drivers itself could be corrupted, and may need to download new updated drivers from epson website. Good luck

hi i am having roughly the same problems i use cad and have not even managed to print that far yet what windows are using?