Question about Kenwood KDC-519 CD Player

1 Answer

Kenwood KDC-MP922 I just got my battery changed in my car and now my Kenwood KDC-MP922 cd play will not flip open when my car turns on. Any suggestions would be great! Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

There is a button under the back of the face in one corner, just press around the back of the face with the car on until you feel the button press in and it should open.

If not you may have a bad ribbon cable that is not too expensive to replace.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have kdc-mp922 stereo bought from garage sale.wat is security code?how do I obtain access without knowing code?anyone know a way 2 reset code?

The anti-theft code cannot be bypassed. It wouldn't be much good if it was so easy to defeat.

The only way to get your radio working is to enter the correct security code. Enter the search term "Kenwood radio code" into your search engine to find suppliers who claim to be able to sell you a code, but they need the radio serial number in order to assist you. Be careful who you use though, some companies just take your money, provide a useless code and refuse a refund so try and research the supplier before sending any money. If the supplier is bad then there will be plenty of complaints online about them.

Sep 11, 2010 | Kenwood KDC-MP922 CD Player

1 Answer

What does toc read mean?

Toc read is an error that arises when the laser arm gets stuck, it needs to be moved somehow to reset it's self

May 04, 2010 | Kenwood KDC-MP922 CD Player

1 Answer

Toc error when play cds

need to press the rest botton and hold while you turn the unit back on and it should rest,if not the laser has an error.

Apr 20, 2010 | Kenwood KDC-MP922 CD Player

1 Answer

Unlock code for kdc-mp922

Hi tallmanjp

If you are having troubles, getting the code to work, try the procedure written here for unlocking the unit. Good luck, hope it sorts out your problem. Thanks for using FixYa. Cheers


Dec 13, 2008 | Kenwood KDC-MP922 CD Player

5 Answers


you have to activ ate the aux port form the menu, on standby hold the menu button and then use the control knob on the right to change the aux to on1

Sep 18, 2008 | Kenwood KDC-W3037A CD-receiver,...

1 Answer

Reseting cd player

is it connected to your ignition if so then unplug the cd first and them your battery in this sequence negative first then positive and wait ten secs.then reconnect with positive and then negative and then replug the cd.

Jul 12, 2008 | Kenwood KDC-MP528 CD Player

1 Answer


Hi Jeka65,

I think you need to have at least 11 volts or more on the yellow and the REd wires for it to turn on. Using a volt meter set on DC volts and at least a range of 20Volts, you can read the REd wire to the Black wire and see if you have at least 11 volts. Do the same for the yellow wire and reference to the black wire. you need at least 11 volts, Your car should be running about 13.6 volts across the battery.

Nov 22, 2007 | Kenwood KDC-X659 CD Player

Not finding what you are looking for?
Kenwood KDC-519 CD Player Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides