Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Printing light on one left side

I just moved and it appears that the person who carried the Konica Minolta magicolor 2400 did not keep it level. When I print the print is very faint at the left margin. Once the printing is about an inch into the page it prints fine. How do I level the toner so this will not happen?

Posted by on

  • bruceker Oct 14, 2008

    Same problem but did not originate from any move(ment). Printer has been stationary for its' life but has begun the faded printing on left side but prints clear by the right had side. Any suggestions?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 210 Answers

Remove each toner and shake it well for a few times. After this, put it back.

Posted on Sep 03, 2009

1 Suggested Answer

  • 1 Answer

SOURCE: Konica Minolta magicolor 2400

1/4 paper do not print out.

Posted on May 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to deactivate toner colour errors?


if any toner ends in a printer, then replace it.otherwise error will show continuously.

Apr 22, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

Where can I purchase a replacement fuser for konica minolta magicolor 2400w


Hi,

You could buy it from :-

http://cgi.ebay.com/Konica-Minolta-Magicolor-2400-2400W-2430DL-2450-Fuser_W0QQitemZ180400879568QQcmdZViewItemQQptZPrinter_Accessories?hash=item2a00baf7d0

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 05, 2010 | Konica Minolta magicolor 2400 Laser...

2 Answers

Konica Minolta Magicolor 4690MF gives 0502 error.


machine trouble 0092 service call
This happen after I cleaned the waste box for Konica Minolta Magicolor 1600W

Aug 05, 2009 | Konica Minolta Magicolor 4690MF...

1 Answer

Toner smudges on paper after printing usually on


check the two levers with an envelope on each, to the left and right of the fusing unit, should be pressed down and not rise up.

Jun 30, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

I have a konica-minolta magicolor 2400 which is printing a line down the right side. I changed the developer drummer, but it did not solve the problem.


If the line is white (no toner is added in that area) check the laser head glass which is located right below the drum. Remove the drum and you should see it below a narrow strip of glass. Just be sure to be clean, with no dirt, toner or pieces of paper on it.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jun 17, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Color line along side of copies; doesn't always print; error message keeps blinking (no manual),


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

May 27, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica Minolta Magicolor 2400W drum cartrige-how to replace?


Did you buy a whole new drum unit, or just change the cartridge? If so, the fuse may still be blown. Also, you may need to empty the spent toner out of the old cartridge.

Oct 07, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Says ready, error light blinking, vertical non-print line


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Aug 13, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica Minolta Magicolor 2400W -- Only Prints on Reboot!


I've had that problem before too, and found out that there were copies of the printer that had somehow installed themselves on my computer. All I needed to do was to choose to print with "konica minolta copy 1" instead of the one that I *thought* was installed and it worked. I then deleted the original printer and just stuck with the copy.

Jul 22, 2008 | Konica Minolta magicolor 2400 Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...