Question about Xerox Fax Machines

1 Answer

How do I enter the User ID codes for a Xerox CopyCentre 275?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

The Tools menu is used to set up machine parameters. The menu is protected by a system password, referred to as the System Administrator password. The default system password is 1111.

NOTE: If the System Administrator password has been changed or forgotten, contact Support for additional assistance.

  1. Press the [Access] or [Access A] button on the Control Panel to enter the Tools Mode. The Login screen will be displayed.

    How do I enter the - wcpro55-contl-pnl-access.jpg

  2. Enter your password using the numeric keypad on the Control Panel, and then select [Enter] on the Touch Screen. The Pathway Options screen will be displayed.

    NOTE: The default password is 1111. The password will be displayed as an asterisk (*). If you make a mistake, press the [Clear (C)] button on the Control Panel and re-enter the password. To cancel the operation, press the [Cancel] button. If you are experiencing problems with your password or have forgotten your password, contact your administrator.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Half print from the Bypass tray:


Change the paper settings of bypass tray for required size in settings menu.

Nov 21, 2014 | Xerox WorkCentre 5687 5675 5665 165 275...

1 Answer

Service manual for Xerox XE62 wanted


There is no service manual available but hope the "User Guide" might be helpful.

You can download it @ http://www.support.xerox.com/support/xerox-workcentre-xe62/documentation/enza.html

May 29, 2011 | Fax Machines

1 Answer

I have a xerox 5312/5214 Copier and it is showing a message of U4. In the manual it says to call for service. The machine is an older machine and I don't know how much it would cost to fix. Is there...


The U4 code means you have a fser heat problem. The fuser is the assembly that heats up and "fuses" the toner onto the paper. It is located near where the paper exits the machine. There is a reset procedure you can use to try and see if the code will reset. If it does not then you would need to have it serviced. It is quite old and there is a concern wether it would be worth repairing. I would use www.partsdrop.com to get parts or more information if you need to persue a repair. I have used them quite a bit in the past.
Good Luck and Thank You for using Fixya.
Wheatland Services
Diagnostics:
To enter diagnostics: Turn on the copier while holding the '0' button...all control panel lamps will light.
To enter a code: Enter the first part of the code followed by the 'Start' button, then the second part of the code followed by the 'Start' button again.
Note: If an invalid code is entered, 'Er' is displayed. Press 'Stop' and enter a new code. *To clear a fuser code: Enter diagnostics, enter '52' followed by 'Start'. If a fuser code is current, the number '1' will flash, enter '0' to clear the code followed by 'Start' to lock in your selection. Press 'Stop' and then you can shut down.

Feb 13, 2011 | Xerox Fax Machines

1 Answer

Can you add a new fax no that shows in the header for outgoing fax?


To set Outgoing Fax Number/ ID follow the follwing steps: -
- Press FUNCTION, Press 7 (Set mode will appear on display)
- Press 1 (User Parameters Settings)
- Press Set repeatedly until display shows ID
- Enter your Number/ ID (max. 20 digits) by using the key pad

For further information you may refer to User Manual for Panasonic Panafax UF-585 Page 29

Hope it helps! Good Luck!
CreativeTECH

Feb 03, 2011 | Panasonic Panafax UF-585 Plain Paper Laser...

1 Answer

Xerox copycentre C20 Can send a fax but not receive Help


Check if your telephone cable is connected at the " tel " plug on the fax machine

Apr 29, 2010 | Fax Machines

1 Answer

User´s guide


HELL, MY NAME IS STEVE, YOU ARE INTERESTED IN A OP MANUAL FOR THE BROTHER FAX 275 YOU CAN EITHER ORDER IT DIREC FROM BROTHER AT 908-704-1700 OR GO TO BROTHER.COM AND DOWN LOAD IT.

Jan 15, 2009 | Brother Personal FAX-275 Roll paper...

1 Answer

I can receive a fax, but I am unable to send one.


1. make sure the phone line is plugged into the socked on the machine marked "LINE"
2. Is the Machine ID and Phone nuymber entered into the memory? If not you can't send. Thats a legality.

Aug 13, 2008 | Xerox Fax Machines

1 Answer

Xerox Fax Centre F12 keeps giving me error code E3 when I am trying to receive a fax from one particular client. I can receive faxes from others without problem, and this client says he can send faxes to...


Looking through all the service documentation and engeneering tips, and also searching the Xerox.com database, I find no E3 code for a F12.
Do you have the ECM mode on your mechine set to "ON" ?
That is the error correction mode.
I really can't find an E3 message in service documentation.
I will download a user guide and see if I can find it there.

Apr 14, 2008 | Fax Machines

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Fax Machines Experts

Whit
Whit

Level 1 Expert

185 Answers

CheckitRight
CheckitRight

Level 3 Expert

1352 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Xerox Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...