I currently for sale have one 15" Cerwin Vega 400 watt 4 Ohm diecast frame with large dustcap, ribbed cone. This was removed from a demo only pair that had slight cabinet veneer damage. The speaker is in perfect condition -- suit replacement or sub. use

i believe you have a built in amp in receiver, so just do not push it, and its fine.

Yes. Contact CV for a replacement. Alternately, if you have a speaker refurbisher in your area, you can have them rebuild the one you have. There are only a few refurbishers/rebuilders in the US, so good luck.

you've got no chance of blowing the speakers,if their peak is 400 each & your amp only puts out 200wats per channel.

Standard lamp cord 18 gauge are large large (smaller number) will work. You'r enot doing arc welding through it. And it's cheap.

Ebay sell Cerwin Vega Surround (rubber bit) replacements. If he has ripped the cone too, appart from replacing his back legs with wheels (joke!), contact Cerwin Vega directly and they will send you out a new "driver". These are easily fitted at home by any one with a screwdriver

Cerwin Vega Pro Audio Home Audio Subwoofers Speakers Amplifiers Here is Cerwin Vegas web site. If their prices are too high, you can get a complete speaker from Ebay.

If these are Cerwin Vega speakers or any other for that matter thay need to be refoamed. See a local speaker repair shop about refoaming. Dont use them till you get them refoamed. It is like the speakers suspension and stops the driver from going to far in its excursion.

1000 ohm = to 500 wats
a 2000ohms = 1000 watts

first you need a multimeter set to OHM , check on the back of the horn , remove the leads and do some reading , it should read 4 , 8 , 16 ohms depending of the brand , if you get no reading its means that need to be replaced , some horns you can detach the back (magnet w/the coil ) so you can replace it without buying the whole unit . good luck

i need to know what the box dementions are for a 15 inch cerwin-vega subwoofer v max 1000 w peak power?