I AM IN THE PROCESS OF REMOVING A PROGRAMME A POP UP HAS APPEARED SAYING THE WRONG VOLUME IS IN THE DRIVE. PLEASE INSERT VOLUME CDA- DEFAULT-FULL INTO DRIVEE

try some formating toos .. like hiran boot cd or disk or diskformater ...u can use usb bootable device to install windows, u can make ur personal pen drive to bootable pen drive.

Please check how many Mb free disk space you currently have on your transcend device as the description of the pop up message sounds like the default error message from the operating system stating that the file you're trying to transfer is too large to fit on the destination drive. Perhaps try copying and pasting a smaller file first just to make sure that there's nothing wrong with the drive before attempting to transfer such a large file.

Insert the disc in your cd drive and it will pop up automatically. Enter the CD key and follow the instructions on screen. Leave everything to the default settings.

Hello ==) ^^

Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com

2 Open up 'My Computer'. You should see it under the list of available drives.

3 Check its contents first to make sure that you have the right drive.

4 In 'My Computer', right-click on the drive and choose 'Format'.

5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.

6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

reset to factory settings by removing the battery and then re-insert after a few minutes.

Click on Rip, bring down drop-down menu - change format to Mp3 - re-rip

the numbers are frequency settings that filter unwanted freq.
theres is not wrong setting just play with it till your satisfied with the sound.

It looks like your computer is trying to access a cd in your CD rom drive. I may be completely wrong on this, but this is from my past experience. So once you put that CD in that drive its ok and you let it do do what its trying to do, then after that you take the cd out. If E is not your CD drive, let me know.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

T.sonic cannot operate after it was formatted in Windows
Formatting T.sonic using the “Quick Format” or “Full Format” option in Windows destroys the
default format of the T.sonic. To retrieve the default format, you must link to
http://www.transcendusa.com/ and download the firmware updates for the T.sonic.