Removing the utility

1. Go into My computer > control panel > modems.
2. Check correct modem is installed. If not then remove modem > restart computer > re-install modem.
3. If still getting the same problem > go into control panel > networks > remove dial up adapter and TCP/IP > restart computer
4. Go back into control panel > re-install dial up adapter and TCP/IP.
5. Advise customer to get latest modem drivers.

You need to try restarting your computer and make sure that your receiver is plugged into your computer. I have this issue from time to time and this solves it.

Hi,

Please perform the following steps:

Power drain process:

1. Shut the computer down.
2. Disconnect the AC adapter and remove the battery.
3. Press the power button down for about 30-60 seconds.
4. Reconnect the AC adapter and the battery.
5. Restart the computer.

Alternately you can test your Notebook power by removing and inserting the Memory and Hard-Disk in their locations.

• Press the windows key + R
• you will get the run window under run type MSCONFIG
• Click OK You will get system configration window go to strtup and uncheck the programe you want to remove from the startup
• close the window you will get a prompt restart the computer.

yes you can remove this program

Just download this software open it click on browse enter you location example c:\program\abc

click on uninstall
and restart your computer and its done!


http://www.avast.com/eng/avast-uninstall-utility.html

I know is this is an antivirus removing utility but it also work for removing any kind of program

RESTART YOUR COMPUTER, ON REBOOT, CLICK F10 WHEN YOUR CHANGE BOOT OPTIONS SCREEN COMES UP. YOU MUST PRESS F10 QUICKLY OR IT WILL LOAD WINDOWS AND YOU WILL HAVE TO RESTART AGAIN. ONCE YOU GET INTO THE BIOS SETUP UTILITY GO TO SYSTEM CONFIGURATION, SCROLL DOWN TO BOOT OPTIONS CLICK ENTER. GO DOWN TO INTERNAL NETWORK ADAPTER BOOT AND ENABLE IT. GO TO EXIT AND SAVE.

Hi,

The best way to remove virus from your computer is :-

Step 1. Download free version of Malewarebytes AND superantispyware from http://www.itechguru.in/Download%20Links/Download%20Links.htm

Step 2 . Install it and update it from update tag >> check for updates.

Step 3. After that go to tag scanner and perform full scan.

Step 4. When scan complete click on show result and then click on remove selected.

Step 5. After removal it will ask you to restart your computer. Restart once.

And enjoy Virus/Spyware free environment.

iTechGuru
www.iTechGuru.in

Hi John, doing a reinstall is not advised unless you completely remove the software first. (Power off the printer).
Try removing all software for the 6200. Once all of the software has been removed restart the system. Check if the 6200 is still listed in, Printers and Faxes. (If it is listed delete it). Than download & install RegCure, which is a free program that will clean windows registry from all none needed keys. Download RegCure from this link:
http://www.pctuneuptips.com/recommends/clean/?gclid=CL2RiIrTmpICFSFMGgodODIPzg
Restart your system when RegCure has finished.
Now you can safely reinstall your printer software.

Good luck John!
Mike

Make sure the Connection Type is set to Static IP on the setup page of the router

try updating your windows OS..some components might need to be installed. Check also the website of zoom if they have a updated driver that may fix the issue.

You might also want to check some softwares/driver that may conflict zoom.