Question about Thomson Lands Phones

Open Question

Thomson STD 150 AU instructions

I have 2x phones and a base. he phones have lost connectivity with the base and I cannot seem to be able to pair them again. Any help would be appreciated.

Posted by on

2 Suggested Answers

  • 5 Answers

SOURCE: Instruction Manual for Thomson phones

http://www.home-electronics.net/ge/pc/IB/27851GE1_IB.pdf

Posted on Jan 09, 2008

CORDLESSGURU
  • 106 Answers

SOURCE: how to connect additional unit to base unit special code ?

Hello. Here is how you do register your handset below, and a link to the manual its on page 46. The procedure depends on how many handsets you have. If you only had one handset follow the directions below. If you have more than one handset follow the second set.

On the handset push menu, then dial 0 0
On the base, push and hold down the locator/intercom button until the charge light flashes
Press OK on the handset, and it should automatically register in a few seconds.

On the handset push menu, then dial 0 0
On the base, press select until you see the intercom number you wish to register it to. Stop there and push the Call button until the charge light flashes
Push OK on the handset, and it should register

Hope this helps


http://service.us.panasonic.com/OPERMANPDF/KXTG5631.PDF

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone will not connect to base stations. Handset says "Searching" and will not connect. I have tried to remove battery from handset and power plug from base multiple times, but nothing works.


check instructions for "pair" ...you may need to pair them before it sees the handset . there will be a button on the base and one on the handset ?

May 07, 2015 | Lands Phones

1 Answer

I forgot my password from the base station of the phone thomson telecom ce21816ge2-a. HOW CAN I FIX IT? (whithout going it to a phone technician to fix it)


You'll need to consult the user guide that came with the base station, and follow the instructions to reset the base station to its factory settings. I searched for a user guide online, but couldn't find one for you.

Hope this helps!

Dec 06, 2014 | Thomson Lands Phones

1 Answer

HOW DO YOU REGISTER A Thomson GE 27911FE1-A DECT 6.0 HANDSET TO IT'S BASE


Follow the instructions in the fourth column of the first page of this manual.

Nov 07, 2012 | Thomson Lands Phones

3 Answers

Unable to Pair Samsung Galaxy Pro with Supertooth Buddy. Have reset both many times. Tried pairing via handset but cant seem to locate the Supertooth buddy when scanning. My Supertooth Buddy worked with my...


it arises commonly because most of bluetooths cannot support more than one device(if once connected they dont connect to other device) ....

Oct 30, 2011 | Cell Phones

1 Answer

Phone lifter not working. light on top of base not lit up


Try re-pairing the headset to the Plantronics 500A base unit, it sounds like the headset may have lost connection with the base. Here is the link for the pairing instructions:

Plantronics 500A Pairing Instructions


Good luck from Headsets Direct!

Jul 06, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

Can I connect a CL82409 handset to a CL82409 base system


Yes, and no.
When you buy the new corded base station (CL84109) with 1 handset, that base unit by default is "paired" with only the 1 cordless handset that came with it.

While you can plug both base stations into the landline wall plugs (RJ-11), and when the line rings, both base unit phones will ring and will each operate as independent corded phones would.
But, in this scenario, the cordless phones communicate only through the base unit they are Paired with. The cordless phone paired with the CL84109 corded base unit will not be able to transfer or Intercom between the cordless phones paired with the CL82409 base unit.

However, if you want to transfer the cordless phones that originally came with the CL82409 base unit to work directly with the CL84109 corded base unit, you can likely "Pair" them to work directly with the CL84109 corded base unit for a total of 5 cordless phones to be paired to the CL84109 base unit.

Consult the User Guide that came with the CL84109 base unit for instructions on how to Pair additional cordless phoned to this base unit.

The CL84109 can be expanded and paired with up to 12 cordless phones. So, this should be do-able.

Keeping in mind that the CL82409 will no longer have any phones paired to it and will thus be useless from that point on. (unless you pair more expansion cordless phones to it again)

Mar 13, 2011 | AT&T CL82409 Cordless Phone

1 Answer

Headset not working. red light on base is flashing and yellow light is static; no blue light


It sounds like the headset may have lost connection with the base, try re-pairing the headset to the Plantronics 500A base unit. Here is the link for the pairing instructions:

Plantronics 500A Pairing Instructions

Good luck from Headsets Direct!

Feb 09, 2011 | Plantronics Voyager 500A Deskphone Adapter...

1 Answer

How do i set my blueant supertooth in discoverable mode? Lost the book and got a new verizon phone. Thanks!


Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Sep 24, 2009 | Blueant Blue Ant 091022 X3 Micro Bluetooth...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thomson Lands Phones Experts

kakima

Level 3 Expert

101507 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18355 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Thomson Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...