Question about EMC POWER SUPPLY ASSY-380WATTS Power Supply

1 Answer

Car DVD player sound quit working

We have a CY-VHD9500U Panasonic DVD player in our Yukon. It is wired to have the sound play through the stereo system of our car. It worked great with an unused radio station in the states. We brought the car to Germany and it worked for about an hour. We drove to a place where the station we were using was active and it automatically kicked the DVD player off of the station. Now we cannot get the sound to work at all. We have looked through the user's manual and called the installers. They are unable to help us. How do we program in a new station that will work for our system? Thank you, Denise Larson

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: Car DVD player sound quit working

Best thing to do in this thing is contact panasonic to see if its compadable with all these differaqnt places your going..see or call emc at 1-800-782-4362 they will fix ya up and tighten that sound gap!!!!

Posted on Apr 02, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi I have an Okia amp which is giving me problems i have just connected it to a new samsung 3 d tv and at times when i play the d v d i get out od sequenc speach with picture is ther anything i can do to...

It isn't likely the amp's fault, but rather the DVD player.
A model number for each device would have been helpful to give you a more detailed answer.

May 08, 2014 | Okia System Power Supplies

1 Answer

Panasonic car head unit CQ-VW120W, my aftermarket adaptor is missing 3 wires so I'm looking for pinout info. I know what all the colors are. I just need to know which pin numbers do what.

All parts and service manuals can be obtained by calling the Panasonic National Parts Center directly at 1-800-332-5368 9am-8pm EST during weekdays.

Sep 21, 2013 | System Power Supplies

1 Answer


Connect the "audio-output" (LEFT/RIGHT) channels from the A/V cassette-recorder to the "line-in" (LEFT/RIGHT) port on your computer.

Click the Windows START button.
Click All Programs.
Click Accessories.
Click Entertainment.
Click Sound Recorder.
Click Record.
On the A/V unit, press Play.
Now, the Sound Recorder should indicate that it is receiving sound.

May 17, 2010 | System Power Supplies

2 Answers

How do I power a SATA DVD drive? I have an Ultra 350 ATX supply. Tom.

There are actually adapters for SATA powered devices as long as you have the required SATA data cable connection to your motherboard.
Click here to see an example of this item from ebay.
All you would have to do is plug in the adapter into any free connection on your existing power supply and then plug in the SATA data cable both into your drive and the motherboard. There are actually SATA data cable adapters if you don't have that either, but i'll just stick to answering your question! (:

Dec 21, 2009 | Ultra (9PA3501609) 350-Watt Power Supply

1 Answer

Receiving no signal with converter box

Where is the "no signal" coming from, the converter box or tv? If tv then unplug the dvd player and plug the plugs into the converter so the wires go from the converter into the rf modulator. set the tv up to watch dvds and try your channel scan gain. If it works then post again and we'll figure out the best way to connect the converter and dvd to the tv.

Jul 30, 2009 | Apex Digital (AL-A300ATX) 300-Watt Power...

1 Answer

Analog card not working in tda100

you will still need to dial a 9 from the phone to get an outside line, or you can program the analog ext to auto dial it for you. If you still can't then it sounds like the phone is in the wrong COS so it doesn't have access to the CO's.

Apr 15, 2009 | Panasonic (KX-TDA0104) (KXTDA0104) Power...

1 Answer

I have a pair of JBL Platinum Series computer speakers that came with a Compaq Presario Desktop. I've since purchased a Dell Dimension 9200 Desktop and want to use the JBL speakers with it, but the power...

Go to the family dollar they have those wires that have both male ends. It is meant for ipods, and mp3 players so you can connect them to modern stereos that have inputs like that. I bought sevel of them because they are very usefull for about a few bucks each.

Apr 15, 2009 | Belkin COMPONENTS Computer AC Power...

1 Answer

Compressor quit working

It sounds like it burnt out, unless there is a fuse someware in the unit. Were you filling the tire while it was mounted on the vechicle. I had one in a couple of my vechicles over the years, and you really need to remove the tire, or they are actually lifting the car, which they are not meant to do.

Jan 02, 2009 | Vector System Power Supplies

1 Answer

Humming noise

IT sounds like the fan bearings are going out already, or have flat spots on them that cause vibration at speed. Try calling the manufacturer and tell them the fan either quit working or is about to quit.

May 08, 2008 | Okia / 450-Watt / ATX / 80mm Fan /...

Not finding what you are looking for?
System Power Supplies Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top EMC System Power Supplies Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

5660 Answers


Level 3 Expert

18257 Answers

Are you an EMC System Power Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides