Question about Mr. Coffee ISX23

1 Answer

Farberware FCP512S coffee pot instructions

Have lost the manual and have set the time, but have to keep pushing program and set buttons umpteen times before I can make the hour for brewing start flashing so that I can program the pot to begin brewing at a future time. By the time I do so, I can't remember how it happened. Could you tell me how to do so? Thanks for your help

Posted by on

  • robin45 Feb 11, 2009

    yes I cannot remember how to program this pot????

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

How to set the time:

Plug the unit in

Wait until the hour on the LCD starts blinking

Press the CLOCK button to set the correct hour

Press the SET button to switch to minutes

Press the CLOCK button to set minutes

Press the SET button to accept the time

***there is no AM icon, only PM***


How to program delay brewing:

Press and hold SET until the hour begins to blink

Press PROGRAM until you see the tiny bell icon on the bottom of the screen

Press CLOCK until you get to the hour you want to start brewing

Press SET to switch to minutes

Press CLOCK to get to the minutes you want to start brewing

Press SET to finalize

Press PROGRAM to activate. When the little bell is flashing, the coffee pot is set to go on at the desired time. While the coffee pot is on or in warming mode, there are vertical lines on the top of the LCD screen that shows you it is on. If you press the ON/OFF button, you can turn it off before the two hour keep warm cycle is complete.

Hope this helps

Posted on Apr 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Looking for manual for the Farberware 7 in one programmable pressure cooker


pressure cooker manual & recipe booklet library ' hip ...

www.hippressurecooking.com/pressure-cooker-manual-library/
Free downloadable copies of pressure cooker instruction manuals for stove top pressure cookers, ... Farberware Quick Cuisine Pressure Cooker Recipe Booklet.

FARBERWARE FCP412 USE & CARE INSTRUCTIONS ...

www.manualslib.com > Brands > Farberware Manuals > Coffee Maker
View and Download Farberware FCP412 use & care instructions manual online. ...Salton use & care instruction programmable coffeemaker fcm12ss (12 pages) ... TOLL FREE: 1-888-881-8101, Monday - Friday, 7:30 a.m. - 6 p.m. CST Please ...

Farberware 6-Qt Digital Pressure Cooker - Walmart.com


Jan 01, 2016 | Crock Pots & Slow Cookers

1 Answer

What makes a perculator heat?


Hi, If you have a Farberware, Just look into the bottom of the pot. There you will see what looks like a hole in the pot. That is the high heating element, under the pot, when you go to make coffee the pump ( rod) sits into the hole. When you turn it on to make coffee the high heating element that the pump is in gets very hot and starts pushing the water that is in the hole to the top (that is called perking) the hot water goes over the the top and the drops into the coffee, This keeps going on until the thermostat feels it has reached 190 degrees or close to it and turns the high element off. While this is running it's cycle the keep warn is on helping the water to get hot, when the main element is off the keep warm element that runs around the bottom of the pot stays on all the time the pot is plugged in. Should the coffee get to cold the thermostat will turn the main heating element back on until it is back to 190. This system was developed by Farberware and a lot of makers copied it, But Farberware sold the pots and was known for a FAST and HOT cup of coffee. Farberware started making them in China and the pots are having a hard time keeping it up to American standers, and parts are very scarce.Farberware USA pots have been around a long,long time and are still going strong . I hope this helped you to understand how the pot works.

Dec 09, 2010 | Faberware 12-55 Cup Coffee Urn

1 Answer

How do you program?


Hello!

This could help


How to set the time:
1. Plug in the unit. Wait until the hour on the LCD starts blinking
2. Press the CLOCK button to set the correct hour
3. Press the SET button to switch to minutes
4. Press the CLOCK button to set minutes
5. Press the SET button to accept the time
***there is no AM icon, only PM***


How to program delay brewing:
1. Press and hold SET until the hour begins to blink
2. Press PROGRAM until you see the tiny bell icon on the bottom of the screen
3. Press CLOCK until you get to the hour you want to start brewing
4. Press SET to switch to minutes
5. Press CLOCK to get to the minutes you want to start brewing
6. Press SET to finalize

Press PROGRAM to activate. When the little bell is flashing, the coffee pot is set to go on at the desired time. While the coffee pot is on or in warming mode, there are vertical lines on the top of the LCD screen that shows you it is on. If you press the ON/OFF button, you can turn it off before the two hour keep warm cycle is complete.

Please rate this answer. thanks

Nov 24, 2010 | Faberware FCP512S Cordless Electric Kettle

1 Answer

My coffee pot is not heating or perking the coffee grinds. Farberware FCP512S. I've tried to locate parts or buy a new one because I love it but have not been successful.


It sounds like the problem I've been having with all Farberware percolators lately. It sounds like the thermostat is bad, I called customer service and they are no help I was told that Farberware doesn't sell repair parts.I found a place in Miami Fl that can help. Goodman's at Goodmans.net their part number is 4FA-FTC and lists for $4.99 plus sh it's not an exact match it's slightly thinner then the original but with a little creativity it will work just fine I've fixed 3 percolators already

Nov 15, 2010 | Faberware Millennium FCP512S Coffee Maker

1 Answer

I need an instruction booklet to set the timer for the coffee.


Go to Hamilton Beach dot com, pull down customer suppot menu, click on use and care guides, type in product and model number, click send and your manual will load. Print it out so you have it. Setting the timer is a piece of cake, Hold down the program button until the clock flashes. While still holding the program button down, set the timer for whatever time you want the pot to perk. Let go of the program button. To check if the timer is set right right, puch the prigram button just long enough to see what time it is set for. If it's right, prepare the pot the night before, push the program button to set and forget about it. It will perk at the time you set every morning. Katherine

Jul 11, 2009 | Hamilton Beach BrewStation 47214 Coffee...

1 Answer

Doesn't perk long enough


Hi you have a pot made in China, 1 of 2 things are broken. 1 the thermostat, 2 the keepwarm element. 9 out of 10 times it is the thermo.You can not buy them in the USA. I have a auction on eBay and I cab make the parts out ob USA parts. Mt eBay name is ron622c, you can take a look. Go to Farberware coffee pot parts. Good luck. Ron

May 22, 2009 | Faberware FCP280 Coffee Maker

1 Answer

Need help on using Timer feature on Melitta Mill & Brew


My second one just died, and I am very sad, but I can help you with your question.
First you have to set the time. Do that by pressing the hour or minute buttons until the time blinks. Then you can press the buttons to set the time. AM/PM are differiented by a red dot coming on in the time display. You can set that as preferred.
To set the timer feature, press the time button until the time blinks. Then use the hr and min button to set your timer setting. Pay careful attention to match the am/pm button with what you want.- if you don't you will be 12 hour off. To use the delay, set up the coffee pot, then push time. The red time indicator will light. If you are using ground coffee press the mill button. If it is lit, the mill will not turn on. This goes for either timed brewing or present tense brewing.
THe coffee pot has a timer - it will shut itself off after 1 hour. If you want to restart it, just push the mill button and press the on/off button.

Mar 15, 2009 | Salton Melitta Coffee Maker 10 Cup - white...

1 Answer

Programing clock on saeco coffee pot


You can get the instruction manual for your machine at saecooutlet.com, Click on user manuals and then select your machine.

To set the clock, hold the hour or minute button until the display flashes then adjust the time.

Feb 01, 2009 | Saeco TDCM15 Renaissance Stainless Steel...

1 Answer

Keeps flashing 12:00


I just kept plugging and unplugging the coffee pot. Eventually, the clock stopped blinking, the buttons worked, and all was well.

Jul 19, 2008 | Cuisinart Grind and Brew 10 Cup Coffee...

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mr. Coffee Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Cindy Wells

Level 3 Expert

4954 Answers

Are you a Mr. Coffee Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...