Question about RCA RCR450 Remote Control

11 Answers

I can't find a code.

After holding down the component key, and pressing a number, it blinks four times, instead of once. What's going on?

Posted by on

  • 30 more comments 
  • travika Nov 12, 2007

    i need to get the codes for the remote

  • jackau Nov 13, 2007

    I have a philips remote REM110 and i lost my code. My TV is a JVC

    please where i can find the code for my remote.
    Thank's

  • Ellie Honey Nov 14, 2007

    I need the codes for my remote , not cheat codes, my roommate threw out my manuel and codes. Please help if you can. My remote is a Phillips universal remote, PM625S. Thank you.

  • griffmoney Nov 17, 2007

    need code for insignia tv

  • Anonymous Dec 02, 2007

    NEED MANUAL

  • rickardo1969 Dec 02, 2007

    Any body help me out on this one please.

    I have a nec lt154 projector without the remote

    cant get universal controls to work .

    Cant seem to find the codes anywhere

    Pleas does any body know the correct codes for this and will it work with a universal control

    Many thanks

    Rick

  • Anonymous Dec 08, 2007

    how do you set remote for symphonic trv

  • Anonymous Dec 09, 2007

    i can not find a code

  • Anonymous Dec 17, 2007

    i cant find any codes for my tv its a sharps

  • Anonymous Dec 18, 2007

    rca universal remote

  • tiffy2913 Dec 18, 2007

    rca universal remote control

  • Anonymous Dec 26, 2007

    need codes for this remote on a magnavox tv and how to program the remote

  • lillilbuu Dec 27, 2007

    i have an Emerson jumbo Universal remote and cannot find the code for verizon fios tv cable box. Can anyone help?

  • Anonymous Dec 27, 2007

    i cant get the remote control to work

  • Anonymous Jan 01, 2008

    need code manual for the device

  • Anonymous Jan 06, 2008

    need codes fro zenite remote control dor flat screen lg brand

  • Anonymous Jan 08, 2008

    NEED CODE FOR DVD MAGNAVOX

  • Anonymous Feb 03, 2008

    magnavox tv code

  • Kathy05 Feb 10, 2008

    I have a TOSHIBA TV, need code manual for Zenith ZN401 Remote Control . THanks!

  • lost55 Mar 02, 2008

    need dishpro 322 code for samsung plasma HP-T5064 50 in tv remote

  • ms lamb Mar 29, 2008

    I lost the booklet that had the codes.I have a panasonic tv and a vcr is a sharp ,could you help find the right codes for both the tv and vcr. Thank you

  • wmjr Apr 10, 2008

    I have 2 Sony remotes and 2 newer LCD TV's. Why can't I find the program codes for the newer tv's? They are an Astar LCD TV and a Vizio LCD TV. If anyone knows the codes, please let me know. Thanks.

  • Anonymous May 12, 2008

    lost the code book rca500 model thank you for your time

  • Eloraa May 18, 2008

    when i press the component key and start putting the 4 digit number it bliks 4 times before i finishh

  • TETEC511 May 26, 2008

    I Need the codes for Universal Remote Philmore PM-RC10?

    Can anyone help me out please???

  • sukie2 May 30, 2008

    will not work.. the tv light blinks more than once please help

  • anjcord96 Jun 10, 2008

    i need the codes for my directv remote for a NEC multisync lcd2335wxm tv

  • Anonymous Jun 15, 2008

    What are the steps to enter the codes?

  • colima48 Aug 05, 2008

    ineed to find code for my sharp tv for remote #6012

  • Anonymous Aug 06, 2008

    need codes for one for all universal remote control

  • Anonymous Aug 11, 2008

    can not program remote

  • Anonymous Aug 19, 2008

    I can't codify my remote commander RM-EZ4, my t.v. is LG

×

Ad

11 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Took me awhile but I figured it out

ok

Put your TV/DVD/VCR on
hold in what you want to program TV/DVD/VCR BUTTON
(you dont need codes or anything)
then while holding in what you want to program (TV, DVD, VCR) hold in ON/OFF
both at the same time

when the light comes on and stays on
keep hitting ON/OFF BUTTON
do it slow, when the TV turns off hit the STOP button at the bottom
then hit the button you just programed
then hit the ON/OFF button, the TV/DVD/VCR will turn on

if it doesnt work, repeat. make sure you hit the stop button when the TV/DVD/VCR shuts off, if you hit it an extra time while the TV/DVD/VCR is off it wont work.

took me about 30 mins to figure it out.

Posted on May 02, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a sony RM-V202 i need help 2 set it 2 my tv my tv have a d on it

Posted on Jun 10, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need the code for a rca rcr32723 3-device remote control

Posted on Jul 04, 2008



Its easy look at the video

Posted on May 09, 2008

Okay here's what I tried.I have an older Rca tv, I was using a generic remote.. I recently moved to a new apartment. I could no longer use this remote with my tv..It just wouldn't work. I tried all night long to reset the code..My Final conclusion was. Get tv model name and number. google it to find the original remote number and picture perhaps..Then I found places that sold them google (again).$35 on up and mostly obsolete. So, I decided I would take this picture of the remote to the flea mkt, and I found this remote for one dollar...I brought it home cleaned it up with damp clothe and tooth pick..Works like new, I feel kinda smart right now..LOL..Well another choice would have been to lug it to a tv repair shop and have a technician set it up ...But I saved a lot of money..and I am real glad.. Good luck..!!

Posted on Mar 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

FIND and Download an Operation/Owners manual for the Remote or in my case the VCR the remote came with, and look for codes there.

Posted on Dec 29, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This happened to me. then i found out that i was entering the code for the tv brand and not the remote control brand.
so if your remote is lg. put in the code for lg .
try this and let me know if your problem is solved.

Posted on Nov 10, 2007

  • canababe Nov 10, 2007

    make sure that u programme the remote for dvd.

×

Make sure that u hit the device (i.e. tv ) key after u hold the set-up key down. then input the code after the set-up key is released.

Posted on Jun 26, 2007

Heres a website with the codes. http://download.ethomson.com/english/UNBRANDED/ACCESSORIES/IB/CodeListADR560660.pdf

Posted on Apr 25, 2007

I ORDERED A UNIVERSAL REMOTE FOR MY V5500 VCR/DVD COMBO ... HOW DO I GET IT TO WORK ... IT WILL NOT DO ANYTHING ... HAVE THE DVD PACKAGE OF 24 HOURS AND CANNOT GET THE DVD TO ADVANCE TO NEXT HOUR ...

Posted on Jan 07, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 277 Answers

Hi maybe the batteries are weak..?? change them OR the remote is telling gently that you have entered a wrong code here you got all the codes you need: http://remotefinder.rca.com enjoy

Posted on Feb 26, 2006

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

SOURCE: I can't find a code.

need the code for a philips

Posted on Jan 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Step by step


What steps are you looking for? Also what is the problem? Also this may solve your issue

Copied from: voxrightnow

Programming the Remote:

Your universal remote can operate a variety of brands of components. In order for your universal remote to control your components, you need to program the remote with the codes that match the components (See Code List below). These codes enable the remote to communicate with your components. Each brand and each component has its own "language," and, by programming the correct codes into your remote, you tell the remote to "speak the same language" as your components.

There are two methods you can use to program your remote control to operate your components: Direct Code Entry and Manual Code Search and Entry. Most components can be programmed in one of these ways. Try them in the order listed.

In order to control combo TV/VCR or TV/DVD units, you must program both the TV key and the VCR•DVD key. Once programmed successfully, the TV key controls the TV functions on your unit, and the VCR•DVD key controls the VCR or DVD functions. There is a specific section in the Code List for combo units. The codes in this section should be tried first, using Direct Code Entry on the TV and VCR•DVD keys. If this is unsuccessful, follow the normal programming methods for both the TV and the VCR•DVD keys

Direct Code Entry:

To program your universal remote to control your components using the Direct Code Entry Method, follow the steps below.

1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).

2. Find the Code List below. Find the list for the component you wish to program. Find your component's brand. You will see a listing of four-digit codes for each brand. If your brand isn't listed, use the Manual Code Search method to program the remote control. (Refer to page 5 in the User Manual for Manual Code Search method, or scroll down in this Answer to the next section.)

3. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The LED indicator light turns on and remains on. If you release the component key any time during the Direct Code Entry procedure, the LED indicator light blinks four times, and the process is exited.

4. While holding down the component key, consult the Code Lists for the four-digit code that corresponds to your component's brand and use the number keys (0-9) on the keypad to enter it. While you are pressing the numbers, the LED indicator light turns off.

5. After the fourth number is entered, the LED indicator light turns on. At this time, release the component key. If the LED indicator light turns off, you have entered a valid code and have followed the correct procedure
for Direct Code Entry. If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the LED indicator light blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 3 and try the next code listed. The last programmed code under that component key is retained. Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control.

6. To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component's functions with the remote. If some of the features of your components do not work, try programming the remote with a different code in the list until you find the code that allows the remote to control the majority of your component's functions. Different codes can provide different levels of functionality.

Manual Code Search and Entry:

If your component's brand isn't listed in the Code Lists, or if you have tried all of the codes for your brand and the remote does not operate your component, try the Manual Code Search. This Code Search method cycles through all of the codes in the Code Lists in the event that your component's code is listed under another brand. The Manual Code Search method may take a long time because the remote searches through all of the codes in its memory for the code that operates your component. Therefore, if your brand is listed in the Code Lists, first try the Direct Code Entry method described on page 4 in the User's Manual also described above.

NOTE: To exit without saving any point in the Manual Code Search, press and release the GO BACK key.

1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).

Note: If you press an invalid key during the Manual Code Search, the remote does not respond and the LED indicator light does not blink. If you do not press a valid Manual Code Search key (TV, VCR•DVD, SAT•CBL, ON•OFF, GO BACK), the search times out after two minutes. When the search times out, the LED indicator light blinks four times and turns off. The last programmed code under that component key is retained.

2. If you are programming the remote to control your TV or satellite receiver, go directly to step 3. To program the remote to control a VCR or DVD follow the preprogramming method listed below.

Preprogramming the VCR/DVD Key

The VCR•DVD key can control only one component, either your VCR or your DVD. To program your remote to control either your DVD or your VCR, you must first put the remote in the proper programming mode. Follow these directions before proceeding to step 3.

a. Press and hold the VCR•DVD key. The LED indicator light turns on.

b. While holding down the VCR•DVD key, press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD. The LED indicator light turns off.

c. Release the VCR•DVD key. The LED indicator light blinks four times and then turns off. Your remote is now either in VCR or DVD Programming Mode, depending on which you chose. Proceed to step 3.

3. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The LED indicator light turns on and remains on.

4. While holding the component key down, press and hold the ON•OFF key. The LED indicator light turns off.

5. After holding down both keys for three seconds, the LED indicator light turns back on.

6. Release both keys. The LED indicator light remains on. Throughout the programming of each key, be sure to keep the remote pointed at the
IR sensor of the component you are currently programming the remote to control.

7. Press and release the ON•OFF key repeatedly until your component turns off. Each time you press the ON•OFF key, the LED indicator light blinks, and the next code in the list is sent. This process continues until all of the codes in the Code Lists have been searched. If your component
turns off, you have found the correct code. (If it cycles through and the LED indicator light blinks four times and turns off, all codes have been searched. The Manual Code Search method is exited.) Because there are so many codes, you may have to press the ON•OFF key many times-possibly up to 200 times.

8. Once you have found the correct code, you must save the new
code by pressing and releasing the STOP key. The LED indicator
light turns off. You must press the STOP key to save the code or the correct code will not be stored!

9. Once you press the STOP key, the code is stored.

Testing the Code for Maximum Functionality:

1. Once the code has been stored (see Manual Code Search and Entry Method above), use the remote to attempt to control a variety of the component's functions. If the code that has been stored controls the majority of the component's functions, programming is complete. If the
code stored does not give maximum functionality, you will want to try another code.

2. In that case, repeat the Manual Code Search and Entry Method from step 1. When the component turns off for the first time, do not press the STOP key, which would store the code. Instead, with the unit now off, continue to press the ON•OFF key repeatedly until the unit turns back on. Once the unit turns back on, you have found another code that operates the component. Press the STOP key.

3. Test the functionality again by attempting to control a variety of the component's functions. If the code that has been stored controls the majority of the component's functions, programming is complete. If the code stored does not give maximum functionality, you will want to try another code.

4. Repeat the Manual Code Search and Entry Method from step 1. Each time a code turns the component on or off, you have found a code that operates the remote and needs to be tested for maximum functionality. Continue through the code lists, cycling through the codes you have already tried, until you find one that offers maximum functionality.

Nov 10, 2012 | RCA RCR350 Remote Control

1 Answer

I need help programing my rca universal remote to my vizio tv


Hello
I hereby send tou the general proceedings to synchronise a RCA remote to TVs:

[1] Manually turn on the component
you want the remote to control.

[2] Locate the enclosed Code Lists.

Find the list for the component you

wish to program. Find your

component's brand. You will see a

listing of four-digit codes for each

brand. If your brand isn't listed, use

one of the Code Search methods to
program the remote control.

[3] Press and hold the component key

(TV, VCR•DVD, SAT•CBL) you

wishto program. The illuminated

ON•OFF key turns on and

remains on. If you release the

component key at any time

during the Direct Code Entry

procedure, the illuminated

ON•OFF key blinks four times,
and the process is exited.

[4] While holding down the

component key, consult the Code

Lists for the four-digit code that

corresponds to your component's

brand and use the number keys

(0-9) on the keypad to enter it.

While you are pressing the

numbers, the illuminated
ON•OFF key turns off.

[5] After the fourth number is

entered, the illuminated ON•OFF

key turns on. At this time, release

the component key. If the

illuminated ON•OFF key turns

off, you have entered a valid code

and have followed the correct
procedure for Direct Code Entry

If you enter a code number that is not

in the Code Lists or you do not follow

all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks

four times when the component key

is released. This is an indication that

a programming error has occurred.

In that case, repeat the Direct Code
Entry process from step 3.
These are the proceedings with RCA RCR-311 remote control. Most of the RCA remotes will have this process itelsf. OK.

Oct 10, 2011 | RCA Televison & Video

1 Answer

How do I program it, have codes but how do I put them in


Hello

To program your universal remote to control your components
using the Direct Code Entry Method, follow the steps below.

1* Manually turn on the component

you want the remote to control.

2* Locate the enclosed Code Lists.

Find the list for the component you

wish to program. Find your

component's brand. You will see a

listing of four-digit codes for each

brand. If your brand isn't listed, use

one of the Code Search methods to

program the remote control. (Refer

to pages 7 and 9 for Manual and

Auto Code Search methods.)

3* Press and hold the component key

(TV, VCR•DVD, SAT•CBL) you

wishto program. The illuminated

ON•OFF key turns on and

remains on. If you release the

component key at any time

during the Direct Code Entry

procedure, the illuminated

ON•OFF key blinks four times,

and the process is exited.

4* While holding down the

component key, consult the Code

Lists for the four-digit code that

corresponds to your component's

brand and use the number keys

(0-9) on the keypad to enter it.

While you are pressing the

numbers, the illuminated
ON•OFF key turns off

5* After the fourth number is

entered, the illuminated ON•OFF

key turns on. At this time, release

the component key. If the

illuminated ON•OFF key turns

off, you have entered a valid code

and have followed the correct

procedure for Direct Code Entry.

If you enter a code number that is not

in the Code Lists or you do not follow

all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks

four times when the component key

is released. This is an indication that

a programming error has occurred.

In that case, repeat the Direct Code
Entry process from step 3.
OK.

Jul 14, 2011 | RCA RCR312W Remote Control

1 Answer

Have rcu310bb remote. Need how to use with rc5220p dvd player


Hi
RCA codes to check with RCA RC5220P are:
3150, 3356, 3363, 3372, 3412, 3423, 3424, 3426, 3443, 3470, 3480, HTIB: 3444, Portable: 3163

1* Manually turn on the component

you want the remote to control.

2* Locate the enclosed Code Lists.

Find the list for the component you

wish to program. Find your

component's brand. You will see a

listing of four-digit codes for each

brand. If your brand isn't listed, use

one of the Code Search methods to

program the remote control. (Refer

to pages 7 and 9 for Manual and

Auto Code Search methods.)

3* Press and hold the component key

(TV, VCR•DVD, SAT•CBL) you

wishto program. The illuminated

ON•OFF key turns on and

remains on. If you release the

component key at any time

during the Direct Code Entry

procedure, the illuminated

ON•OFF key blinks four times,

and the process is exited.

4* While holding down the

component key, consult the Code

Lists for the four-digit code that

corresponds to your component's

brand and use the number keys

(0-9) on the keypad to enter it.

While you are pressing the

numbers, the illuminated

ON•OFF key turns off.

5* After the fourth number is

entered, the illuminated ON•OFF

key turns on. At this time, release

the component key. If the

illuminated ON•OFF key turns

off, you have entered a valid code

and have followed the correct
procedure for Direct Code Entry.

If you enter a code number that is not

in the Code Lists or you do not follow

all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks

four times when the component key

is released. This is an indication that

a programming error has occurred.

In that case, repeat the Direct Code
Entry process from step 3.
OK.

Jul 10, 2011 | RCA RC5220P DVD Player

1 Answer

I need instructions on how to set my RCR312W for a Samsung TV, just the TV


Hello
There are four digit and five digit codes that can be synchronised with Samsung TV to RCR312W.
Four digit codes are:
1004, 1005, 1006, 1012, 1013, 1015, 1017, 1019
Five digit codes are:
10812, 10054, 10060, 10702, 10178
Instructions:-

Direct Code Entry

To program your universal remote to control your components

using the Direct Code Entry Method, follow the steps below.

1. Manually turn on the component you want the remote to
control

2. Locate the enclosed Code Lists. Find the list for the

component you wish to program. Find your component's

brand. You will see a listing of four-digit codes for each
brand.

3. Press and hold the component key (TV,

VCR•DVD, SAT•CBL) you wish to

program. The illuminated ON•OFF key

turns on and remains on. If you release

the component key at any time during the Direct Code

Entry procedure, the illuminated ON•OFF key blinks four
times, and the process is exited

4. While holding down the component key, consult the

Code Lists for the four-digit code that corresponds to your

component's brand and use the number keys (0-9) on the

keypad to enter it. While you are pressing the numbers, the

illuminated ON•OFF key turns off.

5. After the fourth number is entered, the illuminated ON•OFF

key turns on. At this time, release the component key. If the

illuminated ON•OFF key turns off, you have entered a valid

code and have followed the correct procedure for Direct

Code Entry.

If you enter a code number that is not in the Code Lists or

you do not follow all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks four times when the

component key is released. This is an indication that a

programming error has occurred. In that case, repeat the
Direct Code Entry process from step 3.

Jun 01, 2011 | RCA RCR312W Remote Control

1 Answer

How do you program remote rca312w step by step.


1. Manually turn on the component you want the remote to control.
2. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you
wishto program. The illuminated ON•OFF key turns on and remains on. If you release the component key at any time during the Direct Code Entry procedure, the illuminated ON•OFF key blinks four times,
and the process is exited.
3. While holding down the component key, consult the Code Lists for the four-digit code that corresponds to your component's brand and use the number keys (0-9) on the keypad to enter it.
While you are pressing the numbers, the illuminated ON•OFF key turns off.
4. After the fourth number is entered, the illuminated ON•OFF key turns on. At this time, release the component key. If the illuminated ON•OFF key turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry.

If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry,the illuminated ON•OFF key blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 2.

May 28, 2011 | RCA Televison & Video

2 Answers

Request specific code or codes to program the RCA Universal Remote RCRN03BR to operate JVC DVD/VCR type HR-XVC33U. The codes provided in the remotes instructions provide only partial functionality on the...


Found some quick solutions including the manual for you

first here is the link for hte code list and manual http://www.rcaaudiovideo.com/remotes/2-3-devices/?sku=RCRN03BR
which i got from various sites after researching your problem for about 30 minutes please let me know if this works i hope i helped i tried really hard

if that doesnt work try these methods PLEASE LET ME KNOW IF I HELPED

for this first method you need the direct code which is 04
  1. Manually turn on the component you want the remote to control.
  2. Locate the Brand Codes in the Code Lists.
  3. Press and hold the component key you wish to program. The illuminated ON·OFF key turns on and remains on.
  4. While holding the component key down, press and hold the ON·OFF key. The illuminated ON·OFF key turns off.
  5. After holding both keys down for three seconds, the illuminated ON·OFF key turns back on.
  6. Release both keys. The illuminated ON·OFF key remains on.
  7. Refer to the Brand Codes. Press and release the appropriate brand code key (Numbers 0-9), using the number keys. The illuminated ON·OFF key blinks once.
    • Note: If you do not press a valid Brand Code Search key, the illuminated ON·OFF key blinks four times and turns off. The last programmed code under that component key is retained.
  8. Press and release the ON·OFF key repeatedly until your component turns off. Each time you press the ON·OFF key, the illuminated ON·OFF key blinks, and the next code is sent. The Brand Code Search begins with the first code in the chosen brand list for that component and cycles through all the codes for that brand. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON·OFF key blinks four times and turns off, all codes in the chosen brand list have been searched and another programming method should be tried. The Brand Code Search mode is exited.)
  9. Once you have found the correct code, save that code by pressing and releasing the STOP key. The illuminated ON·OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored!
  10. To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component's functions with the remote. If some of the features of your component do not work, program the remote with a different programming method.
if not try this for auto code search
moz-screenshot.png
STEP :
  1. Manually turn on the component you want the remote to control.
  2. Press and hold the component key you wish to program. The illuminated ON·OFF key turns on and remains on.
  3. While holding the component key down, press and hold the ON·OFF key. The illuminated ON·OFF key turns off.
  4. After holding down both keys for three seconds, the illuminated ON·OFF key turns back on.
  5. Release both keys. The illuminated ON·OFF key remains on.
  6. Note: If you press an invalid key during Auto Code Search, the illuminated ON·OFF key blinks four times and turns off. The last programmed code under that component key is retained.
  7. Press and release the PLAY key, then wait five seconds to see if your component turns off. If your component does not respond, continue to press the PLAY key every five seconds until your component turns off. Each time you press the PLAY key, the illuminated ON·OFF key blinks ten times and a block
    of 10 codes is sent to your component. This process continues until all of the codes in the Code Lists have been searched. (If your component has not turned off after all codes have been searched, the illuminated ON·OFF key blinks four times and turns off. The Auto Code Search Entry method is exited.)
  8. When your component turns off, you know the correct code is in the last block of 10 codes sent. Press and release the REVERSE key. Wait two seconds to see if your component turns on again. If your component does not respond, continue to press the REVERSE key every two seconds until your component turns on again. This will isolate the correct code in the last block of codes sent. Each time the REVERSE key is pressed, the illuminated ON·OFF key blinks.
    • Note: If you accidentally press the REVERSE key after your component responds, press and release the FORWARD key. Then, wait two seconds to see if your component turns off again.
  9. Once your component turns on, you have found the correct code. Save the new code by pressing and releasing the STOP key. The illuminated ON·OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored!
  10. When you press the STOP key, the code is stored.

Mar 16, 2011 | RCA RCRN03BR Remote Control

1 Answer

I lost the code book to the remote>can you send


Try the following procedure:

Code Retrieval on the RCA RCR312WR 3 Component Remote Control

1.Press and hold the component key (TV, VCR•DVD, SAT•CBL) whose code you wish to retrieve. The illuminated ON•OFF key turns on.
2.While holding the component key down, press and hold the INFO key. The illuminated ON•OFF key turns off.
3.After holding down both keys for three seconds, the illuminated ON•OFF key turns back on.
4.Release both keys. The illuminated ON•OFF key remains on.
5.Point the remote directly at the component for which you want to find the codes. Then, starting with the number 1 key, press and release each number key on the keypad in the following order (1-9, then 0). The number that causes the illuminated ON•OFF key to blink is the first number of the code. As you find each number of the code, write them down for future reference.
Note: All TV codes begin with the number 1; all VCR codes begin with the number 2; all DVDs, the number 3; and all satellite receivers and cable boxes, the number 5.
6.Repeat step 5 until you have retrieved all four numbers in the code.
7.After the fourth number is retrieved, the illuminated ON•OFF key blinks briefly, then turns off.
8.To exit the Code Retrieval Mode, press and release the GO BACK key at any time.
9.If you press an invalid key during the Code Retrieval process, the remote will not respond. If you do not press a valid Code Retrieval key (TV, VCR•DVD, SAT•CBL, INFO, GO BACK), Code Retrieval times out after 15 seconds. The illuminated ON•OFF key blinks four times, and then turns off.

Hope this helps.

Feb 24, 2011 | RCA RCR312W Remote Control

1 Answer

I need the codes for my jensen JER 422 remote


For a manual code search and entry:

1. Turn on the component
2. Press and hold the component key (TV, DVD, VCR-AUX, SAT-CBL)
The illuminated on-off key turns on and stays on
3. While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
4. After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
5. Release both keys. The illuminated ON-OFF key remains on
6. Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks, and the next code in the list is sent. This process continues until all of the codes in the code lists have been searched. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON-OFF key blinks four times and turns off, all codes have been search. The manual code search method is exited.)
7. Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be saved.
8. To confirm that the component is programmed with the correct code for max functionality, test the component. Attempt to control a variety of the component's functions with the remote. If some of the features of your component do not work try programming the remote with a different programming method. Be sure to retrieve the code your remote programmed.

Try this too:
In step 6, instead of pressing the on/off button, press the Play button. The on/off button will blink several times as a chunk of codes are sent at a time. If your component turns off, press the Reverse button (slowly) until your component turns back on, then press Stop to save the code.

Basically this does the same thing, but it goes through the codes...ten at a time, I believe. The only time you're going through them one at a time is when you are pressing the reverse key.

Dec 16, 2009 | Jensen JER-422 Universal Remote Control

1 Answer

I can't find a code.


need the code for a philips

Jan 06, 2008 | RCA RCR311B Remote Control

Not finding what you are looking for?
RCA RCR450 Remote Control Logo

1,664 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75774 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...