Doesn't spin or agitate - GE WBSR3140DW Top Load Washer

Your agitator pindle. has come loose From the spline. Try to lift up on the agitator. If it lifts off the spindle easily then it has worn out the spline. That is what connects the agitator to the s

probably you've got something blocking the water pump from doing its job properly so check that the water pump is free running emptying all the water if not then there is a blockage in the pump normally ist a button, paper clip or other debris out of a trouser pocket eric

if it doesn't agitate but will spin it is probably the agitator cams.

http://www.repairclinic.com/PartDetail/Agitator-Repair-Kit/285809/470910

If it doesn't spin it is probably the motor drive coupling

Here is a link to the part and a video on how to replace it.
I would suggest watchine the Video before you order the part then you can check if this is the problem.

http://www.repairclinic.com/PartDetail/Motor-Coupling/285753A/1195967

If it doesn't agitate but will spin it is probably the agitator cams.

http://www.repairclinic.com/PartDetail/Agitator-Repair-Kit/285809/470910

If it doesn't spin it is probably the motor drive coupling

Here is a link to the part and a video on how to replace it.
I would suggest watchine the Video before you order the part then you can check if this is the problem.

http://www.repairclinic.com/PartDetail/Motor-Coupling/285753A/1195967

see the next steps and use the common sense: God bless you
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

check the power (AC) input!

Google the model number. I had the same problem, Googled it, and found the actual turial on YouTube to fix it.

Does your washer spin? If yes, and it doesn't drain it most likely a failed/plugged pump.

If it doesn't spin it could be a belt or timer issue..

Hello there and welcome to fixya
there are several things that you will need to check first ok please verrify the following
It doesn't pump or spin
If it doesn't pump water out or spin, check to see if the motor is running, then proceed as follows:
If the motor is running, your washer probably has a frozen pump pulley or a broken pump belt. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. If it doesn't turn freely--if it's frozen or stiff--replace it. If the pump belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt.
If the motor isn't running, the lid switch may be defective. If so, the washing machine can't spin and may not function at all. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.
It pumps, but doesn't spin
If your washer pumps out the water but doesn't spin, check these:
The lid switch may be defective. If it is, the washing machine doesn't spin. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.