Question about JVC GR-D90U Camcorder

Open Question

CAN'T GET TAPE OUT OF MY JVC CAMERA

WHEN TURNED ON THE SCREEN SAYS, UNIT IN SAFEGUARD MODE,THEN IT TELLS ME TO EJECT AND REINSERT TAPE. THE PROBLEM IS I CANT GET MY TAPE OUT ITS STUCK.IS THERE ANY WAY YOU CAN HELP ME FIX THIS PROBLEM?

Posted by on

  • vuthara Jan 01, 2009

    Yes , I have the same problem , Could not take the tape out. Please I need help.
    Thanks,
    Eddie.


×

6 Suggested Answers

magic seadog
  • 38 Answers

SOURCE: safegaurd mode

Unfortunately this is a repair issue. There are several failures that can occur, none of which will be resolved without service, that create this safeguard situation. Often the fpc cable which carries sensor information to the micro has been injured and that requires repair. Good luck, magic seadog

Posted on Aug 12, 2007

JDeRuvo
  • 48 Answers

SOURCE: JVC Camcorder Model # GR-D270U

On page 51 of your manual, it states that an error has occurred and recommends resetting it by removing your battery, waiting a few minutes to clear it, and then resuming. If that doesn't clear the issue, then it may need servicing.

J. DeRuvo
Digital Camcorder HQ

Posted on Dec 04, 2007

SOURCE: video camera error

your tape transport is bad

Posted on Feb 23, 2008

welcomejee
  • 10594 Answers

SOURCE: unit in safeguard mode

Please remove and reattach battery and hope this will resolve 03 error issue in your JVC camera.

Posted on Dec 06, 2008

  • 2 Answers

SOURCE: unit stuck in safeguard mode

I can't find e setup for sony
camcorder

Posted on Dec 30, 2008

caroldon
  • 17129 Answers

SOURCE: my JVC GR-D32 keeps saying

Use a hair dryer heater into the opening tray to warm up the inside. It is possible that the DEW SWITCH is triggered and so the system goes to safe mode so that it does not entange if moisture is present on the drum. If not there are errors on the servo section and can be a failure on the board.

Posted on Jul 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get a jvc camcorder out of safeguard mode. Error 06


Step 1 Look at the camcorder's display to identify if it is in Safeguard Mode. If its display indicates an error number of E01 to E06, your camcorder is in Safeguard Mode.
Step 2 Disconnect your camcorder from its power source and remove its battery by sliding the latch forward and sliding the battery down while pulling it away from the camera's body. Wait at least two minutes before continuing.
Step 3 Remove the camera's cassette by pressing the "Eject" button, waiting for the cassette door to open, and lifting it out of the tape bay. This step is only necessary if the camera indicates the E03 or E04 error code or it tells you to eject and reinsert the tape.
Step 4 Replace the camera's battery, power connection and cassette, and turn the camera on.

Sep 04, 2015 | JVC Video Cameras

1 Answer

It keeps saying it in safeguard mode


my jvc camcorder kep.s saying unit is in safeguard mode eject and reinsert tape have done this a dozen time still show,s same thing on screen would appreciate help thank you larryd i

Feb 13, 2011 | JVC Video Cameras

2 Answers

MY CAMERA SHOW E03 ;unit in safeguard mode ;EJECT AND REINSERT TAPE WHT SHOULD I DO............


JVCGR-D270.Digital Camcorder. When we put the tape in the cam it chews the tape whiles loading and says that it's in 03 safe guard mode. Please help.

Jan 24, 2011 | JVC GR-D73AG Mini DV Digital Camcorder

1 Answer

Unit stuck in safeguard mode


I can't find e setup for sony
camcorder

Dec 30, 2008 | JVC GR-D270 Mini DV Digital Camcorder

1 Answer

Safegaurd mode


Unfortunately this is a repair issue. There are several failures that can occur, none of which will be resolved without service, that create this safeguard situation. Often the fpc cable which carries sensor information to the micro has been injured and that requires repair. Good luck, magic seadog

Aug 07, 2007 | JVC GR-D240 Mini DV Digital Camcorder

4 Answers

Unit in safeguard mode


You mix te info with Write protected tapes.
Safe guard mode is caused by the motor that takes the tape out of it's case, through the mechanics and past the video head.
If for some reason the electronics detect that it's been done by too much force, the safe guard issue promts.

Mar 29, 2007 | JVC GR-D290 Mini DV Digital Camcorder

Not finding what you are looking for?
JVC GR-D90U Camcorder Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Shekar Avadhani

Level 2 Expert

60 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...