Question about Samsung BlackJack

1 Answer

Profiles My phone mysteriously lost all the profile settings. So my phone won't ring or vibrate at all for calls, messages, or e-mail. I went to settings/profiles...and it comes up with a blank screen...instead of all the sound leveling options.

Posted by on

  • 2 more comments 
  • jnewberg Sep 09, 2008

    Blank Profiles screen as well.

  • stowski Sep 11, 2008

    I also have the same probelm. I lost the profiles screen and when I bring up the "power off screen" (press the power button once), it comes up with only a few options. I tried playing ringtones on it, but they sound very soft. Not sure what to do here, but I think I'm going to try the hard reset after I pull my data off.

  • scriper23 Sep 11, 2008

    No droppage/wetness on my end.



    I ended up having to hard boot-Reformat the phone. Everything is back to normal..but have to set everything back up again. Remember to pull the SIM card before you do it...wish I would have listened to that. Lol. Thanks everyone

  • jnewberg May 11, 2010

    No droppage, no wetness.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

Did you three drop it? or get it wet?

Posted on Sep 11, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change Ringtone Automatically when charging


The BlackBerry gives few profiles to choose from; e.g. Normal, Loud, Quiet, Vibrate.... my recommendation would be to configure each profile separately and just enable/disable the profile you like when you enter/exit your car...

The phone itself is not capable to switching the profile on its own once it is plugged in to your car charger...

Hope this was helpful...

Nov 10, 2009 | RIM BlackBerry Curve 8310 Smartphone

1 Answer

Ringer Not Working Properly


i would check your profiles. usually the default setting for the load profile is for it to vibrate twice and then ring, so that usually only gave you two rings to answer the phone after it vibrated twice. make sure that within your profile setting that you have it to ring with a tone, and make sure you have a volume selected. i would also use blackberry desktop manager and perform a back up or sync of your blackberry, and then perform a wipe handheld. the wipe hand held feature is in your options---security---general settings---and then press your options button (right of the trackball) and select wipe hand held. you will type the word blackberry and then it will wipe the handset. after it resets try the volume before you restore it, if you still don't have volume your speaker is bad.

Nov 05, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Well i have a blackberry pearl 8100 and i set it so that it rings and it does ring but it vibrates twice before that and i dont want it to do that. How do i make it just ring and not vibrate ?


Go to profile, select advance, you will get all the profiles highlight any one of the profile,then press Menu key, select Edit, then select Phone, you will get an option called Out of holster, press Menu key, select Change option under this select Tone, Now you're will only ring.

Nov 01, 2009 | RIM BlackBerry Pearl 8100

1 Answer

My bb curve wont ring/vibrate and the red light will not flash when I get a call/text message/voicemail.


You will need to firstly check the profile settings for notification of call/ text/ message/ voice mail.

On the home screen it is the speaker icon (profile) usually upper right corner

Choose the profile and scroll until you find the current profile - WIll be marked as active.

Scroll to the bottom of the menu for advanced
in the next menu - click on the bold active profile and opt for edit

Find the phone/ SMS/ MMS/ Messenger and any other actions that are not currently notifying...

Check the LED flashing option is set on all of these.

Oct 03, 2009 | RIM BlackBerry Pearl 8100

1 Answer

When I receive a call it rings only twice my end altho the caller hears about 10 rings. I often cannot get to the phone in time to answer and would like to increase the number of rings to 10.


Your profile may be set to a vibrate and tone setting. Therefore, you wouldnt hear the vibrating.

Go to Profiles then scroll to Advanced, select the profile that you are using. Scroll down and select Phone.

Where it says Out of the Holster, change the option to Tone and the Volume to Medium or High.


Aug 04, 2009 | RIM BlackBerry Curve 8310 Smartphone

1 Answer

Nokia E90 - no sound or mail symbol on incoming text message


Erase all incoming and outgoing text messages from the phone. Then take out the battery while the phone is on. This problem tends to happen when there are more than 2000 messages in the phone.

May 18, 2009 | Nokia E90 Smartphone

2 Answers

I want to turn off the e-mail received ring


Go to profiles, scroll to the bottom for advanced - opt for active profile you are using - Go to meesnger (alert) and messenger (new message)changing the ring tone or turning it off.

Mar 20, 2009 | RIM BlackBerry Curve 8310 Smartphone

1 Answer

Nokia e50 wont notify me when i recieve a new text message


Hello there! thanks for using Fixya.com!

Try the following instructions, to personalize your Nokia E50!
Profiles
Warning: In the offline profile you cannot make or receive any calls, or use other features that require network
coverage. Calls still may be possible to the official emergency number programmed into your device. To make calls,
you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.

Select Menu > Tools > Profiles.
You can adjust and customize the ringing tones, alert tones, and other device tones for different events, environments, or caller
groups.
To customize a profile, scroll to the desired profile in the list, and select Options > Personalise.
Define the following settings:
Ringing tone — Select a ringing tone from the list, or select Tone downloads to open a bookmark folder containing a list of
bookmarks for downloading tones using the browser. To listen to the selected tone, select Play. If you have two alternate
phone lines in use, you can specify a ringing tone for each line.
Say caller's name — Activate the text-to-speech ringing tone feature. When someone from your contacts list calls you, the
device sounds a ringing tone that is a combination of the spoken name of the contact and the selected ringing tone.
Ringing type — Select how you want the ringing tone to alert.
Ringing volume — Select the volume level of the ringing tone.
Message alert tone — Select a tone for received text messages.
Or you may still go to this website for more info! http://nds1.nokia.com/phones/files/guides/nokia_E50


Feb 15, 2009 | Nokia E50

2 Answers

Samsung Blackjack


Here's how to edit the ring settings for any function: 1. Start Menu 2. Settings 3. Profiles 4. Select the profile you want to change by scrolling down then Clicking Menu (right soft button) and Edit 5. Scroll down to Notification Type and choose Vibrate or None if you want to silence it

Sep 17, 2007 | Samsung Blackjack SGH-I607 Smartphone

Not finding what you are looking for?
Samsung BlackJack Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung PDAs Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Charlotte Byrams
Charlotte Byrams

Level 2 Expert

45 Answers

rongg

Level 2 Expert

94 Answers

Are you a Samsung PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...