Question about Hitachi 51F510 51" Rear Projection HDTV-Ready Television

2 Answers

51F510 Input settings for HDMI

All the devices I wish to hook up are HDMI. I would like to know how to set the inputs so I can use Input 1 Input 2 and so forth. Setting HDMI port on input 1. DVI on Input 2. I plan on using a HDMI 5X1 Switch as a selector for the input to the HDMI port. Putting the different HDMI devices on the HDMI Switch.

Thank you for answering so quickly .

Joe

Posted by on

  • jwengr2008 Sep 09, 2008

    I cannot find my users manual.

    Thank you for your help. I appreciate it very much.


    Joe


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Puedo conectar mi celular con HDIM

Posted on Nov 05, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 13,433 Answers

Okey,

Connect the hdmi, into the HDMI 1. that is automatically input one. Connect the 2nd device on Input 2, thats next to input 1 and hdmi, leave the input 1 empty, as the hdmi is connected to that.

3rd device into input 3
4th device into input 4.

Posted on Sep 08, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi rear projection tv, model WS-48311 - Lost audio after moving tv and re-hooking up cables. How do I get it back?


It sounds like this TV is being used only for the PS3. We'll need to troubleshoot this through a process of elimination.

If you're using Component Input 1 and audio, try using Component Input 2 and audio instead. If this set of inputs provides working audio and video - you can stop. Or, try going back to Input 1 once more. If Input 1 now works - you may have simply made a better connection. If it doesn't - then there's probably an issue with input 1 on the TV.

If moving to Input 2 above still didn't solve the problem, you should try using a different set of audio cables between the HDFury and the TV. If it now works, the original audio cables are faulty.

You can check the HDfury setup on another HDTV with component inputs with it connected to an HDMI cable. if the HDFury wors, you know the device and all the cables work. If you do this test and it works with your PS3, then you know that the PS3 is providing good video and audio signals via HDMI. If the problem follows the PS3 - then it's the PS3 at fault. If everything works perfectly on the second TV, then there is some issue with the audio amplifier / inputs / speakers of the Mitsu TV. You could get a cheapo stereo amp and speakers - or a set of computer speakers for audio - it all depends on how much you want to spend for sound.

Good lcuk!

May 07, 2015 | Mitsubishi Projection Televisions

3 Answers

Setting up HDMI / DVI port as a selectable Imput


may i know the model and maker of the device you want to use a HDMI cable

Sep 08, 2008 | Hitachi 51F510 51" Rear Projection...

1 Answer

How to connect to HDMI


newer tvs need to know that HDMI is attached to give you signal also need to turn on device from where HDMI signal comes from.post the model of your tv ,or if universal remote has input try this,1.- connect hdmi ,2.- turn on device(dvd,ps3,blue ray, etc.) 3.- press input on remote ,or go to menu manually on tv and find input.hope it works.

Dec 14, 2013 | Projection Televisions

1 Answer

My 61in rca scenium is saying unuseable signal and there is no sound or picture


For whichever input the monitor is currently set to (i.e. Input 1, HDMI 2, etc.) it is telling you that the signal it is receiving is unusable. The question first is the monitor set to the input you truly wish to use?

If it is, then check the cabling between the monitor and the source device (cable/satellite box, game box, etc.) If you believe it the source is working, try swapping the cable or using a different input.

If that fails, try hooking up the source to another monitor and seeing if it works there. If you have a long cable run, try higher quality cables, the video signal can degrade over long runs (> 25').

It sounds like the monitor is receive *a* signal, just not one with enough data to be useable. Probably a bad cable.

May 06, 2011 | RCA Projection Televisions

2 Answers

Our screen says video 1 with no picture


This is usually an easy fix. Depending how your tv is connected. Most probably it is the input you are on, or not on. Get your Sony remote look for a SOURCE or INPUT button. Press it and go to each input, for example, HDMI-1 2, INPUT-1,2 VID-1.2.etc.. Also check to see if your cables in the back is loose or out. Hope this helps

Aug 07, 2010 | Sony KP-51WS510 51" Rear Projection...

2 Answers

Hdmi cable connection


Your model has a DVI input which is at the top of component 1 section on the rear panel which is for HD input or you can use the RCA plug ins for HD inputs on the component 1 section as well. Either will allo HD to be hooked to your set.

Jan 04, 2010 | Hitachi 51S700 51" Rear Projection...

2 Answers

Cant find HDMI input on tv, trying to hook up ps3


hdmi output is" INPUT 1" on the menu ALSO hold down on the ps3 power button for 6 seconds and it should come on. the ps 3 has a thing were you have to set it to send out in hdmi or comp.

Mar 12, 2009 | Hitachi 51F59 51" HDTV Projection...

1 Answer

Hdmi input on pioneer pdp-r04u doesn't work. The component cables work, but not the HDMI. The digital audio works.


the r04u comes factory with hdmi DISABLED, hook up your hdmi device, and turn r04u to the hdmi  input (input 1 or input 3)  then:
To activate the HDMI terminal: 
1 Press HOME MENU. 
2 Press /  to select “Option”, and then press 
ENTER. 
3 Press /  to select “HDMI Input”, and then press 
ENTER. 
4 Press /  to select “Setting”, and then press 
ENTER. 
5 Press /  to select “Enable”, and then press 
ENTER.


there you go

Sep 04, 2008 | Projection Televisions

1 Answer

HDMI connection problem


On your TV set remote are you selecting the proper input; for example when you have different devices connected to the back of your tv set, dvd player, vcr, cable box etc; you have to tell the tv which device you want to use by selecting the right one on your tv remove input selection. Hope this was any help.

Sep 08, 2007 | Mitsubishi WD-52725 52". Rear Projection...

2 Answers

Blank screen on Digital In


Go into the service menu using the remote (hit the sleep timer, then video status and display at the same time), go into the status menu #2, then power off the tv. This will reset the HDMI port. If your sitll experiencing the issue, probably a dead board.

Nov 19, 2005 | JVC HD-52G786 52" Rear Projection HDTV

Not finding what you are looking for?
Hitachi 51F510 51" Rear Projection HDTV-Ready Television Logo

Related Topics:

1,971 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...