Question about SMC Barricade 7004

1 Answer

I am unable to access the router's web interface.

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 130 Answers
Re: I am unable to access the router's web interface.

* Check for restrictive Firewall settings. * Clear the cache of your web browser. * Try with a different web browser (e.g. Mozilla Firefox, Opera) * Try to access the router from a different computer.

Posted on Feb 19, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Where is the was button

I'm guessing you mean the WPS button - "Wireless Protected Setup" - As far as I can see from the User Guide this router doesn't have an actual WPS Button - You need to log onto its admin web interface and browse to the WPS setup page - Press the WPS button on your client device (laptop, printer, etc) then Click the WPS button in the router's web interface and let them talk to each other to establish a secure connection - The WPS light on the Front Panel should then light up when connected - You can find a user guide at the following url:

Jun 14, 2013 | Linksys WRT54G2 V1 Wireless-G BROADBAND...

1 Answer

I dont know wat is my username and password , then how can i change my network key

you might have to restore it to its facory settings

restore the factory default settings is to press in and hold the RESET button on the Wireless MAXg Router for between five and ten seconds.

You will lose all of your personal settings if you restore the factory default settings.

You might need to do this if you are unable to access the Web User Interface or have forgotten your password.

hope this helps

Oct 09, 2012 | U.S. Robotics USRobotics USR5451 Wireless...

1 Answer

Problem pulling ip address of hp printer up at web

Login to the web-interface in the router, and look at the "active DHCP connections" page. One IP-address should be the printer.

Aug 17, 2011 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

Unable to access configuration utility webpage for an airlink 101 431w accesspoint.

Use an Ethernet cable to connect from one of the LAN ports on the router to the network port on your computer.
Click Start
Click Run
Type CMD
Press Enter
Press Enter
Look for output like: Default Gateway ...
Start Internet Explorer
Press Enter
Use the ID/password for the router to login to the router's web-interface.
Click to access the configuration wizards.

Jun 23, 2011 | Airlink 101 AP431W 108Mbps 802.11g...

1 Answer

I have a Cisco router, series 1800, How can I block sites with this router, can you help me?

You need to create an Access Control List (ACL )
Fist of all you need to get the router to carry out DNS lookup so in config you need to add
Router(config)# ip name-server
Router(config)# access-list 101 deny tcp any host eq www Translating ""...domain server ( [OK] Router(config)# access-list 101 permit tcp any any eq www ! to allow all other web trafficRouter
Hope this helps

Dec 10, 2010 | Cisco 1800/2800/3800 Series - 802.11b/g...

1 Answer

Hi iam unable to login into the web interface can i knw the login id and password for it bcoz i forgot it nw finding it hard to reconfigure it plzzz help me!!!!!!!!

Hi Vivek,
I got your issue , if you have forgot the login id and password for ur router , its not possible to find the login id and password, instead you can reset ur router by finding the reset button on the router .u can just hold the reset button for 10 to 20 sec it will work.
Thanks & regards,

Sep 30, 2010 | Proxim ORiNOCO BG-2000 (700003212) 802.11b

1 Answer

I want to conect my iphone to my router but i dont have the password

If you are not administration the router than you have to ask your network admin for the password. Else open your browser and type in the add bar and hit enter. System will ask you to type in the user name and password to access the web interface. So username and password are "admin" by default. Once you have entered the username and the password, you will see the web interface. Select "Wireless" option and then selece "Wireless Security" and then you will see the password.

Aug 25, 2010 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

Netgear WG602 wireless router,

Hi, Assuming that the WG602 is fully operational, when you did a hard reset, the router reverted to its original factory setting as you posted. The default pre-configuration: act as a DHCP client; if the WG602 does not find a DHCP server on the Ethernet LAN, it defaults to this IP configuration: DHCP Client - Enable IP Address ? IP Subnet Mask ? Gateway ? Your PC need to be connected via a LAN cable to one of the Ethernet ports of the AP/Router to be able to configure it again to your desired network settings. Further it is necessary likewise to manually configure the connected PC's networking configuration to match the router. Manually configure your PC's IP Address to, Subnet Mask ?, Gateway - You can now try configuring the router through its web interface ( This is better explained in the user's manual available at the Netgear site ( Hope this be of some help/idea. Post back should you need additional information. Good luck and kind regards.

Oct 03, 2007 | NetGear WG602 802.11g/b Wireless Access...

Not finding what you are looking for?
SMC Barricade 7004 Logo

Related Topics:

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top SMC Wireless Access Points Experts

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 3 Expert

1061 Answers

Burim Hoxha

Level 3 Expert

468 Answers

Are you a SMC Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides