Question about Office Equipment & Supplies

1 Answer

Old copier - SHARP SF2014

I was wondering if anyone could hook me up with a "cleaning" procedure for my old copier (Sharp SF2014). I bought this machine years ago at an auction, it did not have a manual. Our local copy service shop has been taking care of me for the past few years, but now they say the machine is too old to keep under contrat.. so I was wondering if there are instruction for cleaning. the machine still works good... so if I can keep it clean I might get another year or so out of it.

thanks

Posted by on

  • jesseejane Sep 23, 2008

    Wow... thanks for the help! I didn't expect to get an answer, boy was I wrong. I sent a request to sharp this morning. Hoping they can help me. Thanks again.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,794 Answers

If you need to get any literature from Sharp on an SF series copier

You will have to click on this link to request it from Sharp

PDFs are not available for download on this particular product line.

Posted on Sep 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset Total counter on sharp AR-5618/5620 copier


Please give me code to increase the brightness of Sharp AR5618.

Jul 26, 2012 | Office Equipment & Supplies

1 Answer

Sharp mini components system -- remote speaker hook up


if there are no additional speaker jacks on the back of the receiver, then no; at least, not easily. 

What ohm are the speakers?

Dec 27, 2009 | Sharp Multi-System Mini Component System...

2 Answers

Lost key operator code for Sharp Copier AR-M207.


The default is 00000

Simulation 22 - 07 will display the Key operator code.

Perform the following procedure to enter the simulation mode.
"#" key -> “*“ (star) key -> "C" key -> “*“ (star) key (do this in quick sequence order, the display should change, then enter below)

Main code {22} ->
(Green Copy Button) Start key ->
Sub code {07} ->
(Green Copy Button)Start key

Press the "CA" button to go back to Copy mode.

Jan 24, 2009 | Sharp AR-M237 Copier

1 Answer

I can't change the printer IP Sharp AR-BC320


If you know the IP address, connect the printer with a laptop using a cross cable. Go to the printer web page by typing the IP address of the machine in the Internet explorer. Browse the menu under network setting and save after you change the gateway

Dec 19, 2008 | Sharp AR-BC320 All-In-One Led Printer

1 Answer

SHARP SF2014


Try using heavier paper say 80gsm. Or adjust light exposure if possible.

Oct 29, 2008 | Sharp SF 2020 Copier

1 Answer

Sharp AL-1642CS making blank copies


You have a door on the right side of the machine. in that door is a thin piece of wire mounted inside a bracket. The bracket is white and is at an angle in the door. Do you see that now?

Jul 17, 2008 | Sharp AL-1641CS Laser Digital Copier

1 Answer

Oliveti copier d-copia16W


if i can agree with ur friend that machine might be similar to sf 5316 so you mentioned a code that appeared on display. the question is if that code is F2 and if the old toner cartridge is exactly simslar to the new one you got from sharp, then the solution i tell you is to replace the plug in pin located at the rear side of the cart. above right the set of gears tied with two screws by the same part from the old previous cartridge. then re install the cartrige and switch ON

Apr 22, 2008 | Office Equipment & Supplies

2 Answers

Sharp AR160 - need reboot systems disk for fiery computer


PLEAZ OPEN THE SHARP COPIERS WEB SIDE AND SEE THE NUMBER OF YOUR ARIA

Sep 14, 2007 | Sharp AR-160 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...