Question about Niko OTP-2613W 26 in. LCD Television

Open Question

I need a universal remote code for Niko OTP-2613W .NIKO 26 lcd tv

Posted by on

  • 3 more comments 
  • myerst Sep 13, 2008

    I have the same issue I want to use my DVR remote to operate my Niko TV

  • myerst Sep 13, 2008

    I Have the same issue, I have a motorola DVR remote but it there is no Niko device codes  

  • Anonymous Dec 14, 2008

    Same problem here too!

  • jaurej Jan 13, 2009

    I have the same problem

  • WOLFP3 Feb 25, 2009

    my control is broken and see that many people had this problem with a universal control . there is no code for the niko tv any one was an answer or a code o how to solvve this is you have please e-mail me to wolfp3@yahoo.com

×

2 Suggested Answers

DRebel
  • 19 Answers

SOURCE: NEEDED remote and manual for my Niko OTP-2011R 20 in

Wow, not much support from Niko.

Their website is:

http://www.viewtekcorp.com/ (currently does not load)

Contact Info:

Viewtek Corp.
20957 E. Currier RD, Unit# G
Walnut, CA 91789
Tel: 909-598-6608
Fax: 909-598-6008
E-mail: service@viewtekcorp.com

I would try the company for the replacements and would obviously suggest calling the company (8:30am-5:30pm Pacific Standard) Monday-Friday.

Posted on Apr 03, 2009

  • 1 Answer

SOURCE: Problem:Won't turn on and off with remote or manually.

Mostly likely, it is your power supply. Is it getting hot? Most of them have a thermal protection circuit which will shut them off when they get too hot. You can order a new one off Ebay for about $20 -$40 depending on what voltage and current you need.

http://stores.ebay.com/LCDPAYLESS


Make sure you order the correct plug size too for your TV.

Posted on Apr 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is this TV a digital capable television?


Hi and welcome to fixya

To answer your question;
If you`re asking if the tv can receive digital signal, then the answer is no.
This set has only analog NTSC capabilty and not ATSC digital

It is HD ready (not full HD,1080p)which means that is has a max resolution of 1080i
And it doesn`t have HDMI input but DVI-D which is digital but doesn`t carry the sound.

Hope this help
Cheers

Aug 26, 2010 | Niko OTP-2613W 26 in. LCD Television

1 Answer

Need screw size for 26" niko tv stand. to mount the tv to the stand


man i looked and couldnt find a size but here is a number to a company who might can tell u, its called peerless mounts 1-800-473-3753 good luck

May 26, 2009 | Niko OTP-2613W 26 in. LCD Television

1 Answer

Problem:Won't turn on and off with remote or manually.


Mostly likely, it is your power supply. Is it getting hot? Most of them have a thermal protection circuit which will shut them off when they get too hot. You can order a new one off Ebay for about $20 -$40 depending on what voltage and current you need.

http://stores.ebay.com/LCDPAYLESS


Make sure you order the correct plug size too for your TV.

Apr 11, 2009 | Niko OTP-2613W 26 in. LCD Television

1 Answer

I think my NIKO 26 inch LCD TV has the tuner gone bad. TV hangs everytime i turn it on, but when i take it out it works with other VGA input. where can i get a replacement tuner card for this TV?


I have pretty much the same problem. When I turnm on the set (Niko OPT-2613W) it is hit or miss whether it will work or no. Some times I get audio with no picture, sometimes the other way around. Sometimes I get sound and picture but no controls work (either the ones directly on the TV or the remote). When I turn the TV ON/OFF multiple times (switch next to the power cord) it generally reverts to working correctly until I turn it off when I'm done watching and then the process starts all over.

I consulted a TV repair shop and was advised that since it was an "off" brand they werent sure they could find the repair manual or parts. I don't want to toss it but it really isn't good the way it is. I haven't tried it as a computer monitor yet but I think it would be fine with VGA input. Unfortunately that's not what I bought it for.

Apr 03, 2009 | Niko OTP-2613W 26 in. LCD Television

1 Answer

NEEDED remote and manual for my Niko OTP-2011R 20 in


Wow, not much support from Niko.

Their website is:

http://www.viewtekcorp.com/ (currently does not load)

Contact Info:

Viewtek Corp.
20957 E. Currier RD, Unit# G
Walnut, CA 91789
Tel: 909-598-6608
Fax: 909-598-6008
E-mail: service@viewtekcorp.com

I would try the company for the replacements and would obviously suggest calling the company (8:30am-5:30pm Pacific Standard) Monday-Friday.

Apr 02, 2009 | Niko OTP-2011R 20 in. LCD EDTV

1 Answer

Where can I get a power cord for niko 26 inch?


95% of all LCD's use the standard PC or Monitor cord. Best Buy ect...

Feb 06, 2009 | Niko OTP-2613W 26 in. LCD Television

1 Answer

Connecting dvd


If you have a set of av cables you can connect one set of the wire to the output of the DVD player while the other line can connect to an input line in the back of your tv.

The av cables have three ends. One cable is yellow, one is red, and the remaining end is either black or white. The jacks in the back of your DVD and TV are color coded to match the wires.

Jul 27, 2008 | Niko OTP-2613W 26 in. LCD Television

1 Answer

Remote control codes


That is what I'm talking about, not even Niko knows of a code. That is why I had to buy a learning remote like the Sony RM-AX1400.

Apr 06, 2008 | Niko OTP-3211W 32 in. LCD Television

Not finding what you are looking for?
Niko OTP-2613W 26 in. LCD Television Logo

Related Topics:

884 people viewed this question

Ask a Question

Usually answered in minutes!

Top Niko Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68180 Answers

noel
noel

Level 3 Expert

2877 Answers

Billthetoolm

Level 1 Expert

35 Answers

Are you a Niko Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...