LCD Screen Problem

just install the driver then use the usb cable to connect the same.

No. CLC 1150 Do not Have Any internal Hard drive, So there is no question arises to clear it

642.6 pounds.  Of course it can go up or down depending on accessories.  Info is here:  http://www.interactivecopiers.com/CLC/clc%201120/1120%20single%20sheet%20brochure.pdf

Toner feed error, possibly clogged up in a feed tube, or in between hopper and developer.
Will most likely need a service technician to fix.

E0000-0132

the cause of error is the fixing heater/s is not functioning well .Try this press asterisk with the head then 2 and 8 simultaneously then same asterisk with head. The lcd display will change Pres the ff: COPIER>Function>Clear>Err > ok .to reset fixing error .Switch power off and on the machine.If the Error
return, you have to call the canon service agent to check your fixing/fusing unit and its components

regards

hi you must have sst or service suppor tool to upgrade the firmware of your clc

There are rollers that cling on to the paper and move it through the machine. When the rollers are worn down they do not grip the paper. For a short fix you can get something rough like sandpaper, brillo pad, etc, and gently scratch the rollers to give them some traction. This will temporarily solve your problem until you can get the rollers replaced.

your lcd screen is damage replace it

The copier itself doesnt have a hard drive. Since you are talking about Fiery I assume you mean the colorpass RIP attached to the copier. A CD with the software on it actually came with the RIP but it was probably swiped by the dealer. In any case it needs a SCSI CDROM in order to load it. But all is not lost. The hard drive actually keeps a backup of the software on the hard drive itself. Kinda like a system restore partition on some computers. When you switch it on hold down the top right button until the diagnostics pass. then press "restore backup". this will take quite some time. Once it is done you will have to go back into setup mode and re-enter all the network settings. Dont forget the default paper size.

http://www.canon.fr/ Go to this location and see if they have a posting for manuals in french. You also may be able to purchase through ebay UK. Canon's help number is 1800okcanon they might be able to assist you as well.