Question about Projection Televisions

1 Answer

Trying to hook-up analog converter....tv has built in VCR does this pose a problem

Posted by on

  • ferocious Sep 08, 2008

    Had it connected that way still does not work.....Iam trying to help my 84 year old neighbor !!!! It is driving me crazy.....I am getting only a solid blue screen....don't know why ???? It is a 2004 TV with a built in VCR....Please help....

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The converter box with go between your anttena and your tv using a coax cable, the cable should have come with the converter box.

The anttena should be plugged into the input on the converter box and the tv plugged into the output on the converter box.

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a model dvd-vr 357 samsung dvd-vcr player recorder to hook up to a 2002 hitachi, and i must have it hooked up wrong.the tv is a 52 inch large screen h.d. the dvd -vcr turns on and when play is...


You need to use the video and audio outs located in the rear of the samsung player, or if you want to use the rf connector(atenna in) on the tv you need to select analog channel 3 or 4 to get a picture through, you can down load an owners manual at wwwretrevo.com.

Feb 03, 2010 | Projection Televisions

1 Answer

How do I bypass the bad tuner on my Sony KV-32FS13 through my VCR - I have DISH Sat.


Hookup the the vcr to the AV jack then plug the antenna and other devices into the vcr and tune everything through this. The AV ports on a TV are independent of the internal analog/digital tuner.

May 08, 2009 | Projection Televisions

1 Answer

How do L set up the converter with a TV , a vcr and "Dish" satte


It sounds like you need a three way splitter.
You need to reverse the connections; the splitter has input and out. Hook exterior antenna, converter box, and satellite to the three side terminals (out). Hook the single sided terminal to VCR input. Connect the VCR out to the TV input. This configuration assumes that you will be using the VCR to record from all inputs. The TV has to be set to channel 3 to act as a monitor for your other devices.
Hope this solves your dilemma.

Feb 22, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

I want to hook a system


you will only be able to get digital surround( dolby digital ) from your dvd player( by the coax or optical digital connections ) , the rest will only be in virtual surround

from the dtv box plug the yellow video jack(RCA) into the vcr video input , then plug the audio jack or jacks into the audio input on the vcr. from the vcr hook the audio out to the audio in on the reciever( tv/vcr/sat... input ) , then also connect RF out from the VCR to RF in on the TV .
for the dvd player hook the "s-video out" to the "s-video in" on the tv , then the audio L and R on same s-video input , then send the audio out connection on tv to L and R input on reciever dvd L and R input , then you will need to connect the optical from the dvd player to the reciever or coax connections for the dolby digital on the reciever to work

Jan 17, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

I want to convert a DVD to a VCR tape.


Do you want copy dvd movie on VHS tape?
Use DVD/ VHS Combo Player like shown in below picture...

76c6d5c.jpg

Oct 27, 2008 | Projection Televisions

1 Answer

DTA800B1 how or should I say why can I not see channels on the VCR when the converter is hooked up to it and the tv works just fine but will not set the channels on the vcr


instead of putting the converter box on ch4 ,put it on ch3 same as the vcr . set the converter box channel for the channel to be recorded, program the vcr to channel 3 for the channel to be recored. set the time and date on the vcr progam.tv does not need to be on for the program to be recored but the converter box needs to be on.

Aug 21, 2008 | RCA Projection Televisions

1 Answer

How do i convert my dtv-5801 to the new free digital air waves


My information indicates that the DTV-5801 has a NTSC (analog TV) tuner built in bot not and ATSC (digital tuner). It does have HDTV inputs to which an external tuner can be connected. For Off-Air Digital TV, add an HDTV (ATSC High Definition tunner) and you are set to go. Do not buy the DTV converters, they have down converters built in and only deliver SD to the outputs.

May 26, 2008 | Runco DTV-5801 58 in. Rear Projection...

3 Answers

Digital to analog converter box to tv/vcr combo


You will need a splitter and an rf modulator to do timed recording of programs. The instructions are on the dtv answers website, option # 2, record and watch a different channel. The recording is for the analog stations 1-24. You cannot record the higher stations. The items I purchased were a 3 way splitter $7 at local hardware store, an rf modulator $25 at Radio Shack. The other option was to get a cable box for the tv and record off of that at $6.95 a month or a DVR for $8.99 per month, all from comcast. The price that I paid for the items I needed would be repaid in 3 months if I were to go the comcast route. The conversion is nothing more than a money making scheme for them.

Mar 21, 2008 | Projection Televisions

Not finding what you are looking for?

Open Questions:

Projection Televisions Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...