Question about Projection Televisions

1 Answer

Picture turns off but sound stays on my wharfedale lcd26hdmi

Posted by on

  • frank cannon Sep 08, 2008

    source of signal is sky box via scart cable, picture appears for about 2 mins then goes off but sound is unaffected.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Let me know first what is your source of the signal: from cable TV, from antenna or from video source like dvd and vtr or any deck? if from dvd or any video source are u using rf cable or av cable (two wires) one for audio and other for video if it is this wire try interchange audio to video.
next at what time you miss the picture during watching tv through antenna or cable or during using video sources?

please tell me to help u solve your problem.

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have an lcd2010a wharfedale colour tv since 2005. It is out of warranty. Problem. switch on tv obtain sound and picture for 1 to 2 hours or even less 45 min. Then suddenly no picture, but sound or nothing...


try removing and re-installing the lamp cover on the back.
its a known issue with whaferdale tv's during manufacture, the lamp cover is not seated properly causing the safety switch to not engage all the way, when the lamp cover heats up and expands, it fall away further from the switch tripping it, shutting the set down.
when you remove and re-install the lamp cover, after you take the single ***** out, tilt the cover out and forward from the top about 3/4 of the way out and then tilt it back into normal position and put the ***** back.

Mar 11, 2008 | Projection Televisions

1 Answer

Sound but no picture - won't stay on


you may check your lamp first. other than that i would say a faulty mains board.

Apr 16, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

Sony KF-60WE610 Screen and Sound On/Off


All symptoms in your TV shows that you need to replace its Lamp as it has been consumed its life hours and TV requires new lamp. Lamp can be obtained from Sony Website. Price is $200, Hope this info will help you to enjoy your Sony TV in coming days.

Aug 17, 2008 | Sony Grand WEGA KF60WE610 60" Rear...

2 Answers

Hitachi 60vf820 ultravision


Good Day, bgblueeyess;
Your somebody is wrong; replace the LAMP.
Good Luck, big IRISH.

Aug 04, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

WHARFEDALE LCD2610AF WHEN I TURN ON DIGITAL I HAVE PERFECT PICTURE &SOUND.AFTER 10 TO 30 MINUTES THE PICTURE FREEZES AND THEN SCREEN TURNS WHITE WITH AGREEN HORIZONTAL BAND LOWER HALF OF SCREEN.WHEN...


Hi.

If the picture & sound are ok in analogue mode then chances are you have problem with digital tuner.
This may be expensive to repair so I would advise connect external freeview box or sky etc to get digi channels using scart to connect to your TV.

Jul 16, 2008 | Projection Televisions

2 Answers

Black/Green Distortion - Picture Quality - Wharfedale


This is no solution but a point in a probable direction.

A tech guy told me ALL the LCDs they have seen in their repair shop have "swollen" capacitors, this is due to voltage instability. Lowering the internal voltage regulator and replacing the swollen capacitors (which eliminate noise) apparently restores the LCD to new working quality. Without actually "seeing" my problem the tech said that should repair it. I have not tried this yet but eventually will begin that way.

Mar 11, 2008 | Projection Televisions

1 Answer

I have got wharfedale lcd 42in and a wharfdale dvdr24hd how do you set up the hdmi cable to get clear picture i have tryed taking out the scart lead out and left the hdmi cable in but i only get a picture ...


Sounds like you either have a bad card or a bad HDMI cable. Scarts are not the most dependable when it come to HD imaging there is alot of converting going on espically if the TV isnt NTSC standard to begin.

Mar 06, 2008 | Projection Televisions

2 Answers

My TV pictures turns black afetr a few hours but I still can hear sound perfectly!!!


It sounds like your rptv lamp is going out. If this is an older DLP this is most likely the cause. You can get a replacement at www.laptopsforless.com part number BP96-00224J for $151. If the tv is still under warranty, I would have them do it, otherwise replace it yourself. If so here is a link to give you step by step instruction. Please give me a good rating. ;-)

Dec 18, 2007 | Samsung HLN567W 56" Rear Projection HDTV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...