Question about Televison & Video
We've had the Sony Trinitron kv35s66 for about 5 or 6 years; manufactured in 1999. Sometimes the picture goes out leaving the screen black, but there is sound. Usually, before going out, the screen picture starts having horizontal lines, the screen picture gets shorter and shorter (the width is fine), and then sometimes it goes to black. There is no red blinking light after it has been on for awhile. Sometimes it comes on just fine. Other times when we turn the tv on, the red light flashes over and over, the screen stays black but we have sound. We always have sound. Sometime the picture will just come on. It may be right away or sometimes it's 10 minutes or longer, or the picture won't come on at all. We have unplugged it from our APC battery backup/surge protector unit and plugged directly into an wall outlet. We have reset the power many times. We can't afford a new TV right now, so we are wondering if this is a quick fix, or will we need to toss this out. No picture, just sound and red blinking problem that goes out and a picture that might come on but with in a few seconds lines apear and the picture gets smaller then goes away but i still have good sound.
This should be a quick fix. Try resoldering the vertical IC. This is a small flat IC attached to a heat sink with about 11 pins. It should be marked LA7837 or something similar. That should resolve the problem.
Keep us posted.
Posted on Sep 08, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The most common problem (I have fixed lots) is the Vertical amplifier has developed a loose connection. It probably just needs resoldering. As things expand it makes and looses connection you picture goes in and out. The vertical chip is a large black chip that gets hot, over time it degrades the solder until a connection is damaged. Most newer sets have a protection circuit that senses the lack of height, and shuts down the picture tube to save it. When the picture dropped to a line on older TVs and left that way too long it would burn a line into the face of the picture tube. You then had to have the picture tube replaced along with the vertical amp. it's kinda like a screensaver for your TV.
Posted on Feb 02, 2008
Tips for a great answer:
Jun 23, 2010 | Sony KP-57WS520 57" Rear Projection...
May 31, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV
Jan 29, 2009 | Sony FD Trinitron WEGA KD-32FS130 32" TV
Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV
Nov 21, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Sep 28, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV
478 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: