Question about NetGear MR314 802.11b

1 Answer

Default pasword What is the MR314 router's default Web Management password?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 130 Answers
Re: Default pasword

The initial factory default Web Manager password is '1234' and the user name is ?admin?. Doc ID: N100515.asp

Posted on Feb 19, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Unable to login to WAP4410N using web based administration utility after factory reset. it's reporting as invalid username or password

Please see the Reset the Default Factory Setting please read it the Detail I have a WAP4410n wireless access point, I have reset it to factory default by pressing the reset button for 30 seconds. I am able to ping its default ip through its default ssid "ciscosb" if I configure my static ip was solved by connecting through the lan cable, and setting manually the ip to network, and accessing through web, the reason why the connecting through WiFi was working because the management web access through wireless is disabled by default

Apr 21, 2015 | Cisco Small Business WAP4410N WirelessN...

1 Answer

Setting up new password

  • I click the Windows 7 Start button and in the "Search programs and files" box, type "cmd" and click Enter. This pulls up the command line window.
  • At the prompt, I type ipconfig and click Enter. This is the result I get:

  • The IP address of the router is the Default Gateway address. So, in a browser, I type to get into the Trendnet router's management interface.

  • You'll also need the username and password to get into the management interface to configure the router. Again, this information is in the router's documentation, or can be had by performing a Google search. In general, most routers use Admin, as the user account and either admin, password, or no password (meaning just leave the field empty), as the password, but this can vary router to router.

Apr 04, 2014 | Wireless Access Points

1 Answer

Change WPS Default Settings

You will need to login to the router web page of

Jan 20, 2014 | Linksys WRT54G2 V1 Wireless-G BROADBAND...

1 Answer

In my house i have a laptop with wired internet, 1 wii with wireless, 1 wireless access point. now i'm trying to get internet on my phone using wireless. however i forgot the network password. how can...

Some wireless routers have a web management page hosted by the router where you can change the password. You can access this by typing in the router's IP into the address bar on an internet browser. To get the IP of the router, on your PC, go to Start -> Run -> type cmd -> then type ipconfig /all. This will give you information on the network adapters on your PC. Find the entry "Default Gateway", this is your Router's IP. The router will ask you to authenticate using an account you set up along with a password. If you do not have these either you can access the admin account with a default password if you haven't change the admin's password. Here is a list of those. If you can't find you router or this does not work, most routers have a button on there exterior that will perform a factory reset. Hold the button down for 5-30sec and it will reset the router back to when you first bought it.

May 08, 2011 | Wireless Access Points

1 Answer

Web Configuration Screen

You may have to remove proxy settings on your Internet browser. Or, remove the dial-up settings on your browser. The computer may not have received an IP address. Restart the computer or run the ?winipcfg? utility to dynamically assign the IP address (?ipconfig? for NT users), and then launch the browser.

Feb 19, 2006 | NetGear MR314 802.11b

1 Answer

How To Make a DMZ

A router normally stops incoming Internet traffic from getting on your network, unless the traffic is in response to one of your computers or when using port forwarding. But instead of discarding the incoming traffic or using port forwarding, you can send incoming traffic to one computer on your network by establishing a "Default DMZ Server". (DMZ = humorous reference to "Demilitarized Zone".) This avoids you having to figure out what ports an Internet application wants ? by throwing all ports open for that computer. For regular network operation, NETGEAR recommends you do not use a DMZ. A computer with DMZ loses firewall protection, and is exposed to exploits from the Internet. If compromised, your own computer can attack the rest your network. Instead of DMZ, use port forwarding, as described in How is Port Forwarding Configured? However, the DMZ server feature is helpful: * When you have a problem connecting to an Internet service. Setting up a DMZ will determine whether a closed port is responsible for the problem. * With some online games and videoconferencing applications that are incompatible with NAT. Follow the procedure under your router model to create a DMZ To Create a DMZ for RP614, MR814, FVS318, FVM318, WGR614 1. Open a Web browser, and type the router's IP address (The router's default IP address is Click Go. 2. Enter the username and password for the router (Default username is admin and password is password). 3. From the browser Main Menu select Advanced > Security. Some routers, such as the MR814, use the WAN Setup Options, page, instead. 4. Enter the server's IP address. 5. Click Apply. To Create a DMZ for FR114P, FR114W, FM114P, FR328S, FVL328 1. Open a Web browser, and type the router's IP address (The router's default IP address is Click Go. 2. Enter the router's username and password (Default username is admin and password is password). 3. From the browser Main Menu select Advanced > Security. 4. Click Rules. 5. Check the box for Default DMZ Server, and enter the server's IP address the corresponding box for the IP Address. 6. Click Apply. To Create a DMZ for RH340, RH348, RT328, RT338, RT311, RT314, RP114, RO318, MR314, DG814 * Going through the GUI and going to Port Forward in the left menu bar. * For RM356: Going through telnet and from the main menu go to menu #15. 1. Open a Web browser, and type the router's IP address (The router's default IP address is Click Go. 2. Enter the router's username and password (Default username admin, password 1234). 3. From the Main Menu of the browser interface, under Advanced, click Port Forwarding to view the port forwarding menu. 4. Enter the IP address of the DMZ server in the corresponding Server IP Address box. 5. Click Apply at the bottom of the menu.

Feb 19, 2006 | NetGear MR314 802.11b

1 Answer

Does the MR314 Wireless broadband router have an internal DHCP server?

Yes, ALL of NETGEAR routers come with a DHCP server, which is set to be active by default.

Feb 19, 2006 | NetGear MR314 802.11b

1 Answer

Port Forwarding

To Enable Port Forwarding for MR314 or RP114 1. Type the router's address in an Internet browser's address bar. (By default the router's address is 2. Enter the router's username and password. 3. Click Advanced > Ports on the left menu bar. 4. Enter the first port number in an unused Start Port box. 5. If only one port number is to be forwarded, enter the same number in End Port. To specify a range of ports, enter the last port to be forwarded in the End Port box. 6. Enter the IP address of your local server in the Server IP Address box. 7. Click Apply.

Feb 19, 2006 | NetGear MR314 802.11b

Not finding what you are looking for?
NetGear MR314 802.11b Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Wireless Access Points Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a NetGear Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides