Question about E-Machines eMachines Desktop PC

1 Answer

Detecting array it does not work because no 8 mb buffer in there. There are from 16 m to 128m. Also i could not go to VGA by put f8. Please advice. My E-machine model is T-3418

Posted by on

  • bethuy Sep 09, 2008

    I am sorry. I could not boot it. when i turn on pc it's appear the black screen with " Detecting array..." and stay on untill i am turn it off. Thank you

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,027 Answers

First depending on how much ram you have, set the video display in the BIOS Set Up setting to 128MB, this will use 128mb of your ram memory to use for video display.

next boot into windows and right click any where on the desktop in an empty space, go down to "properties" and left click go to the "Settings" tab...what is the screen resolution and color settings set at? Mine is 1024 X 726 32Bit true color

Posted on Sep 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting detecting array message


And what else? If the system just hangs at detecting it's expecting to find an array of hard drives attached to the system. Do you have an array that it can boot to? Does it load the OS finally? Was it working before? Did you make changes to the bios ro the array controller bios?

Nov 13, 2013 | Gateway GT4016 Desktop PC

1 Answer

Transcend 650 HDD not working Suddenly, blue light is on but not showing up Drive in mycomputer, disk management. I have gone thru so many solutions but every one says select your drive fix it or go t


Try removing the Actual drive from the caddy, As the caddies are the weak point in all external HDDs the control hardware is not very robust. This will also tell you if the Spinner (Hard drive Mechanical Unit) is working or not. You can then connect it using a dock or a cable to the motherboard.

Apr 13, 2013 | Transcend StoreJet TS640GSJ25M 640 GB...

1 Answer

I bought a new 1GB ram(DD2) when i insert it it nt work bt whenever i insert it with old 512MB ram then its work bt in bios setting only show the 1GB ram


Maybe 1GB is the maximum amount of memory that your system will hold. And maybe your system likes memory to be in pairs, so when you put the 1GB in by itself it didn't work, but when you put it in with a 512MB it works.

May 18, 2012 | Computers & Internet

2 Answers

In my gigabyte g41-combo mother board sound driver installed but sound is coming


i dont at all think that it is a problem. If windows 7 is not detecting your built-in via 1708s sound card then try installing the latest drivers from the gigabyte website or the via official website. If that doesn't work then try installing an add-on sound card that you can buy from anywhere.

Nov 30, 2010 | Gigabyte GA-G41M-Combo Motherboard

1 Answer

My motherboard Problems


First open cpu cabinet then pull RAM memory and pull cmos cell from motherbord for 10 minutes then when you press power button press F8 key then enter in enable vga mode .
Then go to dispaly property then change screen resolution to 1024*768 then apply and then check.

Aug 21, 2009 | ASUS P5VDC-MX Motherboard

1 Answer

Graphic Problem


This might be an issue with not having full rights within the BIOS, you could try to enter the BIOS and press F8 this sometimes reveals 'hidden' features.

Dec 20, 2008 | Intel Motherboard

1 Answer

Model #w3118


If you can get in setup after pressing F2 check on the advanced chip tab,video and make sure 8mb buffer is selected. save and exit.

F-2 is for setup utility
F-10 is for network boot.

if it stll won't boot up correctly press F8 when booting up and select vga support then maybe get in to the os that way and adjust video display settings after.

Apr 13, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...