Question about Car Audio Receivers

3 Answers

Harman Karden Harley Davidson radio

I have a 2007 HD electra glide classic with a Harman Kardon stereo, factory installed. I was caught in a downpour and since the radio will not play. When I turn on the ignition the radio comes on, but I am unable to shut it off or get any of the buttons on the radio to do anything. This bike is also equipped with controls at the handlebars to control the radio and these do not work either. I have checked the fuses and they are ok. Help, I'm stumped

Posted by on

  • 1 more comment 
  • Anonymous Sep 20, 2008

    i have a 06 streetglide with a harman karden radio everything works but sometimes the sound turns off and by turning the radio off and on the sound will come on but lately the sound stays off its hit and miss and if it does come on its only temporary.

  • Anonymous Sep 21, 2008

    the radio will lose the sound, if I turn it off and back on again it will work for a short period of time.

  • ht40 Jan 29, 2009

    Yup, I have a 2007 Street Glide, and the radio works fine for a while, and then there is no sound. The screen is still shows that the radio is on, but no sound. I hit the power button and it turns on again, works for maybe 10 minutes, then no sound all over again. The radio has not gotten wet. Please let me know if there is anything I can do to fix this problem.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

For this problem, the problem is in the audio power output. immediately replace the IC TDA 6563. for the installation done by an electronic expert.

Posted on Nov 10, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Contact Becker at 201-773-0976, official rework of this model Harley Head unit.

Posted on Apr 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds to me sorry to say but it is shorted out and a new radio might be the answer do you have one of those radio covers ? i have only seen the smoked ones it might be wise to look into that also

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 sunfire


The best advice for a quick solution is for you to look at your fuse box. It should indicate right there what fuse is for the radio. If not, look at all of the fuses and replace the one that is blown.

Aug 31, 2014 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Installed after market radio in my 2002 buick rendevous i get power to the radio but no sound


Why you buy a harness that is factory matched from Best Buy. Could be the speakers were power amped from the factory stereo and the after market is not powering them. Would call Best Buy to confirm it.

Jun 18, 2014 | Car Audio Receivers

1 Answer

Can I "PLEASE" get a wiring diaphragm?


Do you still have the factory harness hanging out of the dash?? Do you just need to know what the wires are on the stereo??? If your factory harness is still there go buy you a factory install kit for your make and model of car. if you need to know what wires are what on your radio let me know

Mar 07, 2012 | JVC KD-S26

1 Answer

Im trying to install one of radios into my 1996 honda accord but how?


In order to install A Radio first follow steps of Removing the Factory Radio

#1
Open the center console, and you'll see two phillips screws at the bottom. Unscrew both of them.

#2
Remove the drink tray, and unscrew three more phillips screws. The center console is now loose enough to move.

#3
Pull the center console back a few inches to expose two more screws under the plastic part of the gear shift. Remove these screws.

#4
Pull the ashtray out of the dash, and you'll see one more phillips screw. Remove this screw and pull off the plastic panel around the factory stereo.

#5
Locate the metal tray under the factory pocket (below the stereo), and pull it out of the dash. There will be two phillips screws holding it in place; remove those, and then pull the stereo out of the dash. You'll need to unplug the wiring harness that is plugged into the back of the radio.


Now Install The New Stereo

#1
Assemble the dash kit, as shown in the instructions. Put it into the dash where you just took the stereo out. There will be a rectangular opening, and a pocket underneath. The opening is where the radio will go.

#2
Secure the dash kit by screwing in the one screw in the ash tray, and the two in the opening of the panel.

#3
Insert the metal cage that came with the stereo into the opening above the pocket. Ensure that the fit is flush with the pocket. Using a screwdriver, bend the metal tabs upward, which holds the metal cage in place.

#4
Start wiring the stereo harness to the wiring harness. Match wires color by color until all of the wires are paired. For example, if you find a purple wire coming out of the aftermarket wiring harness, plug it into a purple wire from the factory harness. You aren't touching any of the wires in your dash on this step, you are simply wiring the new stereo to the wiring harness.

To connect these wires you'll want to place a piece of heat shrink over one of the wires, strip the ends, twist both ends together, and then pull the heat shrink over the exposed metal parts of the two wires. Heat the heat shrink with a lighter until it shrinks and forms a tight bond between the two wires. When done correctly, you won't be able to pull the wires apart.

#5
Plug the aftermarket harness into the factory plug, and insert the radio back into the dash. If you find wires that don't have a match, be sure to cap them so that the ends aren't exposed. Exposed wires are what cause shorts and electrical problems.

#6
Work in reverse order to put the dash back together. The radio won't be secure in the dash until the dash is put back together.

Hope this helps

Thanks

Oct 07, 2010 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

VRCD400 SDU I am trying to install this radio in a 2003 Saturn Vue that had a factory am/fm/6disc/cassette radio with the 'advanced' (power amp) audio system. The factory system was stolen. The factory...


I would suggest calling or find online Crutchfield. They have been car stereo experts for many years. They sell harnesses for just about any car allowing you to plug in your stereo directly to the existing harness. I guarantee they will know!

Mar 24, 2010 | Virtual Reality VRCD500-SDU CD Player

1 Answer

Dual xhd6425 Reception Problems


My XHD6425 seems to be very inconsistent... Sometimes I get okay reception, other times I get terrible reception (much worse than my original stock Ford radio). The reception problems are more noticeable on stations that are more than 30 miles away or so.
Perhaps oddest of all, I've sometimes had it bounce back and forth between two stations (like if you are driving and in the middle of nowhere, half way between two stations), even in areas where I know should be getting good reception on one station and had never heard of the other other station before.
If you've figured anything out, please let me know.

Jan 16, 2010 | Dual Electronics XHD6425 Car CD/ MP3...

1 Answer

The radio/cd player on my 01 yukon loses the sound randomly. Some times it works fine then othertimes it does it a lot. This all started a month ago. Before then I'd had no problems. I talked to a guy at a...


sounds like the amp is over heating and needs to be replaced
and yes there is most likely an amp in the system and it is eithor over powered or over heating

Jul 29, 2009 | Car Audio Receivers

1 Answer

Get no sound from rear speakers WITH ipod


I have exactly the same problem - don't work with CDs either, just radio. Just installed the deck yesterday. Help would be appreciated. Have been through the manual front-to-back.

Aug 09, 2008 | Kenwood 50W x 4 Apple iPod -Ready MOSFET...

1 Answer

Installing XM on my Motorcycle


Pick yourself up a Garmin Zumo 550, it has a navigator, MP3 player, photo viewer, and XM (Radio, Traffic, & Weather) and best of all the music gets interupted when it's time to give you directions.

May 03, 2008 | XM Radio (XMP6000)

2 Answers

Speaker Pop when i turn on or change tune on radio


the speaker is probably worn is it factory is the speaker wires crossed need more detail

Mar 09, 2008 | Sony CDX-GT710 CD Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...