Question about NetGear CG814M Wireless Cable Modem Gateway Router

1 Answer

Cannot Connect Gaming Console or Remote Computer to the Internet

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers
Re: Cannot Connect Gaming Console or Remote Computer to...

1. Make sure the gaming or remote computer has a correct IP address with the same IP subset address as the wireless router or access point. 2. Turn the bridge off. 3. Turn the bridge on. 4. Recheck the IP address for the gaming computer or remote computer. 5. Turn off all network devices. 6. Power on the wireless router or access point. 7. Wait 30 seconds. 8. Power on the bridge. 9. Check to ensure the bridge connects to the wireless router or access point. 10. Power on the gaming console or remote computer.

Posted on Feb 19, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Belkin Router, has been preventing me from playing online in games, such as TF2, Samp and on..

You can connect your gaming console wirelessly with your belkin router.Read more:How to connect gaming console.....

Aug 22, 2012 | Routers

1 Answer

When I connect my computer or gaming device to this router it does not work. When I connect my computer or gaming device to the modem directly they work fine. All the lights except the internet and the...


You will have to open some specific ports on the router. You will have to access the router's setup page and use the port forwarding or port triggering setting.

Apr 07, 2011 | Belkin F5D72344 Wireless G Router 54Mbps...

1 Answer

All of the internet cables are connect and my ethernet cable for my xbox is connect but there is a problem signing into xbox live

Gaming router setup steps:

1. Check for current anti-virus before doing step below.
2.Check firewall allowances or permission to be sure game is allowed
3. Try "port forwarding
4. Check the game / verify ports need for multiplayer gaming.
5. Please forward all ports UDP/ TCP To gaming computers IP address.\
6. Log in to router and place gaming computer in to DMZ.
7. When done gaming disable the game in the DMZ.

Jul 07, 2010 | D-Link DSL 604+ (DSL-604+) Wireless Router

1 Answer

What is it used for?

You can use this wireless router to connect different wireless devices together. Each device with a wireless network card (computer, phone, gaming system, printer, etc.) can connect to the router without a cable. This will form a network where information can be shared.
The main purpose people use this for is to connect their network to the internet. As long as the router is connected to your internet, every other wireless device can also connect.

May 24, 2010 | Cnet CWR-854 Router

1 Answer

No internet gaming on any platform works. All

If you are using a router by default special ports are disabled.... so you need to know the port number that those certain games are using so you can open or forward the ports on your router settings to allow you access to the games.

Mar 18, 2010 | NetGear DG834G Router

1 Answer

How do i change my NAT from strict to open?

1.Check the default gateway that you are getting on the computer.
2.Type in the same IP address on the address bar of your browser
3.This will open up the router interface page from the router(not from internet)
4.There will be an option named FIREWALL, disable it.
5.Enable DMZ for your gaming console on the router. Assign the same IP address on the console manually.
**This should mostly fix this issue, else...
6.Check if you have a NAT enabled modem, mostly all DSL providers have.
7. Ask the internet service provider to BRIDGE the modem
8. Now, configure your router for PPPoE.

This is sure to work! I can bet...

Jan 23, 2010 | Zyxel Prestige 600WH Wireless Router...

1 Answer

I have a 2wire 1000-100030-000 Ethernet (Non USB) gaming adapter and I do not have the installer cd nor the default IP address of the device. I have spent many hours trying to set it up, but I can't find...

Hi lcardent,

Since you have tried to find the ip address even using ip scanner without success, I guess there could be two possibilities.

1. The default ip address of most 2 wire routers is So, the default ip address of 2 wire gaming adapter must be 192.168.1.x, where x could be any number, which we need to figure out. (Tip: You could assign a static ip to your computer, say Hardwire your computer to gaming adapter. Reset the gaming adapter for about 30 secs. Then try to use ip scanner and check the ip address for the gaming adapter. This may help, if your gaming adapter is locked out due to firmware issues.

2. The second possibility I could think of is that the 2 wire gaming adapter might have been designed as a dhcp client only. If this is the case, you could hardwire your gaming adapter to your router. Then find the ip address of your gaming adapter from the dhcp client table (from the router's web interface).

Please feel free to provide your feedback, and I would be glad to offer further assistance.

Also, please rate the solution, if it helps.

Thank you.

Jan 02, 2010 | 2wire (1000-400108-001) Router

1 Answer

I need to open my Nat for Xbox live. Please Help!

Configuring Your Dell™ TrueMobile™ 2300 Router for Gaming

Follow below steps to set up the router for gaming:
  1. Select the system or systems to be used as game systems.
  2. Locate the MAC address. For Windows 2000 and XP
    1. Click Start -> Run.
    2. Type cmd, and click OK.
    3. On the command prompt, type ipconfig /all
    4. Write down the MAC (Physical) address of your computer to configure for gaming.
  3. Open the web browser, and type http://my.router (or
  4. Click the Advanced Settings tab.
  5. Click the DHCP Server Settings tab on the left navigation bar.
  6. Click Add button in IP Address Reservation,
    1. Enter the MAC address of the system you wish to use for gaming in MAC Address field.
    2. Enter an IP address for the system (select a number between 101 and 254)
  7. Click Submit.
  8. Click the Port Forwarding Settings tab on the left navigation bar.
    1. To set a single computer for gaming, check the Enable DMZ Host box.
    2. Enter the IP address of the system at DMZ IP Address field.
    3. Click Submit.
      note.gif NOTE: Only a single computer can be set for DMZ service. To set multiple computers for gaming, please post your query again
  9. Reboot the client system. The client system will use the newly assigned IP and will not have any TCP/IP ports blocked by the firewall feature of the router.

May 18, 2009 | Dell TrueMobile 2300 Router (000001)

1 Answer

Router will not connect with on demand direct tv

I had the same problem. I fixed everthing by updating the router's driver. Try that and see if it works.

Mar 01, 2009 | Linksys WRT160N Wireless Router

Not finding what you are looking for?
NetGear CG814M Wireless Cable Modem Gateway Router Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts


Level 1 Expert

31 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 1 Expert

36 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides