My name is Jose, i have a problem with my TV, the TV wont go on and there is a blue light on the botton where i turn it on and off well that blue light is blinking, i alredy unpluged the Tv for 15 min but nothing happend and i don't know waht else to do.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello more than likely the lamp has gone bad. On that set you have to remove the back cover to check the lamp to see if it has broken. the picture gives you an idea and some instructions on how to change it. tks
Turn the TV on From main supply: Ensure that the main supply is turned on. A blue indicator light on the front of the TV lights up. When the TV is turned on by the main supply, the blue indicator light will blink for 45 seconds. This is the lamp's start-up period. When the light goes off, press the POWER button on the remote control or power switch. Press POWER to turn on the TV.
hello my name is rico i work on tvs sometimes, your problem with tv is bad convergance, that mean ics in your tv blew out, thats why your colors wont aling. if you need more help fixing your tv let know feel free to call me at anytime, i live i mesa az my phone number is 602-810-7149
If it's a big tv it can just take a little while to power up, I've found that pushing channel up button switches on tv quicker but I've no idea why.
Unless you want to save power you should only be switching tv to standby, there will still be a light on the tv somewhere, blue or red it varies. TV's turn on much faster from standby than completely off.
I also have this model. A few months ago, when I turned on the tv, it told me my lamp was in need of replacement. just yesterday, my tv did the same as you....the blue light flashed and then the lamp light kept flickering. All I can say is your lamp needs to be replaced.
press and hold the tv botton on you dish remote till all the lights light up release the tv botton it should stay flashing then hit the larger of the two red power bottons next you will need to hit the up arrow one at a time till the tv shuts off when the tv shuts off you then hit the # botton at the bottom you wiil see the tv botton flash your code will then be saved
Good Day Joseamunoz2;
It sounds like the convergence circuit has failed, but it does not normally cause the TV not to turn on. Until you get a signal (cable) back on, double check your concerns.
Good Luck, big IRISH.
Open up the front and check for fluid under the CRT circuit boards. The
one on the right (as you face your TV) is the blue one. For some
reason, the diaphram for the glycerin in the blue optic is on the back
side and leans down. It tends to leak and spill on to the circuit board
below. Tell tale sign is the pool of fluid when you access the front chassis.
Pull off the speaker grill and shine a flashlight on the inside
underneath the CRT circuit boards and look for the fluid. Glycerin
doesn't dry. TV is powering off most likely to protect itself from the