Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

F22 Error Code

I have a F22 error code - clothes in washer - can't open door.
Have hit the cancel button twice, unplugged - nothing - will not let me open door - or start another cycle. When I select another cycle to try to start it up again - has a clicking noice - then gives the F22 error code again.

Posted by on

  • 3 more comments 
  • Anonymous Oct 30, 2008

    I have the same problem, however this is the 2nd time this has happened in 3 months. I had the technician out to fix the first time at no cost...machine is only 1 year old - it better not cost me any $$$.

  • want2wash Feb 19, 2009

    I have the same error code F22, or should I say F...., mine is only 5 months old - I bought American made - why? Clearly this is a huge inconvenience, the repair man can't be here for a week. My clothes are locked inside.

  • Anonymous Mar 14, 2014

    Won't start, gives me dE every time I try to start it, the door closes fine, it clicks twice and then gives me the error code.

  • Anonymous Mar 28, 2014

    cannot open door washer

  • Anonymous Mar 29, 2014

    In the middle of a cycle, the washer went dark with no error code. We can't even open the door. The circuit breaker did not trip, and there is power at the outlet. Pressing the power button on the washer does nothing.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

My says 6f  what dose that mean 

Posted on Oct 30, 2008

TAKE 3 SCREWS OUT THAT HOLD THE BOTTOM FRONT PIECE REACH UP BEHIND AND ON THE DOOR LOCK MECHANISM THERE IS A ROUND PLASTIC DOOHICKEY PULL IT DOWN ABOUT 1/2 AN INCH OR AS FAR AS YOU CAN AND IT WILL UNLOCK THE DOOR. I WOULD UNPLUG UNIT FIRST. I DON'T KNOW ABOUT THE F22 THING. MY JUNKER DOES THE SAME THING PERIODICALLY, I UNPLUG AND REPLUG IT TO CORRECT

Posted on Sep 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MHW6000XW LIST OF ERROR CODES AND WHAT THEY MEAN


F20 water only problem insufficient water supply open both hot and cold unclog hoses
F21 Drain problem clogged,frozen kinked
SUD excess sud using non he detergent or to much detergent
F22 front door lock door not closed properly
For these select poepwer/cancel twice to cancel cycle
Other f codes select power/cancel twice select drain& spin if youhave excess water

Jul 10, 2015 | Maytag MHW6000XW - MaximaTM...

1 Answer

Door won't open on whirlpool duet washer frontload


Press the cancel button twice to cancel the error code. There should be an error code flashing -- for example 'F02'.

Nov 10, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Fault code f26


This error code indicates that the door needs to be opened and closed.

The F26 code may appear the first time you try to use the washer. Open and close the door to clear the display.

The F26 code may also appear if the washer has run three cycles without the door being opened. Open and close the door to clear the display.


If opening and closing the door does not remove the error display, press Pause/Off or Pause/Cancel twice.

If Pause/Off or Pause/Cancel does not work:

  1. Unplug the washer or disconnect the power for one minute.
  2. Plug in the washer or reconnect the power.
  3. Re-select the cycle and press Start.

Jul 30, 2011 | Maytag Washing Machines

1 Answer

Washer says f26 and won`t spin the clothes out. is there anything i can do?


This error code indicates that the door needs to be opened and closed.
The F26 code may appear the first time you try to use the washer. Open and close the door to clear the display.
The F26 code may also appear if the washer has run three cycles without the door being opened. Open and close the door to clear the display.
If opening and closing the door does not remove the error display, press Pause/Cancel twice.

The above procedure is the specified way by whirlpool technicians to clear the error code.

Feb 02, 2011 | Washing Machines

1 Answer

I have a Whirlpool WFW9200SQA12. F22 light


"F22" is a Door Lock error code. This is an indication of a door latch failure and/or interconnecting wiring problem. The first step in troubleshooting the problem, however, is to unplug the washer for AT LEAST 30 minutes in an attempt to reset the Central Control Unit (CCU). This is the main "brain" of your washing machine. Sometimes these error codes are erroneous and can be easily cleared by resetting the CCU. If the error code reappears following a CCU reset, then you have a genuine problem. In addition, if the door latch remains locked following this procedure, there is a manual release you can use to open the door. The following link explains:

http://www.fixya.com/support/r622155-kenmore_elite_whirlpool_duet_door_jammed

If you still have the error code displayed, inspect the door latch mechanism for any broken, loose, or missing components. Next, opne the top panel of the washer by removing the three screws in the rear of the washer that hold the panel in place. With the screws removed, the panel will slide back, then off. Locate the door latch on the right hand side behind the front panel. Inspect the wiring harness from the door lacth the to CCU. The CCU is located directly behind the wash tub in the top rear of the washer. Make sure all the connectors are snug and not loose or broken. In the majority of cases, a persistant error is a failed door lacth. If all these preliminary checks are unsuccessful, replace the door latch. The next link explains how:

http://www.fixya.com/support/r587965-door_latch_replacement_fdl_error

NOTE: "Fdl" is the same as an "F22" error code. This error code appears on older models.

I hope you find this information helpful. If you have questions please let me know.

Apr 12, 2009 | Whirlpool Washing Machines

2 Answers

Error code f22 whirlpool duet wash cycle


f22 is a door lock error try this hit cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what i did anyway.
If you're getting an F22 error, you will want to check anything to do with the door latch switch.

Mar 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Unable to cancel cycle and restart machine


Instead of hitting cancel twice, only press once,. You should hear the washer unlock. Then try to start again. If that doesn't work, try unplugging the washer in mid cycle. Are you getting and codes popping up?

Feb 22, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Cannot get washer door to open.


This error code indicates that the door is not locking.
Is the washer door firmly shut?
The door must be completely closed for the washer to operate. The door may look as if it's closed, but it may not be latched. Open the door and firmly close it.
Were you washing a large load?
Before you close the washer door, check for laundry items sticking out beyond the door opening. Leave enough space in the washer to allow the clothes to freely tumble. Reduce your load size if needed.
fl_doorseal.jpg To remove the error display, press Pause/Cancel twice.
hcz_003_web_env1.gif

If Pause/Cancel does not work:
  1. Unplug the washer or disconnect the power for one minute.
  2. Plug in the washer or reconnect the power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, and all of the other conditions above have been checked, call for service

Dec 14, 2008 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

F 26 Code that won't go away


The F26 error code on the Duet washer is a door switch error. The button inside the door opening might be stuck so that it doesn't register as being opened and closed. First press the pause/cancel button to clear the error display. Next push the button inside the door opening a few times and pull it so that it pops out completely. That should solve the problem.

Dec 29, 2007 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error dl h10?


use the manual release for now to open the door and press cancel button twice to clear code
What code??

Dec 09, 2007 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

1,935 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...