Question about Projection Televisions

Open Question

Magnavox model mlcd19 is trying to start up but keeps stopping the starting again then stoping ect...

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

My magnavox 50" DLP 50ML815D/17 will turn on and broadcast fine, but after about 30-40 minutes of viewing it will turn itself off & a red light comes on. If you feel the tv close to the bulb area it is...


Yes there is a Fan that keeps Lamp cool if it stops running Lamp will shut off it is designed that way to keep lamp cool also if Fans are OK it means Lamp is going out Call Mats 1-800-628-1118 for lamp

Sep 19, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Tv will not turn on


If it is a convergence issue, you can unplug the cable that connects the two boards all the way toward the front. If the tv comes on with a VERY bad picture(no convergence) then your problem is in the convergence ckt. If not, you could have problem with your small signal board. Also, the "yellow" problem you are having is that the cooling fluid in your blue tube is getting cloudy and needs to be changed.

Jul 06, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Tv Keep Shuting OFF And AFter A Few month Will Work And Deis ?


Check inside the Tv for dust blow it out, be careful if using air compressor not to damage anything,or shop vac with hose on to blow instead of ****.hope this might help.

Feb 01, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a Philips model 20pt1546/58.A few weeks ago is started to turn off by it self after aprox 20-30 minutes (with the power light on).I stoped using it for like 2 weeks and after that I plug it back...


for intermittent shut dow problems with this unit
it is a simple repair.
resolder conection on the yokes and check Capisitors C411=2200uf at 35v and c412 = 10uf at 50v on the main board

regards,
daniel.

Jan 15, 2009 | Mitsubishi VS-45607 45" Rear Projection...

2 Answers

Green blured color started at bottom left corner and growing


Based off manufactureing timeline it sounds like you have some capicitors going bad you will need to contact a qualified Service agent for a service call to repair the problem.

Jan 08, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Foggy picture


That is your coolant projection fluid make sure you clean up any that may have went on chassis ect.....refill fluid in lense make sure it does not leak and try again, tube should be same as before, when chaning fluid in lenses always turn set on look into lenses if clear it is ok if dirty looking then change fluid.

Dec 24, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Big screen won't come on


There is 2 things that will cause this and most of the time SSb board is bad cost 295.00 and up or your STK ics.big black convergence ICs

Dec 04, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Magnavox 55


Sounds to me like you need a new control panel board which should run you about $150-$200 max! might be semi burnt out like mine was and that is what i had to pay not sure if this helps but hey ya never know :)

Sep 08, 2008 | Philips Magnavox 55P9271 55" Rear...

1 Answer

Magnavox 55


It could possibly be the sensor or the front keyboard panel itself, most front keyboard panel circuit board have the Remote sensor on them

Sep 08, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...