Question about Hitachi Projection Televisions

Open Question

Hitachi L2601A HD TV. It suddenly died and the small light above the main on/standby light started to flash. It then slowly faded.... Any ideas?

Posted by on

6 Suggested Answers

ctf1800
  • 4402 Answers

SOURCE: jvc 52 inch hd-ila hdtv widescreen

you have a bad lamp or balast

Posted on Jan 22, 2008


techman
  • 3130 Answers

SOURCE: hitachi rear projection tv with no picture or sound

Depends on how old it is and what the model number is. Do you think all TV's are the same man? No they are not.

Posted on Mar 09, 2008

  • 1 Answer

SOURCE: flashing red light

I think this sounds like my problem (need to replace the projector lamp). However, when I hit the "on" button, my SXRD 50" blinks green for about a minute then starts blinking red. Can you confirm the bulb solution? I was very pleased with this sight when my fan malfunctioned. I got the fan in a matter of day's from Sony and it fixed that problem.

Posted on Mar 19, 2009

welcomejee
  • 10594 Answers

SOURCE: My SONY HD projection TV KDP-51WS550 (2005)

Hi, 5 times blink of standby light shows that TV needs White Balance adjustment. No need to dump it, adjustment is also not so difficult. Let me know if you want to give it a try to guide you.

Posted on Jun 15, 2009

roety
  • 585 Answers

SOURCE: tv suddenly started being blurry with red double

You need the convergence ICs replaced they are soldered in so its very technical , a repair shop will charge between $230 and $400 to replace them. you can try the autofocus or manual adjustments, but probably need the ICs and possibly a few resistors too.
(2)STK392-110 or kit # X480293 comes with 2 ICs and some resistors
gd lk
Eric

Posted on Aug 26, 2009

Slinteriors
  • 8617 Answers

SOURCE: Samsung HLP4674W - changed bulb - still no picture - lights flash

If the lamp has been replaced I would think the Lamp ballast would be most likliest followed by the color wheel and then the Digital board. You can get any part needed for your model at www.tvrepairworld.com just leave them a email they respond quickly.

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have sony lcd hd ready 50inch rear projector tv model number KDF-E50A12U tv comes on after couple minuets tv clicks off to stand by then red light in stand by flashs 3 times gos back to green repets


Hello
Three blinks of standby light to Sony TVs indicates that the regulated voltage output from power regulator board is above thatn normal. The problem is with its power supply regulator board. Replace all the electrolytic cpacitors on that board with new ones. Replace all of them including small and large ones, at one time. OK.

Feb 04, 2012 | Projection Televisions

2 Answers

No pic or sound


First unplug set and let set for several minutes the plug in and turn on. Could be in a serv mode.

Jul 13, 2009 | Hitachi 51F59 51" HDTV Projection...

2 Answers

My SONY HD projection TV KDP-51WS550 (2005) suddenly lost the picture and the Stand By /Timer light starting flashing 5x and then repeating. The next morning the TV came on and the flashing stopped. Turned...


Hi, 5 times blink of standby light shows that TV needs White Balance adjustment. No need to dump it, adjustment is also not so difficult. Let me know if you want to give it a try to guide you.

Jun 15, 2009 | Sony Grand WEGA KDP-51WS550 51" Rear...

1 Answer

Screen Goes Green TV goes to stand by blinking 8 times


try adjusting your color tuners located inside tv behind speakers.

Nov 25, 2008 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Only get red screen


Hello,

First of all Check Flash focus is working or not?(Flash focus should finish 1 full cycle)
If Flash focus not working you will have a error code in your screen.
If any error message or wont compelte full cycle you have problem with convergence amplifier IC
It could be one of your IC bad along with Couple of small Value resistor.

Dont Forget to Rate!!

Good Luck
Dals123

Oct 15, 2008 | Hitachi 61SWX10B 61" Rear Projection...

2 Answers

Flashing power light


you need 4 caps in you dm module they are 1000 mf @35volts

May 23, 2007 | Hitachi 43FDX20B 43" Rear Projection...

1 Answer

Hitachi 50UX58B won't turn on


try checking c707 you have to look close they go bad look around it i had the same problem a small pin hole burn in it

Sep 16, 2006 | Hitachi 50UX58B 50" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...