Question about D-Link DI 804V (DI-804V) Router

1 Answer

Router as cable modem

How do I configure my DI-711 or DI-714 to connect to a cable modem?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 196 Answers

This answer is for a Dynamic and Static Cable connection (I.E. ATnT-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast). Note: Please configure the router with the computer that was last connected directly to the cable modem. Step 1: Log into the web-based configuration by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2: Click on the Basic Setup tab. Dynamic IP Address is the default value, however, if Dynamic IP Address is not selected as the WAN type, select Dynamic IP Address by clicking on the radio button. Click Save and Restart. Step 3: Click on the Device Status tab and verify that you have a solid link between the router and the modem. If you do not have a solid link between the modem and the router follow the steps below: # Turn the cable modem off (first) # Turn the router off # Leave them off for 2 minutes** # Turn the cable modem on (first) # Wait until you get a solid cable light on the cable modem # Turn the router on # Wait 30 seconds ** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes. Step 4: Follow Step 1 again and log back into the web configuration. Click the Device Status tab . If you do not already have a public IP address under the WAN Ethernet heading, click on the DHCP Release and Renew buttons. Setup Static Cable Connection Step 1: Log into the web based configuration by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2: Click the Basic Setup tab. Select the Static IP Address radio button and enter in your static settings obtained from the ISP in the fields provided. Note: If you do not know your settings, you must contact your ISP. Step 3: Click on Save and Restart. Step 4: Click on the Device Status tab and verify that you have a solid link between the router and the modem. If you do not have a solid link between the modem and the router follow the steps below: # Power cycle the cable modem and router. # Turn the cable modem off (first) # Turn the router off # Leave them off for 2 minutes** # Turn the cable modem on (first) # Wait until you get a solid cable light on the cable modem # Turn the router on # Wait 30 seconds ** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.

Posted on Feb 16, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to connect DI524 for wireless connection to internet


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

May 16, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

The cable modem is working but my wireless router isn't connecting to the internet.


1. Log into the router
2. On the configuration page make sure the "clone MAC address" is bulleted or checked.
3. Save settings / restart cable modem.
4. After cable modem restarts then restart the router.
5. log back into the router then go to the status page and make sure you have an outside IP address.
6. Open a browser (internet) to verify you have connectivity.

May 20, 2010 | D-Link (DI-784) Wireless Router

1 Answer

No ip address


Many people need to connect additional computers or game consoles. To do this, most use a home network router, which shares a single IP address across multiple computers. No special configuration of your Shaw service or modem is required.

For information on how to configure a home network, consult the manufacturer's documentation included with the hub or router you have purchased.

  • Access the router configuration page.
  • Set the router to use Cable as Internet connection type.

Apr 07, 2010 | D-Link DI 514 Wireless Router (DI-514)

2 Answers

D-Link DI-524 is not communicating with modem


Checklist:
* Is DHCP configured correctly?
* Connect your server and laptop to a switch (not directly with the cable)
* Can they ping each other?
* Check that the firewall is configured (or switched off if you have another FW in place)
* Default gateway should be your router, not the computers (until you have configured RRAS for example)

Here you can find more information about how to configure various roles in 2008: http://technet.microsoft.com/en-us/windowsserver/2008/default.aspx

Sep 07, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Can't get my di-524 router to work


no a straight cable...you are going to need to clone your MAC address on your router so that your ISP can see it.. email me at techray1@live.com

Jun 02, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Lost my connection to wire less router , the phones were down last week and after that we have to plug into router


powercycle your homenetwork. this step works 90% of the time. to powercycle your homenetwork, shut pc down, unlpug the power cable from the router, then unplug the power cable from the modem. give atleast 10 -15 seconds for your devices to refresh the connection. then in turning them back on, replug the power cable for the modem first, with for the sync light be turn solid, replug power cable for the router, then turn pc on.. try pulling up websites, you should be online now. just in case you still can't, bypass the router and connect the modem straight to the pc first. try connecting online, if you can't configure the modem to go online, once done, connect the router back to the equation and reconfigure its settings. you the should be up and running. i can help more if you'll tell me what's the modem and the router..

Dec 13, 2008 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

D-Link connect to comcast


connect the the ethernet cable to the WAN port of the modem.

the connection should be:
One end of the cable is connected to the modem and the other should be connected at the WAN port of the modem.

Now use another Ethernet cable plug it in on the LAN port1 and the other end to your computer.

Access the configuration page of your router and set the wireless setting inside your DI-624 router.

Dec 10, 2008 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

Internet problem connection.....


your computer has been set up to be the PPPoE account holder for the modem. if you have a router, you will need to configure the router to login to the ISP account using the PPPoE information so that your router is the account holder for the modem, then you will be able attach multiple computers to the internet using the router.

Jun 21, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

I can't connect my belkin g mimo router to the internet


Who is your internet service provider if it is DSL you need to configure router for a PPPoE connection your DSL provider will provide you with username and password. IF it is cable configure router for dynamic connection and clone mac address.If does not work. Power cycle router and modem then turn on modem first then router.

Jun 20, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

DI-524


make sure you have the wireless lan activated(software/hardware) and also configure your router's wireless setting(connecting thelaptop to the router by ethernet cable).write the wireless configuration down and configure your laptop with the same SSID and WEP key.it shud connect and you shud able to be good to goo..don'tforget to configure your DSL to therouter.post your router/modem/ISP details for further help

Feb 02, 2008 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
D-Link DI 804V (DI-804V) Router Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...