Question about Whirlpool GEW9250 Electric Dryer

1 Answer

Wiring hook up in the back for whirpool dryer

Need to know the positive negative in order...wires are red white gree black..its a four wire

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Assuming you are referring to the power hookup,there is no positive negative, (it's not D.C.) red and black are the hot lines(240 volt between them) white is neutral and green is equipment ground.voltage reading should be 120 volts from red or black to white as well as green, 240 volts from red to black, 0 volts from white to green

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to wire a four wire power cord to a washer dryer stackable that only has three bolts to wire to


Green Wire hooks Screws into the case of the machine (Ground wire)
Red and black are powers wires and they go on the left and right screws. And the white wire is neutral which goes on the middle screw. Hope this helps.

Green to case, Red, White, Black

Apr 09, 2012 | Dryers

4 Answers

Maytag neptune dryer


Hey white to white, black to black red to the multi colored pole, and the green one is the ground wire,, . I done that before,, lol,, good luck ,, thanks

Oct 05, 2008 | Maytag Neptune MDE6700A Electric Dryer

2 Answers

We were given a HOT POINT Heavy Duty Dryer with Automatic Dry Control, Model DLB2650BRLWH, Serial No. DG241274H and had to buy the power cord to go with it. Ordered the cord from a local appliance company,...


Technical explanation: Older 240 Volt appliances use a three-wire power cord (Black, White, Red). The White wire is the "neutral" connection, which is tied to Ground at the service entrance panel. The Black and Red wires are opposite phases of the 240 VAC (when one goes positive, the other goes negative). The neutral wire is "in between", so measuring the voltage between the black or red wire and neutral would give you 120 VAC. The green wire is frame ground; the electrical code requires newer (since 2008) 240 VAC appliances to have a separate ground bonding connection to the frame; the neutral connection is not considered adequate protection for certain failure conditions.

Look for a screw head or terminal stud on the frame or sheet metal of the dryer labeled "Ground", "Earth", or one of the following ground symbols:
kato_tech.jpg kato_tech_0.jpg kato_tech_1.jpg

The green wire goes to this point. DO NOT connect the green wire to any of the wiring inside the dryer, unless it is a green wire attached to sheet metal or a bracket!

The black, white and red wires go to black, white and red terminals you already found.

Mar 17, 2011 | Hotpoint Dryers

2 Answers

We have moved and the three prong cord now needs to be four prong


Ok here is how to hook up looking at dryer. Left brass screw is hot put red or black wire on. Center screw silver is neutral put white wire on. Right brass is also hot put the red or black wire on which one you have left. The green you ground to the dryer body or you can put with the white wire.

The reason why you have to hot wires is that it is a 240 volt dryer. Each hot wire caries 120 volts. The hot wires are the red and black. The white is a neutral witch is also a ground

I hope this helps. If you have any questions please ask before you rate.

Good Luck And Thank You for the post

Oct 20, 2009 | Dryers

1 Answer

Plug problem


On a three wire configuration, the ground and the negative are tied together at the center position, using the dryer ground strap. Following is a description of the difference between three and four wire. Hope it helps you.
These two pictures illustrate the power wiring on a the terminal of an electric dryer. The one on top is the old-style three-wire configuration. Most people have this type in their homes. New code changes, though, require that dryers now have a four-wire cord, shown on the bottom.
Besides the number of wires in each cord, there are two important things to notice. First, in the four-wire configuration, notice that the dryer's grounding strap is folded back on itself. The whole point of the four-wire cord is to separate the ground from the neutral. The green wire (the "new" extra wire in the four-wire cord) is attached to the dryer cabinet. In the three-wire configuration, the grounding strap is left intact and the neutral and ground are tied together.


Sure hope this helps you find a resolution to your delimma! Best wishes.


949d841.jpg67160d9.jpg

Oct 01, 2009 | Whirlpool LER4634J Electric Dryer

1 Answer

After conversion from 3 prong to 4 prong dryer wont work


YOUR FOUR WIRE CORD IS AS FOLLOWS RED,BLACK WHITE AND GREEN ON YOUR DRYER YOU HAVE FROM LEFT TO RIGHT 123 CONNECTIONS THE TWO OUTERMOST(1 AND 3) ARE HOT LEADS SO HOOK RED TO 1 AND BLACK TO 3 NOW HOOK WHITE TO 2 AND THE GREEN CAN BE ON THE TERMINAL COVER SCREW OR NOT AT ALL BUT BE SURE IT CANNOT COME INTO CONTACT WITH RED OR BLACK

Apr 27, 2009 | Estate TEDX640JQ Electric Dryer

1 Answer

Install four prong plug kit


hi thanks for the question the green wire goes to the frame of the dryer other wires red to red white to white black to black thanks the appliance doc

Sep 15, 2008 | Kenmore 62872 Electric Dryer

1 Answer

How to hook up all four


code says disconnect green wire from dryer and tape off and put green wire from new cord in its place green wire from dryer actually connects right back to white wire

Aug 05, 2008 | Dryers

Not finding what you are looking for?
Whirlpool GEW9250 Electric Dryer Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...