Question about Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

1 Answer

Suction problem my proheat wont suction water out of carpet,,, it made a mess of my carpets now, any one no how to fix the suction problem?

Posted by on

  • 1 more comment 
  • gritch Sep 11, 2008

    I have the same problem.. This is the second machine I have owned. I thought it was just a bad machine with the first one. Now this one has it too... I am finished with Bissell.....

  • tneer Oct 01, 2008

    I have the same problem I have been trying to figure out how to **** up the water my floor is soaked

  • Anonymous Oct 12, 2008

    I have the same problenm, so now I just have wet dirty floors

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The valve on the bottom of the water bucket is not being pushed up enough to allow the vaccuum to go through. Perhaps a part is missing but I used a small ball bearing and a car vaccuum cap to build it up and now our works but it is still a piece of ****. I hope this helps

Today lemonaide is made of artificial flavors and furnature polish is made of real lemons.
Believe me that alot of stuff now is **** and you will find that out. I have to fix most stuff that comes right out of the box before we can use it. If I cannot I take the darn thing back. Welcome to the real world of the industry standards that have no ethics anymore.

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix Bissell ProHeat 2X 8300 carpet cleaner? It leaks cleaner fluid and has no suction.


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
gkjkgj

Jun 01, 2010 | Bissell Carpet Cleaner Powerbrush Deep...

1 Answer

Bissell carpet cleaner wont **** water out of carpet.


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
rw245

Apr 11, 2010 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Not sucking up water off carpet


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
fgqwe

Apr 03, 2010 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Bissell carpet cleaner


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

teydh

Nov 30, 2009 | Bissell ProHeat Turbo Deep Cleaner Upright...

2 Answers

Since the last use of my new ProHeat X2 carpet


Check the lint filter. It is located in the top clear plastic section (the one with the dial to switch from floor to tool mode). On the underside of this section is a small (about 1 inch square) red plastic piece with a little door on it. Flip open the door and you will probably find it is clogged. Clean it out and you should have full suction again.

Sep 19, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

I have the bissell x2 12 amp carpet shampooer


The water should be picked up fairly rapidly into the area surrounding the clean water bladder. Try checking the lint filter to fix your suction problem. It is located in the top clear plastic section (the one with the dial to switch from tool to floor use). One the under side of it there is a small (1 inch square) red filter with a little door on it. Flip open the door and it is probably clogged with hair, carpet fibre. etc.. Clean it out and you should have suction.

Jul 09, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

2 Answers

My carpet cleaner


There is a black ovule shaped gasket that sits between the top of the window nooze and the edge of the tank. If it is missing, then you lose suction at that point. Also is the filter on the end of the tank that sits over the square outlet clean?

Mar 22, 2008 | Bissell 1699 ProHeat Clear View Upright...

Not finding what you are looking for?
Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Brad Brown

Level 3 Expert

13542 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...