Question about Emerson EWL3706 37 in. LCD Television

3 Answers

I have an Emerson TV 32

When I turn my TV on, the green light comes on, blinks 3 times and the TV goes to standby with the red light on. We do not have cable or anything, so the TV has only been attached to a DVD player and the stereo speakers.
EMERSON MODEL - LC320EM81

I have unplugged it, waited 30 sec (and all night), replugged it and it still does the same thing. THANKS!

Posted by on

  • 1 more comment 
  • nowadog Dec 21, 2008

    Out of the blue, I have the same problem. Turn it on, green light is on, then switches to the red light. How can I fix this. This 32" flat screen TV was only purchased in Aug. 08.

  • Anonymous Dec 27, 2008

    We are having the same problem....TV was working fine when we went to bed and the next morning it wouldn't come back on. Of course, we are now over just past the 1 yr mark from when we purchased it.

  • Anonymous Jan 10, 2009

    My t.v. blinks three times and cuts back off I used my warranty to get it fixed and the problem returned less than two months later and this time it blinked about 5 time then returned to the original three and still wont cut on for more than a few seconds

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I turned on my tv and it blinks green continuesly. it wont turn off to red light. i unpluged it for 30 min. repluged it and green light comes on and wont stop blinking

Posted on Jan 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 51 Answers

You will need Power-Inverter board.
I do have them in stock!
Please be free to contact me at plasmatech@gmail.com

Posted on Dec 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

One of the rectifier diodes has shorted. $1.08 from mouser.com

Posted on Dec 30, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Media receiver "on" button flashes 8 times and turns the Pioneer TV to standby.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Oct 14, 2015 | Pioneer Televison & Video

2 Answers

Sony Grand WEGA KDF-60XBR950 60 green orange green red flashing light


3 blinks is a lamp cover error, did you make sure that the lamp cover is screwed in tight? Also check the lamp cover for deformity, there is a problem with your model where the set over heats and melts the lamp cover a little causing it not to make connection with the lamp cover switch. Let me know if you find either of these problems? If not we can troubleshoot a little further.

Tim Nolan

Sep 14, 2008 | Sony Grand WEGA KDF-60XBR950 60" Rear...

1 Answer

I have a Emerson 32" LC 320 EM1F, When I press power button, green light flashes 12 times then red light comes on and goes to standby. What seems to be the problem? How can I fix it?


It sounds that the main digital board has damaged. 12 blinks indicates it. if you wish to know more check this link for more details about 12 blinks to Emerson TVs

Jan 25, 2013 | Emerson Lc320em1f TV

1 Answer

Sony trinitron kv-es29m80 tv has no led light


The blinks are fault indication. If the standby light blinks 10 times and the set shuts down after that;
Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" board. If the transistors are bad, check R8051 and IC8005, also on the "D" board

Apr 12, 2012 | Televison & Video

1 Answer

W KDS-R50XBR1 50 in. HDTV Television standby light blinks red 3 times


Something you might want to look at:http://sites.google.com/site/sonylcdrptvproblems/lamp-overheating-issue

Apr 06, 2012 | Sony KDS-R50XBR1 50" HDTV

2 Answers

My Sony KP-46WT500 screen shows the tv image in blue only for a few seconds, then it goes completely blank (as if it were off). Do I need to replace the bulbs?


It is rear projection TV that use 3 picture tubes of red-green-blue to show color picture on tv front screen.
Do you see standby red light blinking when TV shuts off after showing blue image for a while?
If red standby light is blinking, please count it how many times it blinks, there would be 3 seconds pause between blinks so count pause to pause and post it here to find out possible solution.
Thanks.


Dec 22, 2009 | Sony KP-46WT500 46" Rear Projection...

2 Answers

Sony kde37xs955 green light blinks 9 and red light blinks 6


hi..
It's in standby mode.
Do a reset and see what happens
While holding down the reset button on the remote
Press the power button on the tv
(The tv will turn itself off the back on)
Now release the reset button
It sounds like the lamp needs replaced....

thank u!!
rate me!!!

Apr 10, 2009 | Sony WEGA KDE-42XBR950 42 in. HDTV Plasma...

1 Answer

TV won't come on. Standby goes green,then goes red blinks 3 times


3 flashes means the lamp door is not on correctly or the lamp door switch is broken.

Apr 08, 2009 | Sony Grand WEGA KF-50WE620 Television

1 Answer

42 in SONY LCD flat screen has red light blinking and won't turn on


Does the red light blink in a discernible pattern? How many times does it flash or blink?

Jul 11, 2008 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

Not finding what you are looking for?
Emerson EWL3706 37 in. LCD Television Logo

2,384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71006 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...