Question about D-Link Express EtherNetwork DI-604 Router

1 Answer

Save/load the configuration

How do I save/load the configuration file of my wireless router?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK. Step 3 Click the Tools tab and then click System to the left. Step 4 To save the configuration settings of your wireless router, click the Save button next to Save Settings To Local Hard Drive. To load a previously saved configuration file, click the Browse... button next to Load Settings From Local Hard Drive. Once you have located the file (config.bin) on your hard drive, click the OK button and then click Load.

Posted on Feb 16, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dont save configuration


Some routers when saving the configuration require you to stay on the page after clicking save, if you close or go to another page to quickly it stop the configuration save, stay on the same page after clicking save until the page refreshes.
Also make sure you are hardwired into the router not wireless, most newer routers do not allow access to the configuration using wireless and some allow you to see but not change the configuration wirelessly.

Jan 30, 2013 | 3Com WL ROUTER 3COM|3CRWER100-75 54M RTL...

2 Answers

What is my wireless network username and password?


if its default it will be on the bottom on the sticker if it does not work look for a reset button it is usally red and only a pin size this will make the password on the bottom work

Feb 16, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Hi!! i ordered this router from walmart.com . But it didnt come with the set-up wizard cd. My son has a playstation 3 and is trying to connect to the router. He told me the we needed the wpa2 key but it...


  1. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).
  2. Enter the user name (admin) and your password. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
  3. Wireless settings for the router may be configured manually or by using a wizard. To use the wizard, click the Wireless Connection Setup Wizard button and then follow the steps that are described below. To configure the wireless settings manually, click the Manual Wireless Connection Setup button. The Wireless Security section that directly follows this Configuration section provides additional explanation for how to configure the WEP, WPA, WPA2, and WPA/WPA2 wireless security mode options.
  4. Click Next to continue.
  5. Enter a Wireless Network Name in the textbox, which is also know as the SSID and select the desired level of wireless security, WEP, WPA. and then click Next to continue.
  6. Enter a Wireless Security Password in the textbox and then click Next to continue.
  7. This window displays a summary of your wireless security settings. Please print this out or record this information in a safe place and then click Save to continue.
  8. The Router will save your new settings and reboot. When it is finished after 1-2 minutes, the opening Wireless Setup window is displayed.

Here is the Manual for your Router:
ftp://files.dlink.com.au/products/DIR-600/Manuals/DIR-600_B1_Manual_v2.01.pdf

Feb 15, 2011 | D-Link DIR-600 Router

1 Answer

My internet card cannot save its configuration into modem


Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.


Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK.


Step 3 Click the Tools tab and then click System to the left.


Step 4 To save the configuration settings of your wireless router, click the Save button next to Save Settings To Local Hard Drive.


To load a previously saved configuration file, click the Browse... button next to Load Settings From Local Hard Drive. Once you have located the file (config.bin) on your hard drive, click the OK button and then click Load.

Jul 08, 2010 | Linksys WAG200G Router

1 Answer

My router fails to properly transmit signals


Hi Friend,

We need to upgrade the firmware and configure few wireless settings in order to resolve the issue. Please follw the steps to configure the wireless settings:

1.Open the router settings page (192.168.1.1)
2.Enter username and password(default password is admin and leave the username blank)
3.Click Wireless and fill the section as mentioned
Network Mode-Mixed
Network Name-As per your choice
Radio Band-Auto
Wide Channel-Auto
Standard channel-Auto
SSID Broadcast-Enabled and click Save Settings

4.Click Wireless Security and fill the section as mentioned:
Security Mode-WEP
Encryption-40/64 bits
Key1- 10 digit/ 10 letters(like your telephine number)
and click save settings.

5. Click Advanced Wireless Settings and fill the section as mentioned
Beacon Interval-75
Fragmentation Threshold-2306
RTS Threshold-2307 and click Save Settings

Now please follw the steps to upgrade the firmware of the router:

1. Click the link (http://homesupport.cisco.com/en-us/wireless/linksys/)
2.Enter the Model Number of the router and hit enter
3.Click the Download Tab
4.Select the hardware version of the router(Turn the router upside down and below the linksys logo you will see the model number with version)
5.Download the firmware and save it on desktop
6.On the router setup page click Administration and click Firmware upgrade
7.Click browse and select the firmware file from the desktop and click Start Upgrade.
8.Turn off the router for 30 seconds and after 30 seconds turn it on. Try to connect the wireless devices.

I hope this will resolve the issue.

Regards
Chiranjeet

May 20, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

How can i configure wireless broadband router 2.4


Hi Friend,

In order to configure the wireless settings of a router please follow the steps:

1.Open the router page (192.168.1.1)
2.Enter the username and password(default password is admin and leave the username blank)
3.On the router page click Wireless and fille the sections as mention:
Wireless network Mode-Mixed
Wireless network name-As per your choice
Wireless Channel-6-2.437GHz
Wireless SSID Broadcast-Enable and click Save settings.

4.Click Wireless settings and Select the security mode as WEP
WEP encryption-64 bits 10 hex digits
Key1- enter 10 digit or 10 letter password(like your telephone number) and click save settings.

5.Click Advanced Wireless Settings and fill these sections
Beacon Interval-75
Fragmentation Threshold-2306
RTS Threshold-2307 and click save settings

Turn off the router for 30seconds and then turn it on. Your network is now secured and you can try to connect your wireless devices.

Regards
Chiranjeet

May 19, 2010 | Linksys Wireless-G Broadband Router

1 Answer

Cd won't load on computer


You may configure your router without using the cd.

Using an ethernet cable, connect the router and the laptop so that you can configure it for internet connection.

1. check physical connection. modem to internet port of router. laptop to numbered port of the router.
2. check lights.
3. on your laptop go to the command prompt. (type cmd on the run window)
4. type ipconfig/all on the black screen
5. look for ip address. IP address should be in this range 192.168.0.*
6. open your internet explorer browser then type http://192.168.0.1
7. type admin on the username then password or 1234 on the password box.
8. configure the router for dsl or cable connection. don't forget to save
9. check if you have internet connection. if not, power cycle the modem and router.
10. once you're online, go to wireless tab. set your ssid (any name you want). set your encryption (either wep or wpa) don't forget to save
11. unplug the ethernet cable from the laptop and the router.
12. if the wireless card of the laptop is configured, you may click the wireless connection icon at the system tray (near the clock). enter your ssid and encryption.
13. you should have internet connection.

Nov 02, 2008 | NetGear WGR614 Wireless Router

1 Answer

Restoring former router settings


Is there any way you could possibly delete these save files?
Try restarting it by pressing and holding the button on the back of the router for 30 seconds/

Mar 22, 2008 | Siemens Efficient Networks SpeedStream...

1 Answer

"File not found" error message when I try to use a saved network settings file to


CAUSE This issue may occur if you change the file name from the default file name "Networksettings.xml". RESOLUTION To resolve this issue, do not click My settings are on a floppy on the Where are your network settings located? page in the Microsoft Broadband Networking Setup Wizard. Instead, click My settings are in a file available from this computer, locate the floppy disk drive, and then click your configuration file.

Feb 16, 2006 | Microsoft Broadband Networking MN-500...

Not finding what you are looking for?
D-Link Express EtherNetwork DI-604 Router Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...