Question about HP Pavilion dv2000t Notebook

1 Answer

Hp dv 2000 power switch wires 3

Hi i have problem i just want to know about the power on switch located on top left of laptop dv 2000 it has 3 pin wire in to the board ok and wen it goes to the on switch on the cover to power it it has 3 wire going in to it i need to know where each one goes
there is red black and brownonly cant tell were they should go dont wanna put them wrong and regret it lol thx any help would be useful

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

To know exact locations of the notebook inner parts, you can try the below manuals of DV2000. Hope this will resolve the issue.


http://h10032.www1.hp.com/ctg/Manual/c00729555.pdf

It is Service Manuals of your notebook model.

Posted on Sep 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect power switch to mother board


http://www.intel.com/support/motherboards/desktop/dg41rq/sb/CS-029925.htm

Click on -
Intel Desktop Board DG41RQ Product Guide - English (PDF)

Bookmarks menu to the left -

1) Click on the + sign to the left of -
1 Desktop Board Features
Click right on - Desktop Board Components
Or go to Page 11. (Adobe Reader page number box at top)

Front Panel header location marked by P, in the figure.

2) Click on the + sign to the left of -
Connecting to the Internal Headers and Connectors,
in the Bookmarks menu.

Click on - Front Panel header

Motherboard mounted in computer case, the Front Panel header is in the bottom/right corner, above the top black SATA connector.
Two rows of contact pins.

The Top row is numbered EVEN.
Starting at the Left side going across to the Right, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

The Bottom row is numbered ODD.
Starting at the Left side going across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
Pin 1 is for the Positive wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. Probably 5 Volts DC for factory testing.

D) Pins 2 and 4 are for the Power On LED. (Light)
This IS for a -> 2 wire LED. (Light)
Pin 2 is for the Positive wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

To the left of the Front Panel header is a 3-pin header.
This is the Alternate Front Panel LED header.
If you have a -> 3-wire LED, it connects here.

Also wanted you to have the motherboard manual.

Regards,
joecoolvette

Nov 04, 2012 | Intel DG41RQ Motherboard & Core 2 Duo...

1 Answer

MSI 760gm-p21(fx) MB, JFP1 AND JFP2 PINOUTS I NEED TO SEE A DIAGRAM SHOWING ME EXACTLY WHERE TO PLUG the cables on the MB


http://www.msi.com/product/mb/760GM-P21--FX-.html

Hover your mouse cursor on the Download tab.
(Overview/ Specification/ Download/ Support/ Where to Buy)

In the drop down list click on - Manual
On this page under the subheading Download, click on the blue -
M7641v3.0.zip
On the next page click on the country name nearest yours.

Motherboard User Manual.

This is a Zip file. If you do not know how to open a Zip file, please state in a Comment, and I will guide you.

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is divided into two headers on the motherboard.
This you have stated, JFP1 and JFP2.
(Junction Front Panel 1, and Junction Front Panel 2)

JFP1 is for the Power On switch, HarDDrive activity LED, Reset Switch, and a two wire Power On LED.

JFP2 is for an internal speaker/buzzer, and a three wire Power On LED. (Dual color)

JFP1:
4 pins across the Top row.
5 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right side, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the Harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is reserved for the factory to use.

D) Pins 2 and 4 are for a two wire Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR ON LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.
F) There is NO pin 10.

JFP2:
4 pins across the Top row.
3 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right, Top row;
Pins 2, 4, 6, and 8.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, and 5. There is NO pin 7.

A) Pins 1, 3 and 5 are for a dual color Power On LED.

Pin 1 is for the Negative ( - ) wire.
Pin 2 is for a Yellow, or Orange part of the dual color Power On LED.
Pin 3 is for a Green part of a dual color Power On LED.

B) Pins 2, 4, 6, and 8, are for a speaker/buzzer.

Pin 2 is for the Negative ( - ) wire of a speaker.
Pin 8 is for the Positive ( + ) wire of a speaker.

Pin 4 is for the Positive ( + ) wire of a buzzer.
Pin 6 is for the Negative ( - ) wire of a buzzer.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 28, 2012 | MSI Computers & Internet

1 Answer

Need pinout for A8N-LA front panel to mobo


Mike,

Going to detail it out, so those needing this info in the future also, can use it.

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&dlc=en

Scroll towards the bottom of the page for the motherboard illustration, and photo.

The front of a desktop computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires go to from the Front panel, is the Front panel header.

In the illustration, and as the motherboard sits in your computer case, the Front Panel is at the Bottom/Right corner.
In the Illustration it is F_PANEL1.

In the photo it is the black rectangular block, with 9 contact pins.
Two rows of pins.
4 on the Top row, 5 on the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side on the Top row, going across to the Right;
Pins 2, 4, 6, and 8.

Starting on the LEFT side on the Bottom row, going across to the Right:
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a RST SW is used.

C) Pin 9 is N/C.
Not Connected. Pin is reserved for factory use.

D) Pins 2 and 4 are for the Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

F) There is NO Pin 10. Just a blank spot.

Regards,
joecoolvette

Jul 24, 2012 | ASUS P5PE-VM Motherboard

1 Answer

Front panel configuration


Motherboard installed in computer case;
Processor to the Top, 3 Ram Memory slots to the Right, 5 white PCI slots to the Bottom;

Down in the Bottom/Right corner, is JFP1, and JFP2.

The Front Panel header is JFP1. (Junction Front Panel 1)
The header with two rows of pins, and is positioned Horizontal. It is parallel to the bottom of the motherboard.

(The other Front Panel header is JFP2. It is positioned Vertical, and is above JFP1. You may be using it also. Read on)

There are two rows of pins for JFP1.
5 across the Top, 4 across the Bottom.

The pins on the Top row are numbered ODD.
The pins on the Bottom row are numbered EVEN.

Top row, starting from the Right side, going towards the Left;
Pins 1, 3, 5, 7, and 9.

Bottom row, starting from the Right side, going towards the Left;
Pins 2, 4, 6, and 8. There is NO pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED light.
Pin 1 is for the Positive ( + ) wire.
If the Harddrive activity LED light is dim, when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for the Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is/was for the factory.

D) Pins 2 and 4 are for the Power On LED light. A Power On LED light that has 2 wires.
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

Looking at JFP2. (Junction Front Panel 2)
Vertical with two columns of pins.
3 on the Right side, 4 on the Left side.

The Right side is numbered EVEN.
The Left side is numbered ODD.

Starting at the Bottom on the Right side, going Up;
Pins 1, 3, and 5.
Starting at the Bottom on the Left side, going Up:
Pins 2, 4, 6, and 8.

A) Pins 1, 3, and 5, are for a Power On LED light, that has 3 wires.
Pin 1 is for the Positive wire. (Dual color LED )

B) Pins 2, 4, 6, and 8 are for a Speaker. The speaker for BIOS Beep Codes.
Pin 2 is for the Positive ( + ) wire.
Pin 8 is for the Negative ( - ) wire.

Regards,
joecoolvette

Jun 24, 2012 | MSI MS-6580 Motherboard

1 Answer

How to re-wire a Compaq Presario SR2150NX Case power Switch


The plastic front of your desktop computer is the Front Panel.

The area of contact pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

F_PANEL_1

The Front Panel header contains connections for the Power On switch, Power On LED light, HarDDrive activity LED light, and so on.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00864922&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3339274

(Look at the motherboard photo. The Front Panel header is at the bottom right. Scroll down for the motherboard illustration )

There are 9 contact pins.
4 across the Top row, and 5 across the Bottom row.

The four pins across the Top row are numbered EVEN.

From the Left side going towards the Right side;
Pins 2, 4, 6, and 8. There is NO pin 10, just a blank spot.

The five pins across the Bottom row are numbered ODD.
Pins 1, 3, 5, 7, and 9.

A) Pins 2 and 4 are for the Power On switch

B) Pins 6 and 8 are for the Power On LED

(LED is dim when the computer is on? Switch the wires around )

C) Pins 1 and 3 are for the HarDDrive activity LED

(LED is dim when the harddrive is operating? Switch the wires around)

D) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

How to know which wires are for the Power On switch, Power On LED, and HDD LED?

Follow the wires into the Front Panel. Remove the Front Panel, and follow them.
(Need guidance removing the Front Panel post in a Comment )

For additional questions please post in a Comment.

Regards,
joecoolvette

May 02, 2012 | HP Compaq Presario SR2150NX PC Desktop

2 Answers

Front panel pinout connections for ASUS A8M2N-LA (NodusM3


The Asus A8M2N-LA motherboard was made SPECIAL for HP.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00757531&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3339286

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00820191&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3339286

As such Asus has no info on it.

Looking at the second link posted (Motherboard Specifications), scroll down to the bottom, and click right on - Motherboard Layout

Motherboard layout shown (Direction), is the same as is installed in your computer; Processor to the Top, white PCI slots to the Bottom, Ram Memory to the Right.

The plastic front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the cables (Wires) go to from the Front Panel, is the Front Panel header.

Abbreviated F_PANEL 1, at the bottom right corner of the motherboard, is the Front Panel header.

There are 9 contact pins. Two rows.
Across the Top row they are numbered ODD.
Across the Bottom row they are numbered EVEN.

Coming from the Left side of the motherboard towards the right side, on the Top row;
Pins 1, 3, 5, and 7

Coming from the Left side of the motherboard towards the right side, on the Bottom row;
Pins 2, 4, 6, 8, and 10.

A) Pins 1 and 3 are for the HarDDrive activity LED light.
Pin 1 is for the Positive wire. ( + )
If the HDD LED is dim when operating, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive wire.

D) Pins 6 and 8 are for the Power On switch.

Regards,
joecoolvette

Apr 10, 2012 | Gigabyte Computers & Internet

1 Answer

Needed to move motherboard to new case because of overheating / ventilation problems - do not know what the power / reset / hdd led leads are for the 9 pin f_panel (new case has each as separate...


Photo of the Asus M2N78-LA motherboard,

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c01421635&dlc=en

This photo also shows the orientation (Direction), that the motherboard is sitting in a computer case.

To the very bottom right is the Front Panel header.

The front plastic panel of the computer is the Front Panel.

The area of pins on the motherboard that the cables, (Wires) from the Front Panel connect to, is the Front Panel header. ( F_PANEL )

The Front Panel header, is the black rectangular shaped plastic block, that is sitting vertically on the motherboard.

Has two columns of pins.
4 on the left side, 5 on the right side. Makes it look as though there is a pin missing, at the top left corner.

I'm going to number the pins.

Pins on the Left side starting at the Top, going down;

Pins 1, 3, 5, and 7.

Pins on the Right side starting at the Top, going down,

Pins 2, 4, 6, 8, and 10.


A) Pins 1 and 3 are for the Power On switch. (Power On button)

B) Pins 5 and 7 are for the Power On LED light.
Pin 7 is for the Positive ( + ) wire.
(If the LED light is dim, reverse the wires around)

C) Pins 4 and 6 are for a Reset switch, IF a Reset switch is used. (Reset button)

D) Pins 8 and 10 are for the HarDDrive activity LED light.
Pin 10 is for the Positive wire. ( + )
(If the HDD LED light is dim when operating, switch the wires around)

Pin 2 at the top Right is NOT used. (NC. Not Connected)

For additional questions please post in a Comment.
I am looking at a motherboard manual in PDF file form, for the Asus M2N78-LA motherboard.

Regards,
joecoolvette

Sep 03, 2011 | HEWLETT-PACKARD HP Pegatron M2N78-LA ASUS...

1 Answer

I need to know where to connect the three seperate 2 pin connectors from the ''power switch'' to the motherboard on my eMachines C2685 desktop computer.


The eMachines C2685 uses an FIC VC37GV motherboard. (First International Computer, Inc.)

http://www.motherboards.org/mobot/motherboards_d/FIC/VC37GV/

Here is the motherboard manual,

http://www.ime.org.uk/pdfs/vc37_vg31_b1_eng.pdf

After you click on the above link, give it up to 30 seconds to download. This is a PDF file.

Barring you cannot download the file, I will state the connections for the Front Panel header on the motherboard.
(Plus state the page to reference to, in case you can download)

View the first link, with the photo of the FIC VC37GV motherboard.

As shown, Processor is at the top, Ram Memory slots are to the right.

The Front Panel header is located at the very bottom right corner.

It is parallel to the outside edge of the motherboard. There are two rows of pins.
(Page 12)

The Front Panel header has 5 pins going across the top, and 4 pins across the bottom.

The top row of pins are numbered Odd.
The bottom row of pins are numbered Evenly.

On the Top row starting on the Right side, going towards the left, the pins are numbered 1, 3, 5, 7, and 9.

On the Bottom row starting on the Right side, going towards the left, the pins are numbered 2, 4, 6, and 8.

A) Pins 1 and 3 are for the HDD LED. (HarDDrive activity LED)

B) Pins 5 and 7 are for the Reset switch

C) Pins 2 and 4 are for a Dual Color Power On LED, if used.
Green goes to Pin 2. Yellow goes to Pin 4.

Otherwise Pin 2 is Positive, ( + ), and Pin 4 is Negative. ( - )

D) Pins 6 and 8 are for the Power On switch.
(PWR1, or SW1)

There is a small 3 pin header, just above the Front Panel header. (Page 12)

This is for a Power LED that has either two wires, or three wires.
The pins are numbered from Right to left.

Pin 1 is for the Power LED, and Pin 2 is for Ground, if using a two wire Power LED. (Not dual color)

Pin 1 is for the Power LED, and Pins 2 and 3 are for Ground (GND), if using a three wire Power LED.
(Page 13)

May 26, 2010 | Computers & Internet

1 Answer

I'd like to know the sequence to connect the following connectors:power sw, reset sw, power led, hdd led from the front panel to the motherboard (motherboard foxconn sis 651 m03. Thanks West


If your board is the one in this manual, the pins are located very close to the CMOS battery. Page 21 in that manual shows the diagram. Power LED is the top two left pins. Hard disc LED is the bottom two left pins. Power switch is the top two right pins. Reset switch is pins 3-4 on the bottom row. Pin 5 on the bottom is not used.

Apr 27, 2009 | Foxconn Computers & Internet

5 Answers

Lid switch location??????????


HP DV 5000 LID switch location is here:
65cfd24.jpg

If You want test lid switch, just connect A+B together for a monent!
If the monitor flashes on...? Lid switch is faulty.
It is too dificult to change the lid switch, so the easiest way is connect these pins together forever. :))

Dont forget to turn off your notebook... he wont sleep anymore ;))

c68c951.jpg

Greetings from Latvia.

lauris@bttehnologijas.lv

Feb 01, 2008 | HP Compaq Presario V5000T Notebook

Not finding what you are looking for?
HP Pavilion dv2000t Notebook Logo

1,054 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18344 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...