Question about D-Link Express EtherNetwork DI-604 Router

1 Answer

How do I use the Remote Management feature on my router?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers
Re: How do I use the Remote Management feature on my...

Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default: in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Tools tab and click the Admin button. Step 3 Select the Enabled button to enable Remote Management. In the IP Address field type in the public IP address you wish to manage the router. Note: If you don´t know the IP address or wish to allow more than one IP address to manage the router then put an asterisk (*) in the IP Address field. You cannot enter an IP range. Step 4 By default the port used to Remote Manage the router is set to 8080. Change the port number by selecting the down arrow next to the Port Number drop down menu. Step 5 Click on Apply and then click Continue to save the changes. To Remote Manage the router you will need to type in the Public IP Address of the router in your web browser along with the Port Number (separated by a colon) you selected in Step 4.

Posted on Feb 16, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to change routers password on my i pad

Hey mate, did you mean that you want to access web management feature and change your Wi-fi password through iPad? If so you need to open the web management feature, go to Wireless > Wireless security and change your password there. Save and reboot, hope this helps

Feb 15, 2014 | TP-LINK TL-WR740N Router

1 Answer

Remote Access

IF you are getting public ip from your isp, please go to administrator tab of the router and first change the router's password which is on the top on same page in black dots,,type your new password by deleting old one and re-confirm it just below and save it..router will prompt for the new password just to let you know settings are saved now enable remote managment option on the same page and port is 8080(default, you can use your own port number) and save you are ready to access your router remotely for that note down the public ip you are getting on your router's status page and in remote location you need to type something like :- http://x.x.x.x:8080...x.x.x.x is your internet ip (public) and 8080 is port number for remote management.

For host applications need to know which application you are running according to that need to open port in the router using Port Forwarding feature of the router.

Jul 15, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

Use 2 wire to run laptop

Yes you can use the laptop with this router because this is a wireless router.

Details of the router are:-

Manufacturer: 2wire Product MPN MPN 1000-400108-001 Key Features Router Functionalities dtrquestion.gif Wireless Access Point • DSL Modem • Firewall • DHCP Server Connectivity Wireless Interfaces Built-In 4-port Built-In Switch LAN Interfaces 10/100 Base-T Additional Interfaces 1 x USB Standards and Protocols LAN Standards IEEE 802.3 CSMA/CD or Ethernet • IEEE 802.3u 100 Mbps (Fast Ethernet) Protocols dtrquestion.gif AAL5 • ARP • ATM • DHCP • ICMP • IP • PPPoA • PPPoE • TCP • UDP Remote Management Protocol dtrquestion.gif SNMP • HTTP Firewall / VPN Firewall Features Stateful Packet Inspection (SPI) • NAT VPN Protocols IPSec Pass-Thru • PPTP Pass-Thru • L2TP Pass-Thru Authentication CHAP Wireless WLAN Standards IEEE 802.11b 802.11b Data Rates 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps Modulation dtrquestion.gif CCK • DBPSK • DQPSK • DSSS Security dtrquestion.gif WEP Antenna Type dtrquestion.gif Internal / Integrated Antenna x 3 Modem DSL Standards ADSL Lite (G.Lite ITU G.992.2) Other Features LED Indicators Power • DSL • Link Additional Features Auto Crossover (MDI/MDI-X) Dimensions Width 2 in. Depth 10 in. Height 8 in. Weight 1.4 lb. Miscellaneous Release Date December, 2003

May 03, 2010 | 2wire (1000-400108-001) Router

1 Answer

Cannot access remote management of WRT160N Router at all.

did you changed the Remote Management Web Interface to use a different port other than port 80? some defaults to use 8080. So in your case, try this address in IE:

Apr 11, 2009 | Linksys WRT160N Wireless Router

1 Answer

Port forwarding & Remote Management setup on Linksys WAG200G

here is how you set up port forwarding:

1. log into the router;
2. Click the Applications & Gaming link near the top of the page. 3. You should now see a new menu. Click Single Port Forwarding or Port Range Forwarding.
4, Enter sth like: HTTP; 80; 80; TCP;; check
5. When you're finished, click Save Settings near the bottom of the screen to save your changes.

go to administration-> remote administration to set up remote management
Remember, remote Administrator requires you to forward the 4899 ports.

Mar 23, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

D-Link DI 524 behind VNC access remotely - Need help....

Open a browser and type in htp:// to access your router's web management interface. Enter the username and password (default is username admin and no password)
Go to the Advanced Tab and Virtual Server
Private IP=IP Address of your Home notebook
Protocol Type=TCP
Private Port=5800
Public Port=5800
Set Schedule as you like
Enable the rule and click Apply.

To access you Home notebook from anywhere other than your house, go to

Next - remote management of the router.
The IP address that you enter on the remote management page is the IP address that is allowed to connect to the remote management. If the is the IP address of your office, this should work. Be sure you apply a password or anyone going to will have access to you router, I also recommend changing the port from 80 to 8080 so that has to be typed to access the remote management interface.

Jan 02, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Remote Access

If you want to access your router remotely, you just need to enable remote management on your router so you can access it using your internet IP colon the port number usually its port 8080.

May 09, 2008 | Routers

1 Answer

How can I manage the Prestige 310 ?

# Menu driven user interface for easy network management Local and remote console management # Windows configurator Telnet remote management # TFTP (Trivial File Transfer Protocol) firmware upgrade and configuration backup and restore

Feb 19, 2006 | Zyxel Prestige 310 (AM406100) Router

1 Answer

What are the differences between the FR114P and the previous RP114?

The FR114P has new features that provide better performance and value than the RP114. Specifically, the FR114P has: a. Better firewall functionality b. An improved user interface to get your network up and running quicker c. A faster microprocessor (75Mhz) and 10/100 WAN port for better throughput/security d. Remote management functionality for easy multi-site deployment e. Print server functionality

Feb 19, 2006 | NetGear (RP114NA) Router

Not finding what you are looking for?
D-Link Express EtherNetwork DI-604 Router Logo

Related Topics:

2,001 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts


Level 3 Expert

18259 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4329 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides