Question about Belkin (F5D72304F5D7000) Router

1 Answer

Is 54g certified by the Wi-Fi Alliance?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers
Re: Is 54g certified by the Wi-Fi Alliance?

54g products can be certified today by the Wi-Fi Alliance for interoperability with 802.11b products. Broadcom is working with the Wi-Fi alliance to accelerate interoperability testing among 802.11g products.

Posted on Feb 16, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi ive just brought a new samsung led tv with wi fi and iam tying to connect it via my belkin 54g wireless router but the tv can not find the router can u help help help plse......


i think you had better to see this link : here

because i dont know what OS you are using ?

you don,t describe how you are setting the router with your PC or TV ?

so refer to above link , hope to find ano solve the problem.

good luck


Jun 14, 2011 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

I want to add a laptop to my network or at least get access to the nternet through my Liksys/Cisco E2000. The laptop is running XP. It keeps asking for a WPA key. Can't find the WPA key.

Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) are two security protocols and security certification programs developed by the WF Allianceto secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the previous systems.

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!


There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Feb 04, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

Ipod wi fi conection

Wi-Fi Functionality
  1. Connects over the last Wi-Fi network you used that's available.
  2. If no Wi-Fi networks you've used are available, iPod touch will scan for Wi-Fi networks and show a list of Wi-Fi networks in range. Tap a network and, if necessary, enter the password to join. Networks that require a password show a lock icon (307189_1.jpg) next to them.
  3. Option to manually enter your Wi-Fi network name/SSID (if the Wi-Fi network is configured not to broadcast or be displayed to the public). If necessary, enter the password to join.
When iPod touch is connected to a Wi-Fi network, the Wi-Fi icon (307189_2.jpg) in the status bar at the top of the screen shows connection strength. The more bars you see, the stronger the connection.
Wi-Fi Settings
  1. Turn Wi-Fi on or off.
    Choose Settings > Wi-Fi and turn Wi-Fi on or off.
  2. Set iPod touch to ask if you want to join a new Wi-Fi network.
    When you are trying to access the Internet, by using Safari or YouTube for example, and you are not in range of a Wi-Fi network you have previously used, this option tells iPod touch to look for another network. iPod touch will display a list of all available Wi-Fi networks that you can choose from. Networks that require a password appear with a lock icon (307189_1.jpg).

    If "Ask to Join Networks" is turned off, you must manually join a network to connect to the Internet when a previously used network is unavailable.

    Choose Wi-Fi and turn "Ask to Join Networks" on or off. If you turn "Ask to Join Networks" off, you must join new networks manually.
  3. Join a Wi-Fi network manually.
    Choose Wi-Fi, wait a moment as iPod touch detects networks in range, then choose a network. If necessary, enter a password and tap Join. Networks that require a password appear with a lock icon.
  4. Make iPod touch forget a network, so that the device doesn't join it automatically. Choose Wi-Fi and tap the arrow (307189_3.jpg) next to a network you've joined before. Then tap "Forget this Network."
  5. Connect to a closed Wi-Fi network (an available Wi-Fi network that isn't shown in the list of scanned networks).
    Choose Wi-Fi, then tap Other and enter the network name. If the network requires a password, choose Security, tap the type of security the network uses, and enter the password. You must already know the network name, password, and security type to connect to a closed network. Some Wi-Fi networks may require you to enter or adjust additional settings, such as a client ID or static IP address. Ask the network administrator which settings to use.
  6. Adjust settings to connect to a Wi-Fi network
    Choose Wi-Fi, then tap the arrow (307189_3.jpg) next to a network.

Dec 27, 2010 | Cisco Linksys Wirelessn Router Black...

1 Answer

In network settings for bd c6500 it says "due to change of a wifi policy , cannot support the tkip security type in 802.11n mode." What does this mean.

The Wi-Fi Alliance has a timetable for eliminating outdated WEP and TKIP security from certified Wi-Fi devices: The Wi-Fi Alliance is eliminating older encryption methods from the certification process for new hardware.
TKIP and WEP won't be allowed in new devices with the Wi-Fi stamp in a staged elimination over three years starting in 2011.
Anyone reading this should be well aware that WEP (Wired Equivalent Privacy), the original local-link encryption standard in 802.11b, has been broken since 2001, and horribly so since 2003.
TKIP (Temporal Key Integrity Protocol) was a backwards compatible replacement introduced in 2003, and intended to work with older silicon that didn't have either the circuits or computing ability to handle WEP's real replacement, AES-CCMP ( AES-Counter Mode CBC-MAC Protocol). AES (also from 2003) is often called WPA2 encryption, although it's more particularly an encryption type that's part of WPA2.
In a nutshell, they're doing away with WEP and TKIP
The 802.11n standard only allows the use of AES keys.So you'll probably have to connect at 802.11b, or g speeds and settings. Might try to Right click on your Wireless Network Connection and select Properties.
Select Wireless Networks Tab
Enable the checkbox "Use Windows to configure my wireless network settings"
Click OK
Doesn't seem to bode well for XP users for the moment.
Hope this helps you.
Good luck
Hope this helps you

Nov 27, 2010 | Routers

1 Answer

My Sony Vaio employs a wireless connection to a Belkin 54g router. Problem free for months but for last few weeks it will not connect automatically showing "windows cannot connect to Belkin 54g". Will...


Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Sep 29, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

How do i get my cd to install

You can configure it without disk too.
Connect your router to computer with ethernet cable then you can access it with following default link.
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Then click on WAN settings and set wan settings as your internet service provider settings.
Enable DHCP if you want ip from router.

Click on wireless settings then WPA Security then not down code .It is your password to connect wi fi..
Then you can connect your wi fi network with that code.
Then save settings and restart router
Let me know if you need further assistance.
Thanks for using FixYa.

Jun 20, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

I purchased a new IPOD and I can not access the wifi from my Linksys wireless router.. I reset my Linksys router to try to solve this problem. And at first when the light was amber I was able to have...

Resolution If you know there is a nearby Wi-Fi network, but you are unable to locate it on the Settings > Wi-Fi screen:
  • Move closer to the Wi-Fi router or hotspot.
  • If you are using a personal Wi-Fi network, verify the Wi-Fi router is connected to power and turned on.
  • Wi-Fi networks configured as "closed" or "private" do not broadcast the network name to Wi-Fi devices.
    • Join a "closed" or "private" network by tapping Settings > Wi-Fi > Other and entering the Wi-Fi network name, security, and password.
After joining a Wi-Fi network, if you notice the signal strength is low or intermittent
  • Move closer to the Wi-Fi router or hotspot.
  • Check for any sources of potential interference.
  • Remove any cases or attachments on your device that could interfere with a Wi-Fi signal.
If you are unable to access the Internet while connected
  • If you are using a commercial Wi-Fi network that requires a special login or subscription, see this article for more information.
  • If you are in a location with multiple Wi-Fi networks, verify that you are selecting the correct network.
  • Verify that the Wi-Fi network settings are correct:
    • Tap Settings > Wi-Fi.
    • Locate the Wi-Fi network you are currently using and tap ts1398_2.jpg
  • You can configure network-specific settings, including IP address, DNS, and Search Domain settings.
  • Use "Forget this Network" to reset settings for this particular Wi-Fi network, including the password. This is also useful if you identify a network issue and want to prevent the device from automatically using this network in the future.
  • Use "Renew Lease" to acquire new IP address, DNS, and Search Domain information from the Wi-Fi network.
  • Note: If the Wi-Fi network uses MAC address filtering, you will need to add the MAC address to the access list for the Wi-Fi router. The MAC address for your device is listed as the Wi-Fi Address in Settings > General > About.
If you are still unable to join a Wi-Fi network, or are unable to access the Internet while connected, try the following
  • Restart the device
    • Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the power button to turn it back on.
  • Reset network settings by selecting Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings, including passwords, VPN, and APN settings.
  • iPhone only: If you continue to experience issues, consider turning off Wi-Fi and using the cellular data connection instead of Wi-Fi.
Additional Information If using a Wi-Fi router at home, refer to your user manual/documentation to assist you with some of these suggestions.
  • Check the manufacturer's website for your Wi-Fi router for firmware or software updates.
  • Verify the Wi-Fi router can broadcast an 802.11b/g signal. If using a 802.11n Wi-Fi router, consult the manual/documentation for how to configure the Wi-Fi router for 802.11b/g compatibility.
  • If you are using multiple WEP keys on your Wi-Fi router, try configuring your Wi-Fi router to use only a single WEP key.
  • Try or resetting (or turning off and then on again) your Wi-Fi router. Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
  • Disable wireless encryption or security on the Wi-Fi router to rule out encryption issues. If this resolves the issue, try using a different encryption or security protocol.

Mar 22, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Need to enter Wireless Key???

connect your router to computer with ethernet cable.
Then you can access it with following link.
for belkin routers
for other routers

type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
Let me know if you need further assistance.

Nov 15, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

2 Answers

What is a wpa key password

WPA is a type of security for a wirelss router to keep people out of the network without the key password. The password is used to log onto the router and allow the computer to communicate with the router and internet. The key is created using the wireless router settings menu and can be found on the same menu. If you do not know the key then you will need to hook the computer directly up to the router and use the router settings menu to find out what the key is.

Oct 06, 2009 | NetGear WGT624 Wireless Router

2 Answers

How do I know is my laptop wirless has a secure connection?

well first off you should plug a cat 5 cable into the router, login into the router and see what the ssid is and change it to your own so you know which one you are logging into, then check the security settings if it says none then you are not secured

Jul 20, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

Not finding what you are looking for?
Belkin (F5D72304F5D7000) Router Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides