Question about Denon D-M51DVS System

1 Answer

Unit automatically switches off

In the process of playing a DVD my Denon D-M51DVS system automatically stops playing the DVD and switches to stand-by mode (flashing orange light) The time between turning the machine on and it turning itself off seems to shorten as it continues to play the DVD and thus the machine gets hotter. I have tried to make sure the machine has enough space around it in case overheating is the cause of the shut down problem but to no avail

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 196 Answers

Maybe all you need is to dust off the DVD player's pickup. I have had this happen several times with several players. After dusting the pickup, those players are still in service.

Posted on Feb 15, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Denon 2910 CD player malfunctions


is this happening with all the cds??
the case may be with the cd sometime..where the tracks wouldnt have been properly completed...

Jul 13, 2008 | Denon DVD-2900 DVD Player

2 Answers

How to reset denon s 301receiver?


Instructions
  1. How to Reset Denon Receivers
    • 1 Save the information currently stored in your Denon receiver, such as device commands and multi-zone controls. Some Denon receivers can control multiple rooms and each room needs to be setup properly to provide the correct controls. If the receiver was installed professionally it may be best to contact the installer before resetting the device.
    • 2 Press the "Power" button or the "On/ Standby" button to shut off the receiver. On some receivers it is best to press the button on the device instead of the remote as the remote will normally put the receiver in standby mode. Ensure the display and all other lights on the device are off. Do not unplug the Denon receiver as it will not reset.
    • 3 Press the "Power" button and at the same time press two buttons on the front panel, which are determined by the model Denon you own. Most receivers identify the two buttons inside the user's manual, while some older Denon receivers require you contact Denon for the right button combination. For example, some Denon models require the "Standard" and "DSP Simulation" buttons to be pressed simultaneously.
    • 4 The display will start flashing at about one second intervals. Release the two buttons. Turn on the receiver by pressing the "Power" or the "On/ Standby" button to verify the previous settings and saved radio stations have been erased. If the interface does not flash, the reset was not complete and needs to be re-done. Re-enter the previous settings to ensure there are no further issues with the receiver.

Sep 09, 2014 | Toshiba DVR40 Multi System DVD Recorder...

1 Answer

Denon AVR - 2807 flickers in TV mode with picture & sound.


Change the hdmi cable and try. If not then you have an hdmi fault module.

Dec 15, 2013 | Denon AVR-2807 Receiver

1 Answer

When I turn on my ipod shuffle & hit play it blinks green and orange several times and won't play


The Apple iPod shuffle is a digital music player that contains a single indicator light that relays information about the device's battery condition, computer connection and any errors the device is having. The indicator light is capable of blinking red, green or orange as well as displaying a steady red, green or orange light. The iPod Shuffle includes a Universal Serial Bus interface and buttons on the front of the device for controlling music files.

Blinking Orange A blinking orange light indicates the iPod Shuffle is receiving an update via iTunes to the device's internal components. The update could include a patch to repair an error the player encountered once before, an update to the player's file-saving software, or a combination of security, repair and software updates. Updates are free and automatically sent directly from Apple through iTunes to your iPod shuffle before a sync process starts. Disconnecting iPod Shuffle When the player's light is blinking orange, do not unplug the device from your computer's USB port this will stop the update process and possible corrupt the device's internal hard drive. Let the update process and sync process finish before clicking "Eject" within iTunes and removing the player. Disk Use Enabled If you use your iPod Shuffle as a flash drive and not as a music player, a blinking orange light means that the device is connected to your computer and ready to accept files. The "Disk Use" enabled setting is changeable within iTunes if you decide to use your iPod Shuffle for music storage instead of file storage. When set up as a flash drive, the iPod Shuffle is assigned a drive letter by your computer's operating system and the drive lets you "drag and drop" files to the device. b> Charging If your iPod shuffle's battery is completely depleted or low on charge, connect the player to your computer immediately for charging then leave it connected to receive any updates to the device's software and internal components. Its indicator light may or may not blink orange until after it is fully charged. If the battery is low on charge or completely depleted, you may receive an error stating that the iPod is corrupt or needs restoring, close the error message and let the device fully charge.

b>

Feb 12, 2013 | Apple iPod Shuffle Second Gen.1 GB MP3...

1 Answer

DAEWOO/DVN8100N / After you put dvd in slot to start the play process , it will not load the dvd. it will close, start, stop ,( no disk) in display window. what is the fix?


Clean its optical pickup lens. Insert a lens cleaning disc into the machine, and play it. It will clean the optical lens automatically. If this do not help you, the optical pickup unit should be replaced.

May 27, 2012 | Televison & Video

1 Answer

Denon dvd 1730 plays no cds


It is likely a issue with the optical pickup in the unit or the unit needs cleaning (not likely but possible)

Apr 08, 2012 | Televison & Video

2 Answers

Cannot get BluRay/DVD system to respond to remote commands. Only the Samsung TV will. I cannot figure out how to switch the remote into giving only BluRay/DVD functions. I've read this unit has a...


Yes, the reason for this is that the BD-Receiver/TV button was pressed twice. This button has 2 modes of operation depending on the color it flashes when you press any button on the remote. If the BD-Receiver/TV button flashes green then it is in TV mode and if it flashes orange then it is in BD Receiver mode. The way to switch between the 2 modes is simple but not intuitive and easily not noticed. Simply press the BD-Receiver/TV button it will light-up green or orange, depending on what mode it is in, for about 1 second. The trick is to quickly press it again BEFORE the light goes out. When this is done the color of the light will change. If it was green it will change to orange and vice versa. Rember, Orange = BD Receiver function Green = TV
Hope this solution has been helpful?
Thank you for visiting FixYa.

Aug 20, 2011 | Samsung HT-C6730W Theater System

1 Answer

Denon avr-1804/884, speakers Bose vcs center, Bose acoustimass 5 series 3 speaker system, Bose 201 series 4. All speakers play in test mode, with tuner, dvd, phono, cassette. The left side speakers will...


You don't say how "TV audio" is entering the system.

My guess is you're using analog audio Out from the TV into an analog input on the Denon. One channel failing would probably be the Left Channel cable failing or not seated.

I always recommend bypassing the TV audio entirely if the programming comes from somewhere other than its own antenna, as TV audio electronics add nothing good to the process.

If you're using cable box, sat box, game, whatever, ITS audio is best sent directly to your Denon's specialized audio hardware - digitally, if possible, to preserve multichannel possibilities.

You could also run standard analog audio from the cable box to the TV analog Audio IN if you just want to watch news and weather on TV speakers without the Denon involved.

Jan 11, 2011 | Denon AVR-1804 Receiver

Not finding what you are looking for?
Denon D-M51DVS System Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5650 Answers

The Knight
The Knight

Level 3 Expert

76016 Answers

Morne Olivier

Level 2 Expert

257 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...