Question about Zoom DualCam 1300 (1599) Digital Camera

1 Answer

Help with my Zoom camera. ASAP

Hi Suddenly the computer stop recognizes my Zoom Zoom DualCam 1300 camera. Help please!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers
Re: Help with my Zoom camera. ASAP

There are several possibilities here: 1. another program that was installed or used got the settings all mixed up. reinstall the camera's drivers. 2. if camera is connected via a serial cable (COM), check for serial-code conflicts. 3. if you are using a firewire cable, turn both computer and camera on, and then connect them. do not turn off the camera while cable is still attached.

Posted on Feb 09, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Please help me to use Vivitar 650 - 1300 MM lens

The lens does not have the electronics to communicate with the camera. You must set the camera to the Manual exposure mode (turn the mode dial to M). You set the shutter speed by turning the command dial on the back of the camera. You set the aperture by turning the aperture ring on the lens. You get no exposure help from the camera's exposure meter.

May 27, 2012 | Vivitar 650-1300 Manual Focus T-Mount...

1 Answer

Hi, the zoom function on top of my G9 has suddenly stopped working is now quite sloppy and doesn't control zoom accurately?Any ideas? Thank you Nick

Does the zoom switch feel loose? There was a problem with G7 zoom switches - a spring in the switch used to break sometimes. Maybe it's the same problem, although I have never seen a G9 with that problem. Anyways, you will have to give it to a camera technician, unless you have experience in camera repairs. G9 is not a complicated camera, but it's not hard to damage it without the experience. To access the top cover from the bottom side, half of the camera has to be disassembled.

Mar 04, 2011 | Canon PowerShot G9 Digital Camera

1 Answer

I need to get the vivitar experience image manager software for my camera asap. Please advise. Thank you. My ''camera'' is a vivitar vivicam 5024, 2.4lcdmonitor,8xdigital zoom 5.1 mega pixels

You can download the manual from the below link:
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Mar 07, 2010 | Vivitar ViviCam 5024 Digital Camera

1 Answer

I have a dell inspiron 1300 with windows xp, but when I plug in my casio exilim z-40, my computer recognizes the camera but says there are no pictures on the camera (when there clearly is). Is there a...

As computer recognizes the camera but there is no pictures in the camera , To resolve it, visit this link and download both the software mentioned in Window XP section.
Good Luck...don't forget to rate the solution.

Feb 28, 2010 | Casio Exilim EX-Z40 Digital Camera

1 Answer

Hi, I have a DMC-FX30. When i turn the zoom

mera Digital Camera Hi, I have a DMC-FX30. When i turn the zoom Answer Failed: retry Hi, I have a DMC-FX30. When i turn the zoom swithc it is stiff and goes to full zoom and cannot be... (More) (More) Hi, I have a DMC-FX30. When i turn the zoom swithc it is stiff and goes to full zoom and cannot be stopped - only when i switch the camera off. Can you help?

Feb 11, 2010 | Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

DSC T33 ... HELP !!!

Yes, I can help you.
Your camera Sony DSC-T33 Cybershot has problem of CCD Imager and this part needs to be replaced.
Sony will repair it free of cost as per announced scheme. Please click Sony CCD Support for details.

Sep 27, 2008 | Sony Cyber-Shot DSC-T33 Digital Camera

1 Answer

Says lens error!!!!!

A lens error requires to be sent into repairs. Give them a call at 800-706-2534 option 2.

Apr 02, 2008 | Casio EXILIM ZOOM EX-Z60 Digital Camera

3 Answers

Fuji finepix 2800

If there is solution out there please post it. I have the same problem

Dec 02, 2007 | Fuji FinePix 2800 Zoom Digital Camera

Not finding what you are looking for?
Zoom DualCam 1300 (1599) Digital Camera Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zoom Digital Cameras Experts


Level 3 Expert

93869 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

3283 Answers

Are you a Zoom Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides