Question about Pioneer PRO-200 60" Rear Projection Television

1 Answer

Loud crackling sound followed by A/V Loss

Recently my Pioneer Elite Pro200 has been losing A/V after a loud crackling sound, but if disconnect and restore power it works again. I know it's only a matter of time before it will not recover. Please help!

Posted by on

  • 428CobraJet Sep 09, 2008

    Ronnie ...I knew it was the main power supply that was cutting out, but I'm curious if you or anyone else knows if there's a relay that engages the main power supply? I know there's a pre amp that keeps the circuitry warm even when it's off, but I'm not sure how or what clicks the main power supply on. When the A/V loss happens the red LED that indicates that the TV is off is lit like it should be, but there's no way to restore power unless you unplug the TV. When you plug the TV back in the red LED lights up again as it should, however now when you hit the Power button you hear the normal click and the picture comes back.

    I appreciate your time and interest in helping.

  • tmtiano Apr 08, 2009

    TV powers up and comes in distorted, straightens self out and is fine for I - 3 minutes then increases volume rapidly and dies out.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Have the main power supply checked

Posted on Sep 07, 2008

  • Ronnie Houston Sep 09, 2008

    the power supply is xoldered to the main board and to my knowledge there is no certain way of testing it without a proper amp meter.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong with my Samsung HLS42WX/XAA everytime I turn it on after ten minutes the volume start making a loud crackling sound then there is no volume sound at all. What do I need to do to get this


It clearly may be a sound problem in the set but a few things you might check, First of course is do you have this issue on all inputs including the rear ones, does a DVD player connected to a rear input do this or not?

If you have a box connected to this set unplug both the box and set from power for a while, cannot hurt but may help.

If using a box and set does not do this with a DVD it may be possible to get around the problem.

A box or even the tuner in the set may be the cause==your tuner not only processes regular signal but also develops the sound signal, it may be bad.

Dec 23, 2012 | Projection Televisions

Tip

Pioneer Pro Elite Rear Projection TV with Sudden loud pop then shuts down


You may need the power supply board resoldered as I had the same problem. The guy listed below can do it for you as I shipped mine from Illinois to him in California... Piece of cake getting the board out of the back and it's not too fraigile... Just pack in bubble wrap and it will be fine. My TV is now working great.

BUT DON'T DELAY AS SOONER LATER TV WILL NOT RESTART..


http://www.avsforum.com/avs-vb/showthread.php?t=402397&pp=30&page=38

Good luck.



cell

on Jan 16, 2008 | Pioneer PRO-200 60" Rear Projection...

1 Answer

Pioneer elite pro-520hd pop noise then red lihgt on back


Cracked and bad solder connections all over the power board--seen about 20 of these with this.

Dec 16, 2012 | Projection Televisions

1 Answer

My set started humming recently. Not real loud,


Hi, sounds like a bad color wheel, a technical repair that should be done be a trained repairman, cost around $250-275 installed

Aug 17, 2009 | Samsung HL-S5087W DLP TV

1 Answer

Tv makes a popping sound, then shuts off


its a cold solder. there are some lose connections. resolder all the boards.

May 10, 2009 | Projection Televisions

1 Answer

Hdtv dlp 52 inch loss of picture and loud buzzing noise


Please see http://www.fixya.com/support/t1011937-transformers. It sounds like your flyback transformer is not properly soldered down/is failing.

Sep 06, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Pioneer elite 50" 1080 plasma pro-110FD We were watching the TV and suddenly it turn off with a loud boom sound, were trying to turn it on again but it only show a haft screen for a second then it...


You should be able to get in-home warranty service or an exchange at no cost. Don't void the warranty by trying to fix it yourself. Contact your dealer or manufacturer for service or a replacement.

Hope this helps :)

Apr 01, 2008 | Projection Televisions

2 Answers

Replacing power board on pioneer pro 200 elite


364.00 for a new Power/deflection board through pioneer. i am including a link to their site. You may find it cheaper someplace else on line, but pioneer will have better quality parts. hope this helps. heres the link.
http://parts.pioneerelectronics.com/model.asp?modelNum=PRO200

Jan 15, 2008 | Pioneer PRO-200 60" Rear Projection...

1 Answer

No picture


sounds like high voltage arcing,/flyback,focus block,h.v. anode lead etc.

Sep 07, 2007 | Toshiba 55H70 55" Rear Projection...

2 Answers

Pioneer Elite PRO200 PROBLEMS


TEAMPRO-THAT MODEL IS KNOWN FOR LOOSE CONNECTIONS ON THE DEFLECTION PCB.YOU CAN A)ORDER A NEW DEFLECTION PCB,OR B)TRY RESOLDERING ALL CONNECTIONS UNDER THE DEFLECTION PCB ESPECIALLY NEAR THE FLYBACK TRANSFPORMER.JOE TV

Aug 03, 2007 | Pioneer PRO-200 60" Rear Projection...

Not finding what you are looking for?
Pioneer PRO-200 60" Rear Projection Television Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

61229 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...