Question about Protron PLTV-32 Television

1 Answer

My ypbpr1 does not work - Protron PLTV-32 Television

Posted by on

  • clydebx2005 Sep 08, 2008

    my ac adapter does not work anymore how do i get a new one

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tv was working then went blank and YPbPr1 appeared in top right corner.

Posted on Dec 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My neighbor gave me her tv because she has just bought a new one. I plugged it into the wall and hooked up my ps3 to it to watch netflix. I watch for about an hour or so and then i decided i wanted to move...


I tried to download the manual but had no success. The set has it's input set to the component video input. You need to change the input to the correct HDMI input. If you don't have the owners manual see if your friend does or if they can tell you how to change the input.

Sep 22, 2013 | Proview PA-37JK1A 37 in. LCD Television

1 Answer

High Def input search


It sounds like you arent using the correct ports for a HD tv or arent using a HD digital player or HD cable. Still having problem let me know but thats what it looks like to me. Do you have anything plugged into these ports from a HD device? DVD,Digital Recorder, etc?

Sep 11, 2007 | HP PL4245N 42 in. HD-Ready Plasma...

1 Answer

Im having problems with my brand new Westinghouse LD4255VX. i bought it tonight, took it home and took it out of the box. at first it turned on fine, then got to about the 3rd step in the setup menu and...


It sounds like the problem is simply the input selection.

SELECTING THE INPUT SOURCE

There are two ways to select the video input source.

Using the Individual Input Keys
TV, PC, Video, YPbPr, HDMI Keys

Press any of the following remote control keys to change the input source: TV, PC, Video1, YPbPr1, HDMI1, or HDMI2.

Let me know if this fixes your problem

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 05, 2011 | Flat Panel Televisions

1 Answer

Installed a Wii to YPbPr1 port. display is B&W, no color. How do I get the display in color?


Unless the Wii is sending the video signal in component form, you have a case where the signals are not compatible. The Wii is sending "composite" and the TV is expecting component. With the composite signal the Y input, the result will be a B&W picture. Either set the Wii to send component or connect it to the composite input on the TV.

Dan

May 12, 2009 | Flat Panel Televisions

1 Answer

Ilo 42" Widescreen Plasma TV - Has NO TV


I was told by another tusted repair org. that this brand has to be sent back to Ilo in the original box to them for repair. And that no one has any part parts for this brand.

Sep 26, 2008 | iLO 3200 32 in. LCD Television

1 Answer

Television picture issues...


I had the same problem when I accidently hit the remote. If you are hooked up to cable make sure INPUT is on the correct setting -- AV, S-Video, YPbPr1, YPbPr2, VGA, HDMI1, HDMI2, ATV & DTV (see button on TV or remote). Hope this solves your problem.

Jul 27, 2008 | Astar LTV-3201 32 in. LCD Television

1 Answer

Progressive scan


Approach 1: Try unplugging the DVD player from the wall for an hour, then plug it back in. It may or may not reset to the factory default settings, which might put it back to "interlaced" output.

Approach 2: When a DVD player is switched to progressive scan, it uses outputs different from the coax cable "TV out" and the COMPOSITE outputs (often yellow, white and red RCA jacks. If you have the proper cables, you can connect them to both the DVD player and the TV, then cycle through the AKAI TV's "source" settings to switch the TV to the new cable input location.

For example, if the DVD player has "component" outputs (marked Y, Pb, and Pr) hook up RCA plug cables between those jacks and the AKAI TV's Y, Pb, and Pr jacks. Connect the Y to Y, the Pb to Pb, and the Pr to Pr, of course. The LCT3285TA has two sets of these jacks. Either will do, but note if you use YPbPr1 or YPbPr2. Once this is done, push the source button on the side of the TV (or on the TV's original remote) until it shows YPbPr1 or (...2 if that's what you connected). If the DVD player is on, you should now see the DVD menu or the picture from the DVD. Now you can use the DVD remote to switch back from progressive to interlaced video. The picture may go blank at this step.

Now push the TV's source button again until you see "3" or whatever channel you had been using in the upper left of the TV screen. You should see the DVD output picture (menu) again. Back to normal.

If your DVD player doesn't have YPbPr connections, it may have a HDMI or DVI jack.
The AKAI TV also has a HDMI input, you *could* get and HDMI cable (or DVI to HDMI cable if the DVD player doesn't have HDMI), hook it up, then cycle through the TV's source inputs until you see the HDMI in the upper left... in the manner I've just described.

Final Note: The progressive scan output of your DVD will actually give you a much better picture on your AKAI TV than its interlaced output. To take advantage of that, you'll have to hook up YPbPr or HDMI cables between player and TV and switch sources when you want to watch DVDs instead of TV programs. You may need additional cables to send the stereo audio output from the player to the TV for the progressive source hookup.

Jan 05, 2008 | Akai LCT3285TA 32 in. LCD Television

1 Answer

Display settings went haywire


I had the same problem and in the end it took for an engineer to replace a part at a cost of £120...

Nov 12, 2007 | Syntax Olevia LT32HV 32 in. HD-Ready LCD...

2 Answers

LTV-40w1 HDC Westinghouse TV


I had the same issue. I just bought this tv. I went to source on the side of the tv pushed the input button til it went to YPbPr1 and the screen came up. My HD cable box is a little old so I'm using that instead of HDMI. But if your using HDMI just keep hitting that button til you see HDMI and it should work.

Sep 19, 2007 | Westinghouse LTV-40w1 HDC 40.02 in. LCD...

Not finding what you are looking for?
Protron PLTV-32 Television Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Protron Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...