Question about Philips Magnavox 51MP392H Rear Projection Television

1 Answer

Magnavox Television Issue

I have a rear projection television made by magnavox. yesturday out of the blue the picture is blury, you can tell when you look at lettering it is off, like there are two sets, like seeing double. Was wondering if you knew what the problem might be and if this is something that happens a lot in these type of televisions, we bought this tv in 2004. Thanks

Posted by on

  • 2 more comments 
  • lilimaye Sep 07, 2008

    blurry screen and to bright

  • reneestiles Sep 10, 2008

    Tonight we were watching our TV, the picture was fine. We walked away from it for about an hour, came back to a blurred screen, as if it almost looks like you are watching a 3-d movie without the proper 3-d glasses. Should there have been any warnings or should we have noticed a difference in our picture before this just happend? How common is this problem?

  • haugemari Dec 01, 2008

    Today we were watching tv, we wlaked away and came back and there was double vision, almost as if the lights shifted inside. We took the screen off to see if it was the lights but they seem fine. All three lights were on and working.

  • mbrown13353 Jan 17, 2009

    i have a magnavox 51mp392h/17 rear projection. when i turn on the tv and their is any bullitens going across the bottom of the screen their are two sets of them and one is in blue running across alot higher than the other one.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,617 Answers

Yes the convergence Ics are bad you will need to replace both convergence ICs they are STK392-120 and you will also need four 6.8 ohm 1watt resistors. You can get the replacement parts at the following link with free installation instructions with pictures.
http://servicemanuals.vstore.ca/

Posted on Sep 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture has red and blue shadow images


thats a fairly easy fix. You need the DPTV305-DPTV345 convergence repair kit available at the following link.
http://servicemanuals.vstore.ca/
The kit contains the parts and the CD with instructions

Sep 29, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a 8p6044 c101 that has a very dim and slitly blury picture


Philip Magnavox sets have a clear fluid that floats between the lens and the tube. It is used to keep the tube cool. After a few years the fluid will get cloudy and cause the video to have one or more of the following symptoms...

  • Video looks dull
  • Video looks bright white
  • Video looks red
  • images have halos around them
You can see some examples and find a fix here...


http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 26, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

3-d look on words and unclear picture


Go to convergence in the menu. If you colors will not move you need convergence amps. Have professional install

Apr 08, 2009 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Magnovox 9P5531 C102


you need to change the coolant in the CRTs. Thats a common problem with the blue and green CRT in phillips magnavox rear projectionsIt makes the color and clarity as good as new after the coolant has been changed. If you need more info let me know, as there is a kit that has the coolant for all 3 tubes and CD with the step by step instructions with pictures available.

Jul 07, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Magnavox 9p6040


Sounds like a solder or connection issue on the small signal panel. which is the ciruit baord on the left hand side of the set looking in from the rear of the set.

Jun 13, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

New bulb replacment for 51mp392h magnavox


you dont have bulbs you have crt's (picture tubes) red green blue. Tell me which one you need and I can post you a link, it's not hard but you do need the service manual for your tv to set it up right

Apr 25, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Problem with convergence


bad convergence ic's
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 03, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Adjusting colors on a magnavox 46" projection TV


Replace the CRT fluid. It grows algea in the blue and green only. 9.99 from MCM electronics.

Oct 19, 2007 | Philips 46PP9302 46" Rear Projection...

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...