Question about Siemens Washing Machines

2 Answers

SIWAMAT 6102 (GB) Code 3 Flashing. What does this error mean

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The pump was working but not pumping. The rubber hose from the bottom of the drum to the pump was removed and found to be partially blocked. The debris inside the rubber hose was cleaned out and reassembled with no further problems.

Posted on Sep 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I need a manual for SIEMENS SIWAMAT 6102 how do i get one?
Thanks

Posted on Jul 10, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does f23 error mean?


Display shows an error code - Front-load washer ' Whirlpool ...

https://www.whirlpool.com/...error-code...w...
Whirlpool Home AppliancesCheck the following answers for error-code related issues you can correct: ... Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33.

What does error code f23 flashing mean on a Whirlpool ...


Nov 30, 2015 | Washing Machines

1 Answer

Kenmore washer


I need manual in English for SIEMENS SIWAMAT 6102 can anyone send me one? Tx

Jul 07, 2013 | Washing Machines

1 Answer

Lg wm2101hw code le


Press "end of cycle" for 3 seconds or till the flashing goes off . Plug off the wall. Code can be an indication of several issues. The most common cause is over sudsing in the machine. Overloading the wash with too much laundry may also cause the LE error code. Lastly, a breakdown in the signal between the microprocessor and the motor may cause that error code. This can occur if there is a loose wire, see that all wires are tightened..........
Click helped if helped.........

Mar 15, 2013 | LG WM2101HW 4.0 cu.ft. Washer

1 Answer

Front load washer, F02 error is flashing on board. What does error code mean?


F02 error means if the drain time has exceeded more than 8 minutes. After four minutes suds will be displayed on the screen and again after 4 minutes the F02 error code appears.


Check the drain line for any clogs or blocks which hinder the draining procedure..Use of more detergent can even cause this condition..Be sure you are using only 2 tablespoons of HE soap and not more than that.

Check your drain filter also and replace them if needed. Remove the 3 Torx head screws (located left, center, and right) from the front bottom kick panel of the washer. The drain/filter/pump is right in front.

Mar 11, 2011 | Kenmore Washing Machines

1 Answer

Hi there does the siemens siwamat 6102 washing machine have an hot water inlet valve, Regards Robert


Yes - mine has just frozen in the garage and cracked whilst defrosting. Water everywhere. Does anyone know if I can bypass it and run the M/C on cold only?

Nov 25, 2010 | Washing Machines

1 Answer

BOSCH WAA24270GB error code 0 and 2 backwards rr


Press START button over 10 second, its working for me

Apr 09, 2010 | Bosch Washing Machines

1 Answer

I have a seimens washer drier. The problem, shortly, is that it won't go onto or past the 'rinsing' cycle. The machine will fill with water and do the wash part of the cycle, but not go any further. It...


It appears your timer/main controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 07, 2009 | Washing Machines

2 Answers

On a hotpoint aqualtis aqxx149pm i get error code f8 flashing


Hi.
F8 means that heater relay cannot be activated, you need to call an engineer.
Could be expensive, possibly a new control board needed

Nov 19, 2008 | Hotpoint WMA35 Front Load Washer

2 Answers

LG washer code LE or IE showing up


LE Code continues to appear. What does this mean and how to fix problem?

Pete

Nov 18, 2008 | LG WM1814CW Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

2,312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...