Question about Frigidaire FEX831CS Top Load Stacked Washer/Dryer

2 Answers

Frigidaire washer dryer combo

Dryer tries to stat but does not start

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Scoobymom196,

You said, The dryer tries to start but fails!

Huuum: At your service!

It sounds like a bad electrical switch in the dryers start button!
I am sorry to tell you that you need hands on service to remedy this situation.
If only I was there I could help you!



How old is the appliance? if it is old it may not be cost effective to spend good money into bad!
New appliance are so much more efficient today that they can save you a lot of money in energy!!!!
You need a hands on tech for this repair!


You will be fine
Bless You huuum
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF

Posted on Sep 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Jus bought a cmbo unit that was never installed  and is a couple of years old.  habd to transport it on it's side.  now when i go to turn on the washer it makes a clicking noise.  but dose turn .  is there some sort of transportation lock on the washer drum? i never got any instalation manual.  

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer Dryer Stacked Combo won't start and didn't drain properly.


Hello Joshua, thank you for your post!
From my understanding your Frigidaire laundry center is not starting and did not drain properly. It is possible that this could be a miscommunication within the laundry center and a reset may help clear that out for you. In order to reset your laundry center you would need to disconnect power from it for at least ten minutes. If that does not help your laundry center you may need to seek assistance from a professional technician for proper repairs. I hope this is helpful and if you should need further assistance please feel free to reconnect. -Matt

Apr 11, 2016 | Frigidaire Washing Machines

1 Answer

Frigidaire Washer Dryer Combo (Stacked) We had to have the power shut off to our house. Now that it is turned back on, our washer dryer combo won't start.


Thank you for your inquiry, Caroline!

From the information you have provided your Frigidaire laundry center is no longer working. I understand that you had to shut off power to your house and now your laundry center is not coming on. It sounds like you could have a possible short within your timer. I would recommend performing a reset on your laundry center and you can do that by unplugging the power cord for roughly ten minutes. If you continue to have issues with your dishwasher can you provide me with your model number? In order to locate your model number you can find the serial tag and that should be located on the inside wall of your dishwasher. I look forward to assisting you further. -OOS

Mar 23, 2015 | Koolatron 1.7cuft Thermoelectric Fridge

1 Answer

Maytag epic z power button wont start machine


Maytag dryer. has no start check door switch. if not door switch then its your relay board that may be bad also check all stats.
there will be 2 at blower cage and 2 on heater assembly
The 2 on blower cage one of these are a resister stat has to be exact resistance or dryer wont start or will start and then shut off dryer b4 it is completed drying hope this helps there should be a cheat sheet paper work that will help you diagnose your problem fallow the steps if not with dryer can be viewed online

Jun 25, 2014 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Why would a frigidaire flse60rgs1 combo dryer runs but not heat and washer not start?


check out house breaker and could be heating element problem or thermostat issues ,not enough info for more respond .

May 18, 2014 | Washing Machines

1 Answer

No heat


hi take heater cover off back of dryer on top you have 2 stats take left 1 off turn upside down if it looks bent inward that is faulty try this. side which faces heater element give it a good nock on hard surface if it curves out it should work now but sum stats you cant do this u can bypass stat just to try it but only try dont use dryer with stat bypassed its dangerous if you have to buy stats they come in pairs one with spot and 1 wthout its one with spot usually 1 gone but put both in if you buy sum

Feb 06, 2014 | Dryers

1 Answer

Hoptoint CDT40G condenser tumble dryer pump running no heat or movement


hi i have a ctd40 mine wouldent go a few years ago on the heater i had three stats on one of them there is a tiny hole i pushed a sewing needle in hole it reset the stat you can see if you look at bottom of stat it might be concave so pushing it out set it again dryer then worked pull plug first

Apr 29, 2013 | Hotpoint Dryers

1 Answer

I have a stackable Frigidaire washer/dryer combo and the problem is that when you push the start button, you hear an electrical buzzing but the dryer won't start. When you take the panel off it st


Hello Mike Brady - From what you have described it seems like the dryer is experiencing a wiring failure or a communication error with the control board. Contact a professional to move forward accurately.

Jan 08, 2013 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Washer only start when drier is on.


Hello Reinaldo Rivera - From what you have described the unit seems to either have a communication problem with the control, an issue with the wiring harness or a faulty door switch. Try resetting the unit by flipping the household circuit breaker or unplugging. Wait approximately two minutes and turn on the washer. Select a normal cycle and if issue continues then I suggest contacting a professional to move forward accurately.

Oct 11, 2012 | Frigidaire FEX831CS Top Load Stacked...

Not finding what you are looking for?
Frigidaire FEX831CS Top Load Stacked Washer/Dryer Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...