Question about Sony Handycam DCR-DVD108 DVD Camcorder

2 Answers

Problem when connecting from cam corder to PC

Hello,
I have just installed the software on my laptop, and am now trying to establish a connection between the laptop and cam corder in order to ultimately save a video on my PC. On the screen of the cam corder I receive the message: "Connecting... Do not unplug the USB cable. Do not turn off the power." This message has been displayed for many minutes. There is a physical USB connection between the two devices, and I am trying to pull video from the cam corder disk to my PC. Do you have a suggestion?
Regards,
Ron

Posted by on

  • whitey97 Sep 18, 2008

    I have the same problem. I am using XP.

  • anil joshi Oct 09, 2008

    sir I have sony handycam HC36E which is recording the videos fine. Today I was trying to get the recorded stuff on my LENOVO laptop after installing the software from the provided floppy-disc. the file I opened using ICON on the desktop. I couldnot get it linkd with the handycam. The handycam is charged, connecttions are correct, taptop is in top condition, i.e. no virus,. Please advise.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a sony handycam carl zeiss vario-tessar and i just recorded a video on tape. I have a USB cable from a Vtech camera and I am trying to use it to transfer the video to my PC. So then I can send it through email. I also have a memory stick in the camera, maybe that would help me get the video to my PC. There is another cable that seems like it should work but when I plug it into the PC nothing happens. Please help me get this video to my PC so i can email it out.

Posted on Oct 01, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Please mention what operating Windows your are using in laptop. Windows xp or vista.

Posted on Sep 08, 2008

2 Suggested Answers

SOURCE: problem connecting cam corder to my laptop, remains in connecting status

Yes, it takes a while but will work eventually

Posted on Sep 23, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect moto z3 to internet to use in laptop..


Hello, motorola phone pc suite or phone tools software no longer works for using net from mobile. It may better to use bluetooth dongle to connect net. Just purchase a bluetooth dongle then install driver n on your phone's bluetooth and connect it with dongle select PAN connection if possible otherwise make dial up connection. This will surely work
Hope this will solve your problem...

Jul 24, 2010 | Motorola Mobility MOTORIZR Z3 Cellular...

1 Answer

I have no video player (as funny as that might sound) at home. I have a JVC GR-FX220A cam corder. The only means to tranfer a video I shot is through my Packard Bell imedia mc 2770. This I have never done...


Yellow: video.
White/Red: left/right audio to/from a "stereo" device.
White: audio to/from a "mono" device, such as the single microphone inside your cam-corder.

Connect yellow-to-yellow.
Connect white-to-white.
Tell the software on your PC that the input is "mono" (not "stereo"), so that it will "replicate" the single audio-input onto both "stereo" channels.

May 26, 2010 | Computers & Internet

1 Answer

Hi.. I have a jvc 32 X cam corder that i want to down load my videos onto my computer and am not sure how..


Two things here. Is your cam corder a digital one? If so there should be a connector on it for either firewire or USB, and if not, you will need some kind of video capture device if your cam corder has outputs on it. If not, you will need a player (vhs-c or 8mm or whatever your format) that can send out to the computer. Once this connectivity is done, you need video capture software that will "encode" the video files that will be produced. If your cam corder is already data (hard drive onboard or SCD card recording, you will only have to "demux" the format you have into the format that you are seeking (ie.. MPG to AVI or so on).
I hope that helps you out.. let me know if you need more clarification. It also might help if you give the media you have (VHS-c etc.) and the available outputs that you see on your cam corder. Thanks!

mrstan

Aug 29, 2009 | Video Cameras

2 Answers

JVC GZ - HD10AA Camcorder.


Fixya does not run any training courses. What software are you using to create the movies to play on your TV ?

Mar 26, 2017 | Canon ES10V Camcorder

3 Answers

Getting the video tape contents to PC


I can't seem to find your model number anywhere. Are you sure that's right? Recheck and see if any of these manual numbers might be your model. If so, one of these manuals should provide all the info you need. http://camera.manualsonline.com/manuals/mfg/jvc/jvc_digital_camera_product_list.html

Apr 05, 2017 | JVC HZ-ZS13U Rear Servo Zoom Focus/Zoom...

1 Answer

Downloading video from cam corder


I would try the following:

1) check for an update to the image mixer software here

2) see if jvc customer support can/will help

3) uninstall the image mixer software and try using windows movie maker instead

Aug 21, 2008 | JVC Video Cameras

1 Answer

I have a sont dcr trv120e cam corder .. when i plug it in pc nothing happens :(


Hello,
Please install software "Picture Package" CD came with camera. Connect USB cable to camera and other end of cable to PC. Windows XP or Vista will recognize it and install its drivers automatically. If camera is not recognized by Windows, go to camera Menu, enable USB Streaming and check. Hope info will help you.
Regards,

Aug 20, 2008 | Sony Cameras

1 Answer

Cam Corder Connection To PC


Your PC must have DV port for DV signal.
You can connect your camera with PC through USB port only.
Try to find DV card for PC in local computer market.

May 27, 2008 | Sony Handycam DCR-TRV250 Digital Camcorder

1 Answer

Unable to connect vdr-d250 to pc


I think that the following are to be taken care of first:
1.Cam corder to pc cable is properly connected.Some call it as 1384 connection also.
2.Cam corder should also be run on play mode for transmitting a/v signals to pc to decipher.
3.Ur pc also should have been installed with codec for processing the signals .
4.Your pc also should be usb.2.0 capable.
5.The media on the cam should not be protected for free playing along with pc.
If all the above are checked you would have cracked clear right.
good luck.

Feb 05, 2008 | Panasonic VDR-D250 DVD Camcorder

Not finding what you are looking for?
Sony Handycam  DCR-DVD108 DVD Camcorder Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

102366 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...