Question about Crosley CE35100AA Electric Kitchen Range

2 Answers

Gas kitchen range

My burner doesn't light. What do I do?

Posted by Anonymous on

  • graham mcdonald May 11, 2010

    which burner, surface burners or oven

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What if ALL 4 burners fail to spark and thus won't light up? Do we need to replace one igniter or 4 burner switches?

Posted on Dec 23, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 74 Answers

Most problems with gas ranges have to do with the flame--either it isn't quite right or it's nonexistent. Most new gas ranges have "electronic ignition," a spark igniter that starts the flame as gas flows through the burners. If, when you turn on a burner, it fails to spark but you hear sparking at other burners, the igniter or the burner switch probably needs replacement by an appliance repairperson. If your range has a pilot light, be sure the pilot light is lit.

Posted on Jan 18, 2006

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 341 Answers

SOURCE: frigidaire gas range ES100 oven will not light

I had a similar problem with my Kenmore and it was the Igniter. Cost me about $85.00 for a new one. Sometime on the back of the range there is a little pocket where sometimes a schematic is there and ( I don't know about your Frigidaire) but with my Kenmore it gave troubleshooting info that was very helpful in determining the problem.

Posted on Jul 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Burner on the top of the stove does not light,doesn't seem to have gas flow


i have the same problem with mine but i was cleaning mine with mr muscle which got in the holes where the gass comes out. i havent found a fix yet. im just hoping it will dry out n start working again

Jul 05, 2012 | DCS RGS-486GL Stainless Steel Gas Kitchen...

1 Answer

I have a gas stove/oven the ignitors to the top clicks but doesn't spark and the oven doesn't work at all?maytag performance


Number 13 and 22 is the parts I suspect.

13 is the ignitor which even if it glows could be weak, It must pull at least 3.5 amps to open the gas safety valve. The spark module(number 22) could also be weak and not putting out enough juice to light them burners. Seen it.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Sep 18, 2011 | Maytag MGS5770 Gas Kitchen Range

1 Answer

Unable to locate where o re-light the bake burner on this spectra xl44 oven


Hello,

Your oven does not use a pilot light it has a electric igniter that comes on when the oven is turned on and that is the most common thing thats wrong with a gas oven when it doesn't heat ..that the electric igniter is defective


GENE

Sep 16, 2011 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I have a Whirlpool Gas Range with Accu-Bake. On one of my burners the igniter comes on but the burner will not light. You can hear the clicking, but no flame. Is there something that I should clean and...


Hello,
In addation to the spark do you hear th egas flowing as well? if you do hear the gas and can light it with a match/bbq lighter but it doesn't light with the spark,it could be cleaned by using a safety pin/paper clip and push through the holes where the flame burns all around the burner(s) also steel wool will clean the burner.

Gene

Aug 14, 2011 | Whirlpool Gold GW399LXU Gas Range

1 Answer

Stove sparks but doesn't light


Hello,

If gas flows and burner sparks,the holes in burner near where the electrode(spark plug) is are clogged. A safety pin or paper clip pushed through those burner holes will clear the blockage

Good luck
I hope this helps,if it does please give me a 4 thumbs up rating&and perhaps a testimonial :)

Gene

Jul 30, 2011 | Whirlpool Accubake RF362LXTB (Dual Fuel)...

Not finding what you are looking for?
Crosley CE35100AA Electric Kitchen Range Logo

Related Topics:

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosley Kitchen Ranges Experts

Vitaliy Gins
Vitaliy Gins

Level 2 Expert

78 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

22072 Answers

Are you a Crosley Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...