Question about Motorola DCP-501 Receiver

1 Answer

Regarding Activation The Phantom999

Hi Jay this is Freddy I just purchased the Phantom and its not working and I explained it to you that it was not for me and it was for my father in law 72 years old and hes very dissapointed I need for you to send me how to install the box . I would really appreciate if you can call me back at this number at 1-347-341-6758 I hope you can return my call as soon as possible or email me the instructions how to install the box cause I put it to scan on CATV and whats showing up is call your cable provider and thats nto what we tlaked about thank you very much .

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need to know how to hook up im using vidio cable supplyed dont have s connection. i get nothing on my tv thanks ray

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Downloaded game ok,now asking for activation code.i cant find this anywhere


For games bought physically (eg - go into a store and purchase the box), check the documentation in the box, the CD sleeve if the game was packaged inside a CD case or paper sleeve. Most software comes with a "software key", usually 25 alphanumeric characters.

If the game was purchased and downloaded online, check your email, if you registered for an account through the software vendor or game publisher/distributor. For a service like Humble Bundle, check your purchases and look for software key or redemption procedure.

Mar 22, 2015 | Phantom EFX Reel Deal Slots: Enchanted...

1 Answer

I have Reel'em In and I recently bought a new computer and installed this game. When I type in the activation key the message comes up that the key is used too many times and to contact Phant


Looks like you've bought a pirate copy (or your activation key has been compromised). Yoou're to contact seller and/or Phantom with a proof of purchase.

Nov 07, 2014 | Computers & Internet

1 Answer

Where can i get a fan controller to replace original on my phantom nxzt computer case?


You may want to check with the manufacturer, NXZT regarding your case, especially if it's still under warranty. If it is not under warranty, then you can likely purchase the component you need from them for a reasonable price.

Here's their customer service inquiry page from their website:

http://www.nzxt.com/new/support.php

Jan 11, 2012 | Computers & Internet

1 Answer

Hi, I bought the Shure Beta 98H/C phantom powered clip on mic and was told(and read online) I could use the MX1BP as a battery preamp for the microphone when phantom power was not available. So looking at...


That will not work. The Beta 87H/C already has a preamp built into it. That preamp requires phantom power. The MX1BP is another preamp, so you would not need it, due to the preamp that is built in.

If you do not have phantom power available, then purchase an external phantom power supply.

Apr 18, 2011 | Shure MX1BP Microphone

1 Answer

I have a Yamaha IM8. I had a condenser mic hooked into channel one with phantom power on. I had to leave the room for a while and when I came back, I noticed some rather severe popping in the audio. I turn...


There is really no way for a condenser mic to damage the board UNLESS you break the ground and get a static discharge into the input. That can happen with any microphone and has NOTHING to do with the phantom being on or off. As phantom power goes on and off slight bias at the input preamps can make amps non-linear causing the raspy sound you heard. The Phantom LED means NOTHING as it shows the state of the phantom switch by connecting a 12 volt source through a resistor to the LED... It shows NOTHING regarding the state of the 48 volt supply. Each input circuit has two 6.8Kohm resistors to the swinger of the phantom switch 2nd pole that either grounds those or connects them to a filtered 48 volt source. As long as you don't have a static buildup there is NO need to turn phantom power on or off while connecting a condenser microphone. At each input when using the XLR jacks are two per side 470pf capacitors for RF bypass. For the XLR's there is a 10Kohm between the signal lines and two series 10mfd/50 volt caps in series of each input to block the DC, when using phantom power, from reaching the preamp stage. These caps have to charge and discharge when changing the state of phantom power so you should AVOID having the main amps being driven while changing the state of any phantom power. Always have the fader(s) down and any monitors down to avoid a thump and also the non-linear raspy transition as the input caps charge/discharge. So fix the microphone... don't know what type you have, but DO check the cable (first) as ALL three conductors MUST be good for a condenser mic to work on phantom power. A ground leakage or noisy connection will cause your symptoms. Use a SHORT known good cable right at the board to test the mic. The 48 volts is applied through the two 6.8K resistors between both the signal lines to the shield of your XLR cable. The microphone picks off the 48 volts with a similar circuit.
Now let's cover a very important thing regarding system safety: ALL, and I do mean ALL interconnected equipment MUST be powered from the same source. Professionals run a power cord back to their mixer right alongside the snake. This is to avoid ground bounce damage due to bad building grounds or ground faults.

Mar 22, 2011 | Yamaha IM824 24 Channel Mixing Console IM8...

3 Answers

Pls help meto activate my vbag i need an activation code my IMEI is 351502041118084


YOU DID NOT PROVIDED INFORMATION REGARDING WHAT PHONE MODEL YOU HAVE SO READ CARE FULLY I AN PROVIDING UNLOCK KEY FOR ALMOST ALL VBAG AVAILABLE.
FOR S60V3 MOBILE(EXAMPLE N73,N80 ETC)
ITS 800900113905840123456789012345. THIS KEY IS FOR VBAGX V1.25 FOR S60V3 MOBILES.

JUST TRY THIS ONE AND IF YOU FAIL TO REGISTER THEN PROVIDE US INFORMATION REGARDING YOUR HANDSET AND VBAG VERSION.
ALWAYS USE FIXYA TO FIX YOUR PROBLEM.

Mar 02, 2011 | Cell Phones

1 Answer

Hi i purchased an NT1-A mic . But after installing the cable to the mic . The mic does not respond. I had tried my previous mic and it works instantly.I suspect its faulty .


did you conect the phantom power? even if you conect the phantom power in the mixer it will not work if you use a cable unbalenced.

Feb 09, 2011 | Rode NT1A Professional Microphone

1 Answer

What is the switch for on the Phantom power unit at the end of my AKG C747?


Hi,the switch for the phantom power on the microphone is to activation of the mic.Without the phantom being activated, the mic will not work.

It can only be activated with a mixer console that has a phantom activation on it. After connecting the mic to the mixer,activate the phantompoweronthe mixer and switch on the phantom power on the mic,and problem solved.

Note: Mic will not work if no phantom activated on the mixer.

Oct 20, 2010 | AKG C747 Professional Microphone

1 Answer

I'm buying a Rode NT1A, it comes with a shock mount, pop filter, xlr cable etc. What else besides a USB converter cable to I need to have this mic work it's full potential on a PC?


Hi, what else do you do think you will need? I don't think you will need any other thing except that before you use the mic, the switch for the phantom power on the microphone is to be activated .Without the phantom being activated, the mic will not work.

It can only be activated with a mixer console that has a phantom activation on it. After connecting the mic to the mixer,activate the phantom power on the mixer and switch on the phantom power on the mic,and problem solved.

Note: Mic will not work if no phantom activated on the mixer.

That all you will need .

Thanks for using fixya....

Oct 20, 2010 | Rode NT1A Professional Microphone

Not finding what you are looking for?
Motorola DCP-501 Receiver Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Audio Players & Recorders Experts

Steve

Level 3 Expert

3287 Answers

jhnolson

Level 3 Expert

647 Answers

InstaRep
InstaRep

Level 2 Expert

60 Answers

Are you a Motorola Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...