Question about Xerox Phaser 3200MFP/N Laser Printer

1 Answer

Hello MY profile is not being seen by the Customers If you can see thanks and I gave you a solutin to tthe Jerry Rig

Posted by on

  • Jayson Brollini
    Jayson Brollini Sep 06, 2008










    Xerox 6110 -- paper jams from hell!

















    posted by peteshaw on Sep 06, 2008

    Report abuse





    Hello,

    I
    have been searching and searching and I am trying to determine if this
    color laser is worth saving. I have had it for about 9 months of very
    light family use.

    Then gradually the paper feed mechanism has
    gotten worse and worse. At first, if it would mis-feed or jam once
    every two or three times, now it cannot print at all. It either doesn't get the paper, or pulls it in, but prints vertically of center and then jams inside the printer.

    What it
    does is that the one big roller that sucks the paper in from the paper
    tray, the one in the middle rear of the printer jsut over the tray,
    does not feed the paper in correctly. I have seen that other people
    have had the same problem and fixed it, but I am not sure what would
    work in my case.

    Help! If I can't fix this soon, then I am
    going to have to freecycle/craigslist this thing and buy another, and
    that seems awfully wasteful. Is it even worth taking to a service
    center? That would involve a twenty minute drive, and repair costs.

    I appreciate any help of advise I can possibly get. Many thanks.
    --Pete Shaw






    Comment by peteshaw, posted on Sep 06, 2008
    Sorry, but you aren't telling me anything I haven't thought of or tried already.

    I
    have tried both of those things already and neither worked. I need to
    fix the roller that is pulling the paper into the printer. I have tried
    cleaning it out, and as much as I can without tools, and there is no
    debris.

    I have tried wiggling the paper tray around and removing
    it and putting it back in, and it worked for a while, but now even that
    doesn't work.

    I don't think it is worth spending more than, say, a hundred dollars to repair the printer.

    Comment by peteshaw, posted on Sep 06, 2008
    Thanks, but thats Xerox's web site, and I've been through that already.

    I
    posted this problem after I had exhausted all of the resources I could
    find on the web. the idea is that I have exhausted everything I could
    find on the web, and still am unable to fix the problem.

    Is there some way I can jerry-rig the roller to work? Some way I can fix the printer without paying to get it serviced?





    Solution #1
    posted on Sep 06, 2008




















    leethedeuce




    Rank: Guru

    Rating: 86%, 151 votes








    If
    the printer is only 9 months old then the parts are still covered under
    warranty and you would only have to pay for labor, which should not be
    much. So your two best economical solutions are authorized repair under
    warranty if its under a year old, or replacement. I hope you found this
    at least helpful and if so I would greatly appreciate if you could
    accept and rate accordingly.
    Thanks,
    Lee














    Thank You!



    Was the solution helpful?

    Show your appreciation by commenting on xerox 6110 -- paper jams from hell!:










    I don't want to Accept this solution
















    Solution #2
    posted on Sep 06, 2008
















    Kindofcheap




    Rank: Wiz

    Rating: 78%, 30 votes








    HI if you can see my comment please (rate ) FixYa

    When you removed the roller look at the teeth on the plastic gears on the roller and inside the printer.

    make sure that the Rubber/Nylon belt drive is on correctly and that it is not too loose.. It should have a little play in it.

    Also if the paper is being pulled to ******* one side(feeding in)
    I have seen this happen to my printers and the problem was the the belt so please post

    Thank You

    Kindofcheap

    Kindofcheap





    Comment by Kindofcheap, posted on Sep 06, 2008JERRY RIG cool hey that should work... lol
    Well I also wanted to mention th small little motor inside that
    turns turn the gears (VERY CHEAP) and radio shack or an electronic parts store will carry it. That Could be the problem too.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I do not see your solution.

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After printing each page, the product gives paper jam alert? Though no jamming can be seen.


Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 25, 2010 | HP Officejet J5780 All-In-One Printer

1 Answer

Canon Pixma 160 page feed problem.


Hello there Well I can only say try try.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 23, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Attempting to replace the ink cartridges (which i have done many times), but there is a card in front of the cartridges that prevents removal of the ink cartridge (that I've never seen before)


Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 21, 2010 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Hallo, the power botton don't work everytime. What can I do?


try taking apart the keypad... and messing with the button... you might be able to jerry rig it... here is the

caveat... you very well might break the keypad taking it apart...

your only other choice is to call a service place and see how much they will do it for...

Dec 21, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

Have a new printer. need a update on the lexmart 6570 black ink .


Hi Jerry, Have you checked the Lexmark website, sometimes they have a FAQ section that might help.

Aug 19, 2009 | Nukote Nu-kote RF196 Black Refill Kit

1 Answer

I want to increase fils memory


hello usama you need to delet some files
the software performs an unexpected function
if you want to increase memory you need HDD more than 40 GB search for same kind HDD of your copier

Sep 11, 2008 | Ricoh Aficio 1085 Laser Printer

1 Answer

Only Prints in Magenta


The cartridges may still be at fault, or there is a problem with the processor board in the printer. I have also seen problems with the ink jets in these.


Jerry G.

Apr 19, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

Reg. Installation of Apollo P-1200 Printer on Windows XP


This driver is provided by Microsoft and is included with the Windows XP os.

Installation instructions:
1: Click START, then click on PRINTERS & FAXES
2: Click on ADD A PRINTER
3: At Welcome screen click NEXT
4: Select LOCAL PRINTER (if printer is attached directly to computer) and click NEXT
5: Choose LPT1 (in most situations) or a different port if not LPT1 then click NEXT
6: Select Apollo in left window
7: Select Apollo P-1200 in right window
8: Click NEXT
9: Type name for printer or accept default name
10: Click No to "Do you want to print test page".
11: Click FINISH
12: Test printer by sending a print job to printer.

If you experience problems after installing this driver, please consultthe printer user manual for proper lpt bios settings. eg: spp, ecp,etc. and change the lpt pc bios settings to match manufacturer'ssuggested settings. quote.gif Jerry K View Public Profile Send a private message to Jerry K Find all posts by Jerry K reply.gif

Mar 04, 2008 | Pitney Bowes Hewlett Packard HRK-300 Black...

1 Answer

Scanner


1. Create a new user, login and try to use the software...the user profile you are using could be corrupt...I have seen HP Director act really strange due to a profile problem

2. Fully uninstall the software via Add/Remove Programs, rebooting. Re-installing the software, rebooting then trying the program again.

3. Try the device in a different USB port (force the hardware to reinstall in a default style.

Hope this helps!

Oct 10, 2007 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
Xerox Phaser 3200MFP/N Laser Printer Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...