Question about Polycom Small ClassStation VSX 8000 (223022120001)

1 Answer

Vsx 8000 "visual concert vsx" screen

Hi, maybe you could help. i'm experiencing this same problem and neither pressing nor holding the asterisk button (*) on the remote switches the main monitor output to the RGB output. additionally, hooking up an s-video connection instead gives me just a blank blue screen.

any ideas?

thanks


posted by grandgecko on Jan 16, 2008 Report abuse

I am tring to get get the mac address off my poly vsx8000 and i went through the intail setup process and when it rebooteed it gave me a blue screen that reads visual concert vsx but no main page or directoy after that, what could the problem be and how can i get back to directory to get the mac address?
Post Solution Work Queue --> Have the same problem? --> Have the same problem? Click Here
X This Problem has been added to the Share Your Expertise Page under "My Work Queue". OK Solution #1 posted on Feb 08, 2008

jrzboy
Rank: Apprentice
Rating: 0%, 0 votes
Power on unit, press and hold * key on remote takes a few minutes but spinning polycom logo will appeara and a minute or two after that the menu screen comes up. Main output is configured for S-video, your seeing a 2nd monitor output, doing above will switch the VGA to be main output.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This worked for me thank you very much

Posted on Oct 18, 2012

1 Suggested Answer

  • 1 Answer

SOURCE: help me

Power on unit, press and hold * key on remote takes a few minutes but spinning polycom logo will appeara and a minute or two after that the menu screen comes up. Main output is configured for S-video, your seeing a 2nd monitor output, doing above will switch the VGA to be main output.

Posted on Feb 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i assign numbers to flex buttons


I have a similar phone, the IP8830. Press the button to the left of the round button (looks like a cog) . This is the configuration menu key. Press 1 then 2 and get your IP. Once you have your IP, enter it in your web browser so it looks like this (http://192.168.1.200:8000) . The default user name on mine is "private" and the default password is "lip" . Once you are logged in you can go to "Phone Settings" and set the number of lines on the keys. Next you can go to "Programmable Keys" to set your BLF and Speed Dial Keys. I am using SIP firmware with a Asterisk PBX so yours may be different. My firmware version is "1.1.04spbx_a" .

Nov 06, 2014 | LG Ericsson LIP-8012D 12 Button IP Phone

1 Answer

How to reset the password of polycom hdx 7000


You can use the hardware restore button on the Polycom HDX system to reset
the system in one of these ways:
• Restoring configuration-Restores the configuration, which resets most
system settings to default values.

• Factory restore-Completely erases the system and restores it to the
software version and default configuration stored in its factory partition.
If you follow this procedure while a USB storage device is connected, the
system restores from the USB device instead of the system's factory
partition.
The restore button is on the front of the Polycom HDX 9000 series system, as
shown in the following figure.

1.png



The restore button is on the front of the Polycom HDX 8000 series, Polycom
HDX 7000 series, and Polycom HDX 4000 systems, as shown in the following
figure.

2.png


The restore button is on the left side of the Polycom HDX 4500 system, behind
a wire mesh screen, as shown in the following figure.


3.png


Use a paperclip to press the restore button through the wire mesh covering
that side of the system. to reset the HDX Series system we can press the restore button over 15 second.

Feb 27, 2014 | Polycom VSX 7000 Video Conference

1 Answer

3 way video conf


Your VSX 6000 does not support Multipoint. YOu will have to move up to the VSX 7000 or 8000. The VSX 7000 supports MP and the VSX 8000 supports 6 site mp if you have that option installed. DAVID

Dec 12, 2012 | Polycom VSX 6000 (220022222001) Video...

2 Answers

How to reset VSX 8000 to factory default - Forgot the password


RTFM!!!
section 8, page 4

System -> Diagnostics -> Reset system
you will need serial number for this

good luck.

May 03, 2009 | Polycom (VSX 8000/VORTEX EF2280 ) (Bundle)...

2 Answers

Polycom VSX7000 video camera


Hi there:

This happened to my VSX camera and the fix was simple. I have a VSX 8000 so if your camera is different then mine you might not be able to follow this. This might not work for you but, try it. On the back of the camera you'll find a small little screw. Keep the system on and watch your cameras image. Start to loosen the screw. You'll only have to do it a little bit and the camera should start to focus again. Tighten the screw up (maybe not as tight as it was before) and test to see if it's auto focusing. Also....manually moving the camera around while it was on could have helped as well. Finally....I did not have to do this but if it is not working simply by loosening the screw...I would take it all the way out and remove the little cover or hatch that it holds. Poke around in there a little bit to see if the the focus motor unsticks itself. If you are still under warranty (I was not) don't do this...call the vendor who sold it to you.

Mine's working great now simply by loosening this little screw and tightening it back up.

Feb 04, 2009 | Polycom VSX 7000 Video Conference

2 Answers

Polycom VSX 8000-- cant hear


try increasing the volume using the remote. Also have you connected external speakers?

Let me know.

Apr 08, 2008 | Polycom Small ClassStation VSX 8000...

1 Answer

Help me


Power on unit, press and hold * key on remote takes a few minutes but spinning polycom logo will appeara and a minute or two after that the menu screen comes up. Main output is configured for S-video, your seeing a 2nd monitor output, doing above will switch the VGA to be main output.

Jan 16, 2008 | Polycom Small ClassStation VSX 8000...

Not finding what you are looking for?
Polycom Small ClassStation VSX 8000 (223022120001) Logo

Related Topics:

1,296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Conference Phones Experts

Danny Nagdev

Level 2 Expert

47 Answers

pbxinc

Level 2 Expert

61 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Polycom Conference Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...